Range of domestic stainless steel indirect unvented hot water storage cylinders, incorporating a stainless-steel coil for connection to external heating resource. The secondary circuit is factory fitted with a temperature and pressure relief valve (7.0 Bar @90°C) and an immersion heater. Primary working pressure: 3 bar; secondary working pressure: 5.5 bar. Maximum operating temperature 90 °C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

251204705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F).

Marking:

Midea, model & tech info including pressure and capacity on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/12/2030

Model:

MT-S190W 180 litre water storage tank without electric heating MT-S190WE15 180 litre, 1500 watt electric water storage tank MT-S190WE30 180 litre, 3000 watt electric water storage tank MT-S270W 250 litre water storage tank without electric heating MT-S270WE15 250 litre, 1500 watt electric water storage tank MT-S270WE30 250 litre, 3000 watt electric water storage tank model codes: MT: Midea Tank S：Stainless W：Water cycle heater E：Electrical 190/270: water tank volume 190: 180 litre 270: 250 litre 15/30: the wattage of electricity 15: 1500W 30: 3000W

Approval Holder:

GD Midea Heating & Ventilating Equipment Co., Ltd.

Company Name

GD Midea Heating & Ventilating Equipment Co., Ltd.

Address

Penglai Industry Road Beijiao, Shunde, Foshan, Guangdong

Postcode

528311

Country

China

Phone

+86 13902810522

General Email

genrong.li@midea.com

View All Listings by this Company

Range of water meters with blue epoxy coated brass or iron bodies (see models) and a plastic strainer on the inlet. Maximum working pressure 16.0 Bar or10.0 Bar(see models). Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Company logo, size, flow direction on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

LXSG DN15 Dry dial, copper/iron shell, thread ,1/2” (M) BSP,16bar LXSG DN20 Dry dial, copper/iron shell, thread ,3/4” (M) BSP,16bar LXSG DN25 Dry dial, copper/iron shell, thread ,1” (M) BSP,16bar LXSG DN32 Dry dial, copper/iron shell, thread ,1-1/4” (M) BSP,16bar LXSG DN40 Dry dial, copper/iron shell, thread ,1-1/2” (M) BSP,16bar LXSG DN50 Dry dial, copper/iron shell, thread ,2” (M) BSP,16bar LXLG DN65 Dry dial, iron case, fixed flange - British standard DN65, 16bar LXLG DN80 Dry dial, iron case, fixed flange - British standard DN80, 16bar LXLG DN100 Dry dial, iron case, fixed flange - British standard DN100, 16bar LXLG DN125 Dry dial, iron case, fixed flange - British standard DN125, 16bar LXLG DN150 Dry dial, iron case, fixed flange - British standard DN150, 16bar LXSGY DN15 Dry dial, copper/iron shell, thread,1/2” (M) BSP,16bar LXSGY DN20 Dry dial, copper/iron shell, thread,3/4” (M) BSP,16bar LXSGY DN25 Dry dial, copper/iron shell, thread,1” (M) BSP,16bar LXSGY DN32 Dry dial, copper/iron shell, thread,1-1/4” (M) BSP,16bar LXSGY DN40 Dry dial, copper/iron shell, thread,1-1/2” (M) BSP,16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP,16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard DN65,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard DN150,16bar LXSGY DN15 Dry dial, copper/iron shell, thread, 1/2” (M) BSP, 16bar LXSGY DN20 Dry dial, copper/iron shell, thread, 3/4” (M) BSP, 16bar LXSGY DN25 Dry dial, copper/iron shell, thread, 1” (M) BSP, 16bar LXSGY DN32 Dry dial, copper/iron shell, thread, 1-1/4” (M) BSP, 16bar LXSGY DN40 Dry dial, copper/iron shell, thread, 1-1/2” (M) BSP, 16bar LXSGY DN50 Dry dial, copper/iron shell, thread, 2” (M) BSP, 16bar LXLGY DN65 Dry dial, iron case, fixed flange - British standard, DN65,16bar LXLGY DN80 Dry dial, iron case, fixed flange - British standard, DN80,16bar LXLGY DN100 Dry dial, iron case, fixed flange - British standard, DN100,16bar LXLGY DN125 Dry dial, iron case, fixed flange - British standard, DN125,16bar LXLGY DN150 Dry dial, iron case, fixed flange - British standard, DN150,16bar LXSK DN15 Wet-dial, copper shell, thread, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial, copper shell, thread, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial, copper shell, thread, 1” (M) BSP,10bar LXSK DN32 Wet-dial, copper shell, thread, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial, copper shell, thread, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial, copper shell, thread, 2” (M) BSP,10bar LXSK DN15 Wet-dial,copper shell, thread ,Bluetooth, 1/2” (M) BSP,10bar LXSK DN20 Wet-dial,copper shell, thread ,Bluetooth, 3/4” (M) BSP,10bar LXSK DN25 Wet-dial,copper shell, thread ,Bluetooth, 1” (M) BSP,10bar LXSK DN32 Wet-dial,copper shell, thread ,Bluetooth, 1-1/4” (M) BSP,10bar LXSK DN40 Wet-dial,copper shell, thread ,Bluetooth, 1-1/2” (M) BSP,10bar LXSK DN50 Wet-dial,copper shell, thread ,Bluetooth, 2” (M) BSP,10bar LXSKY DN15 Wet-dial,copper shell, thread , MBUS, 1/2” (M) BSP, 10bar LXSKY DN20 Wet-dial,copper shell, thread , MBUS, 3/4” (M) BSP, 10bar LXSKY DN25 Wet-dial,copper shell, thread , MBUS, 1” (M) BSP, 10bar LXSKY DN32 Wet-dial,copper shell, thread , MBUS, 1-1/4” (M) BSP, 10bar LXSKY DN40 Wet-dial,copper shell, thread , MBUS, 1-1/2” (M) BSP, 10bar LXSKY DN50 Wet-dial,copper shell, thread , MBUS, 2” (M) BSP, 10bar

