Range of pressure transmitters with stainless steel bodies. Maximum working pressure 10.0 to 200.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

1/2 in - 14 NPT female 1/2 in - 14 NPT male / 1/4 in - 18 NPT female DIN EN 837-1 G 1/2 B Front bonded G 1/2 in

Marking:

ABB, model, serial number & technical info on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

PAS100.X.Y.GW/GA & PGS100.X.Y.GW/GA Where X denotes the pressure and can be replaced with any of the following sensor range (and max working pressure): C = 60 mbar (10.0 bar). F = 400 mbar (10.0 bar). L = 2500 mbar (30.0 bar). D = 10 bar (60.0 bar). K = 40 bar (80.0 bar). R = 100 bar (200.0 bar). Where Y denotes the connections and can be replaced with any of the following: A = 1/2 in - 14 NPT female B = 1/2 in - 14 NPT male / 1/4 in - 18 NPT female C = DIN EN 837-1 G 1/2 B P = Front bonded G 1/2 in

Approval Holder:

ABB S.p.A

Company Name

ABB S.p.A

Address

Via Vaccani, 4 Tremezzina (loc. Ossuccio)

Postcode

22016

Country

Italy

General Email

matteo.gaffuri@it.abb.com

View All Listings by this Company

Manufacturer:

ABB S.p.A

Company Name

ABB S.p.A

Address

Via Vaccani, 4 Tremezzina (loc. Ossuccio)

Postcode

22016

Country

Italy

General Email

matteo.gaffuri@it.abb.com

View All Listings by this Company

Water control valve with a DZR brass body and EPDM ‘O’-rings. The product incorporates a pressure sensor, ultrasonic sensor, temperature sensor and a motorised spherical valve with a DZR brass ball (chrome plated) and PTFE seats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2207042

Note:

This product has not been tested or approved for leak detection and automatic shut-off claims made by the approval holder.

Size:

¾” BSP (F) inlet and outlet.

Marking:

TOLLCO on adhesive label on body. CR, Size, flow arrow and HELA on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

2120013 Waterunit - Control (DN20).

Approval Holder:

Tollco AB

Company Name

Tollco AB

Address

View All Listings by this Company

Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2209020

Note:

The monitor has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and has not been checked for accuracy by the Scheme.

Size:

¾” female BSP inlet x ¾” male BSP outlet.

Marking:

Sol, Model and product information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

Solution MX1

Approval Holder:

Waterman Environmental Group

Company Name

Waterman Environmental Group

Address

SOLmicroTEK Ltd., Cotswold Business Centre, 2, AP Ellis Road, Upper Rissington, Gloucestershire

Postcode

GL54 2QB

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104076

Size:

1 ¼” BSP (F) – 2” BSP (F)

Marking:

Stuart Turner, model number and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

HM 0302 230 M 50 HM 0303 230 M 50 HM 0304 230 M 50 HM 0305 230 M 50 HM 0306 230 M 50 HM 0307 230 M 50 HM 0308 230 M 50 HM 0309 230 M 50 HM 0302 230-400 T 50 HM 0303 230-400 T 50 HM 0304 230-400 T 50 HM 0305 230-400 T 50 HM 0306 230-400 T 50 HM 0307 230-400 T 50 HM 0308 230-400 T 50 HM 0309 23 0-400 T 50 HM 0502 230 M 50 HM 0503 230 M 50 HM 0504 230 M 50 HM 0505 230 M 50 HM 0506 230 M 50 HM 0507 230 M 50 HM 0508 230 M 50 HM 0509 230 M 50 HM 0502 230-400 T 50 HM 0503 230-400 T 50 HM 0504 230-400 T 50 HM 0505 230-400 T 50 HM 0506 230-400 T 50 HM 0507 230-400 T 50 HM 0508 230-400 T 50 HM 0509 23 0-400 T 50 HM 0902 230 M 50 HM 0903 230 M 50 HM 0904 230 M 50 HM 0905 230 M 50 HM 0906 230 M 50 HM 0907 230 M 50 HM 0902 230-400 T 50 HM 0903 230-400 T 50 HM 0904 230-400 T 50 HM 0905 230-400 T 50 HM 0906 230-400 T 50 HM 0907 230-400 T 50 HM 0908 23 0-400 T 50 HM 1502 230 M 50 HM 1503 230 M 50 HM 1502 230-400 T 50 HM 1503 230-400 T 50 HM 1504 230-400 T 50 HM 1505 230-400 T 50 HM 1506 230-400 T 50 HM 1507 23 0-400 T 50 HM 2002 230 M 50 HM 2002 230-400 T 50 HM 2003 230-400 T 50 HM 2004 230-400 T 50 HM 2005 230-400 T 50 Type code: HM XY Z L 50 HM: product name X: flow rate Y: number of impellers Z: motor voltage L: motor phase M=single phase; T=three phase 50: frequency

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2206044

Size:

SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.

Marking:

Ebara, model, CE and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2027

Model:

3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Range of shower outlets with plastic bodies (various finishes) incorporating a stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205010

Size:

½” BSP (F)

Marking:

Hansgrohe on shower face

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

26 093 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet Green 26 094 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet Green 26 095 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet LowPressure 26 096 xxx Hansgrohe Vernis Shape Overhead shower 200 1jet LowPressure 26 271 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet 26 277 xxx Hansgrohe Vernis Blend Overhead shower 200 1jet EcoSmart 26 281 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet 26 283 xxx Hansgrohe Vernis Shape Overhead shower 230 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets with plastic bodies (chrome plated), plastic spray plates (chrome plated or white coloured finish) and blue TPE nozzles. The inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2211800

Size:

½” BSP (F).

