Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110066

Size:

EV1-EV3 & 1VR-3VR models - F (round flange) versions: DN25. EV6-EV20 & 6VR-20VR models - F (round flange) versions: DN32-50. EV1-EV20 & 1VR-20VR models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Franklin Electric, model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

EV and VR ranges. Code example (EV range): EV 20 /15 A B C D E F G H J K L M N PMP/A. Where: EV = Pump model EV (EV = E-Tech “brand”). 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version (EV1-EV20 & 1VR-20VR versions only). J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Code example (VR range): 3 VR0700 A B C X-XXXX. Where: 3 = Rated flow [m³/h] (varies: 1-20). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "H" - (AISI304/EN 1.4301); "N" (AISI316/EN 1.4401). B = Flange type: "F" - round; "T" - oval; "V" - Grooved (Victaullic); "C" - clamp. C = Mechanical Seal: “1” - QBE; “2” - QQE. X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): EV1/1VR: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); EV3/3VR: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV6/6VR: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV10/10VR: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); EV15/15VR: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); EV20/20VR: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (41491 & 41492 models) or 9.0 bar (41493 & 41494 models). Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2203051

Size:

1¼” BSP (F) inlet x 1" BSP (F) outlet

Marking:

STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2027

Model:

41491 - Multistage Pump 30, 41492 - Multistage Pump 40, 41493 - Multistage Pump 50, 41494 - Multistage Pump 60.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Fujian Fuan Wendy Electrical Machinery Co Ltd

Company Name

Fujian Fuan Wendy Electrical Machinery Co Ltd

Address

Qinxiyang Industrial Zone Fuan Fujian

Country

China

General Email

View All Listings by this Company

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205705

Note:

Open outlet use only

Size:

⅜”, ½” and ¾” BSP (F) (all models)

Marking:

COMPANY LOGO ON CONNECTOR

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

LB2110 CLASSIC 5" ROSE, LB2111 CLASSIC 6" ROSE, LB2107 CLASSIC 8" ROSE, LB1731 CLASSIC 12" ROSE, MK2108 MACKINTOSH 6" ROSE, MK2107 MACKINTOSH 8" ROSE, MK1730 MACKINTOSH 12" ROSE, LBN2110 EASY CLEAN CLASSIC 6" ROSE, LBN2107 EASY CLEAN CLASSIC 8" ROSE, LBN1731 EASY CLEAN 12" ROSE, MKN2108 EASY CLEAN MACKINTOSH 6" ROSE, MKN2107 EASY CLEAN MACKINTOSH 8" ROSE & MKN1730 EASY CLEAN MACKINTOSH 12" ROSE SHOWER OUTLETS

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Shower outlet incorporating brass body (gold effect finish), incorporating a flow regulator and EPDM O-rings. Maximum operating temperature 60ºC.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2203002

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

WATERWORKS Logo (W) on Showerhead Ball Nut.

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

RW01SH - R.W. Atlas 8

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London

Postcode

WC1N2EB

Country

United Kingdom

View All Listings by this Company

Shower head with a brass body (various finishes), incorporating EPDM O- rings and a stainless-steel strainer at the inlet. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2203020

Size:

½” BSP (F)

Marking:

Hansgrohe on side of shower head

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

26 734 xxx Hansgrohe Croma Overhead shower 220 1jet Low Pressure Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Shower handset incorporating a chrome plated plastic body and EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2203034

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Bestter on body

Installation Requirements:

R001 R040

Expiry date:

31/03/2027

Model:

BH11533

Approval Holder:

Bestter (Xiamen) Technology Inc

Company Name

Bestter (Xiamen) Technology Inc

Address

NO.601 TONGHONG ROAD TONG'AN PARK TONG'AN INDUSTRIAL ZONE XIAMEN CITY

Country

China

View All Listings by this Company

Manufacturer:

Bestter (Xiamen) Technology Inc

Company Name

Bestter (Xiamen) Technology Inc

Address

NO.601 TONGHONG ROAD TONG'AN PARK TONG'AN INDUSTRIAL ZONE XIAMEN CITY

Country

China

View All Listings by this Company

Ranges of overhead shower outlets with brass bodies, chrome plated plastic shower handsets, shower sets and shower kits. The shower sets comprise of a chrome plated plastic shower handset and shower hose. The shower kits comprise of a chrome plated plastic shower handset, brass wall elbow and either stainless steel interlocked, or PVC coated, shower hoses. The inlets of the shower handsets incorporate a plastic flow regulator at the inlet. Shower kits with ½” (M) inlets are also supplied with a brass wall elbow which incorporate a plastic flow regulator and an approved single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201077

Note:

Open outlet use only.