Approval Holder:

Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name

Shandong Chenhui Electronic Technology Co.,Ltd.

Address

East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.

Country

China

Phone

+86 0531- 87856308

General Email

Joh.huo@meide-casting.com

View All Listings by this Company

Manufacturer:

Shandong Chenhui Electronic Technology Co.,Ltd.

Company Name

Shandong Chenhui Electronic Technology Co.,Ltd.

Address

East of Longteng Road South of Guihua Branch Road Tai'an High-tech Zone Taian City, Shandong.P.R.China Shandong.

Country

China

Phone

+86 0531- 87856308

General Email

Joh.huo@meide-casting.com

View All Listings by this Company

Range of ultrasonic water meters with brass/plastic bodies. The Iskrasonic 1000 MWU5 range inlets incorporate a plastic strainer and brass spherical ball valve with PTFE seats. The Iskrasonic 1000 IWU 100 range inlets incorporate a plastic strainer Maximum working pressure 16.0 bar. Maximum operating temperature 50⁰C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15 – ½” BSP (M x M), DN20 – ¾” BSP (M x M), DN25 – 1” BSP (M x M), DN32 – 1 ¼” BSP (M x M), DN40 – 1 ½” BSP (M x M), DN50 – 2” BSP (M x M).

Marking:

Flow arrow and, size on brass inlet outlet tube, manufacturers logo, QR code, size and technical data laser etched under digital display cover

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

Iskrasonic 1000 MWU5 & Iskrasonic 1000 IWU 100 Additional information. Meter is with modular design to support different communication interface like ( NB-IOT – GPRS – WMBUS – 4G- LoraWan – Lora – Mbus – RS485 …etc)

Approval Holder:

Iskraemeco Energy Measurement.

Company Name

Iskraemeco Energy Measurement.

Address

Plot #1 Pyramids Industrial West Park 10th of Ramadan City

Country

Egypt

General Email

mahmoud.salama@iskraemeco.com

View All Listings by this Company

Water meter carrier with DZR brass body. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (M).

Marking:

Altecnic logo, Altecnic, flow arrow, and CR on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

126-4101

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of metering stations with DZR brass bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” -2” BSP (F) inlet x ½” -2” BSP (M) outlet (DN15 – DN50).

Marking:

OV, flow arrow and DN cast on body..

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

1060644, 1060634, 1060604, 1060606, 1060608, 1060610, 1060612, 1060616.

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Manufacturer:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company