Marking:

Kohler Mira Limited on inlet.

Installation Requirements:

R001 R040

Expiry date:

30/11/2027

Model:

1.1799.001 (1740.462) Mira Beat 200mm Deluge Head (Chrome spray plate and body), 1.1799.002 (1740.535) Mira Beat 200mm Deluge Head (White spray plate and chrome body), 1.1799.003 (1740.459) Mira Beat 250mm Deluge Head (Chrome spray plate and body), 1.1799.004 (1740.534) Mira Beat 250mm Deluge Head (White spray plate and chrome body), 1740.562 Mira Nectar 200mm Deluge Head (Chrome spray plate and body), 1740.563 Mira Nectar 200mm Deluge Head (White spray plate and chrome body).

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower handsets and shower heads. The shower handsets have a plastic body (white), NBR ‘O’-rings, and a coloured locking ring around the shower face (see model section). The shower heads have a plastic body (white or chrome plated 02-093173 model), NBR ‘O’-rings, directional adjustment (ball joint) and a coloured interlocking ring either surrounding or central to the shower face (except for the 02-093165 and 02-093173 models which have no ring). The Wall shower T-L models have a combined NBR washer and stainless steel strainer on the inlet.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2209300

Note:

Open outlet used only. Claims made by the manufacturer for antimicrobial properties have not been tested and are not considered part of the approval listing.

Size:

Shower handsets: ½” BSP (M). Shower heads: ½” BSP (F).

Marking:

Shower handsets: T (T Johs. Tandrup A/S logo) on shower handset face. Shower heads: Wall shower T-L models: T (Johs. Tandrup A/S logo) on shower face. Wall shower C-L models: T-safe (brand of Johs. Tandrup A/S) on body. All models, expect for the 02-093173 model, also include a QR code.

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Proviso:

The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

Shower handsets: 02-031200 - Shower, S-L (Std. 0,8 Violet), 02-031201 - Shower, S-L (Std. 0,8 Yellow), 02-031202 - Shower, S-L (Std. 0,8 Green), 02-031203 - Shower, S-L (Std. 0,8 Blue), 02-031204 - Shower, S-L (Std. 0,8 light Grey), 02-031190 - Shower T-L (Std. 0,8 A , open Violet lock ring), 02-031191 - Shower T-L (Std. 0,8 A , open yellow lock ring), 02-031192 - Shower T-L (Std. 0,8 A , open Green lock ring), 02-031193 - Shower T-L (Std. 0,8 A , open Blue lock ring), 02-031194 - Shower T-L (Std. 0,8 A , open Grey lock ring). Shower heads: 02-091120 - Wall shower T-L (w. Green Notch), 02-091125 - Wall shower T-L (w. Yellow Notch), 02-091127 - Wall shower T-L (w. Blue Notch), 02-091128 - Wall shower T-L (w. Violet Notch), 02-091129 - Wall shower T-L (w. Grey Notch), 02-093165 - Wall shower C-L (std 1,2 Alpin/Hvid), 02-093167 - Wall shower C-L (std 1,2 Alpin/Violet), 02-093168 - Wall shower C-L (std 1,2 Alpin/Yellow), 02-093171 - Wall shower C-L (std 1,2 Alpin/Green), 02-093172 - Wall shower C-L (std 1,2 Alpin/Blue), 02-093173 - Wall shower C-L (std 1,2 Chrome/Grey 7047).

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of flow sensors with brass or plastic bodies (see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

1718 Switches

Section Subtitle:

Flow control.

WRAS Approval Number:

2206802

Size:

VY2060MA, MK or M prefix models: 1” BSP (M). VY2060K5 or K prefix models: 24.05mm OD.

Marking:

VY2060MA, MK or M prefix models: SIKA & flow arrow on body; SIKA and date of manufacture (WWYY) on adhesive label on cable. VY2060K5HN or KHN prefix sensor only models: SIKA and date of manufacture (WWYY) on adhesive label on cable. VY2060K5 or K prefix internal turbine models: Sika logo, model and date of manufacture (WWYY) on body.

Installation Requirements:

R001

Expiry date:

29/06/2027

Model:

Type series VTY20 Model keycode #1: VY2060abcdefgh ab: for body material: MA = brass body CW617N-DW, MK = brass body CW724R, K5 = plastic body (without turbine body, only the internal turbine system) cd: for sensor and signal output HN = Hall sensor-NPN, 00 = without sensor. ef: for electrical cable connection: Various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector. gh: for process connection A5 = G1 male thread, YY = without, only possible with ab = K5. Model keycode #2: VY2060abyyyyyzz or VY2060ayyyyyzz ab: for body material: MA = brass body CW617N-DW, MK = brass body CW724R, K5 = plastic body (without turbine body, only the internal turbine system) Or a: for body material: M = brass body CW617N-DW. K = plastic body (without pipe section, only the internal turbine system) yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …). zz: for consecutive number (2 digits, 01…99). VY2060abyyyyyzz and VY2060ayyyyyzz are customized versions, but technically identical with VY2060abcdefgh regarding all parts/components in contact with wholesome water.

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of deck mounted non concussive taps (chrome plated brass) incorporating a spring-loaded headwork operated via a single lever operating member. The outlet incorporates a flow straightener and the product is supplied with plastic backnuts. Maximum working pressure: 10.0 bar. Maximum operating temperature: 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

2205066

Size:

½” BSP (M)

Marking:

Intatec logo on body

Installation Requirements:

R001 R006

Expiry date:

31/05/2027

Model:

NC200CP.1 NC200CP5.1

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company