Size:

Please refer to model.

Marking:

Ideal Standard, Armitage Shanks or Sottini (all brands of Ideal Standard (UK) Ltd.) on shower handset or overhead shower outlet.

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

B9408AA Idealrain S1 shower kit with 80mm 1F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9410AA Idealrain S3 shower kit with 80mm 3F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9449AA Idealrain S1 shower set with 80mm 1F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9450AA Idealrain S3 shower set with 80mm 3F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9413AA Idealrain S1 shower kit with 100mm 1F handspray 600mm rail and 1.35 hose - ½” BSP (M) B9416AA Idealrain M3 shower kit with 100mm 3F handspray 600mm rail and 1.35 hose – ½” BSP (M) B9556AA Idealrain S3 shower kit with 80mm handspray, 900mm rail and 1.8m hose - ½” BSP (M) B9306AA Armaglide 2 - Shower kit with 1 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9307AA Armaglide 2 - Shower kit with 3 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9308AA Armaglide 2 - Shower set with 1 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9309AA Armaglide 2 - Shower set with 3 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9836AA – Idealrain Pro M3 Shower kit with 900mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9829AA – Idealrain Pro S1 shower kit with 600mm rail, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9830AA – Idealrain Pro S3 shower kit with 600mm rail, 3 function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9833AA – Idealrain Pro M1 shower kit with 600mm rail, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9834AA – Idealrain Pro M3 shower kit with 600mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9835AA – Idealrain Pro M1 shower kit with 900mm rail, single function 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9841AA – Idealrain Pro S1 shower kit with handspray holder, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9843AA – Idealrain Pro M1 shower kit with handspray holder, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9489AA Idealrain M3 shower set, 100mm handspray, hose, & hose retaining ring - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B1038AA Borbera L3 Shower Kit - ½” BSP (M) B9400AA - IDEALRAIN S1 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9401AA - IDEALRAIN S3 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B9403AA - IDEALRAIN M3 H/SPRAY 3F CHROME 100MM - ½” BSP (M) B9304AA -ARMAGLIDE 2 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9305AA - ARMAGLIDE 2 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B1039AA-Borbera M1 Rainshower - 1/2" BSP (F)

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 to DN400 flanged inlet and outlet

Marking:

Pegler (brand of Aalberts) size and pressure on data plate on body. Size, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

V912 Ductile Iron Y Type Strainer DN50-400

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The 1BCB001 & 1BCB701 models incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap(s).

WRAS Approval Number:

2201061

Size:

½” BSP (M).

Marking:

1BCA001: BS1010-2, IDC ‘E’ Logo and size on body. 1BCB001: BS1010, BS6282, IDC ‘E’ logo, CR and size on body. 1BCB701: BS1010, BS6282, IDC ‘E’ logo and size on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

Brass body: 1BCA001, 1BCB701. DZR brass body: 1BCB001.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company

Deck mounted laboratory tap, grey powder coated brass body, with three outlets: two are fixed, one is a swivel spout. Each outlet has its own individual quarter turn ceramic disc headwork controlling the flow with a dome type operating member, and a hose union attachment. The product is supplied with a brass backnut. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:

1795 Taps

Section Subtitle:

Laboratory tap(s).

WRAS Approval Number:

2207800

Size:

½” BSP (M)

Marking:

Keen logo (TOF) on operating member

Installation Requirements:

R001 R090

Expiry date:

31/07/2027

Model:

KA1

Approval Holder:

Zhejiang Keen Experimental Equipment Co., Ltd.

Company Name

Zhejiang Keen Experimental Equipment Co., Ltd.

Address

No.8888, Jinxing Village Qixing Street Xinchang County Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Keen Experimental Equipment Co., Ltd.

Company Name

Zhejiang Keen Experimental Equipment Co., Ltd.

Address

No.8888, Jinxing Village Qixing Street Xinchang County Zhejiang Province

Country

China

View All Listings by this Company