Taps

Section Code 1795 : Laboratory.

Back To Directory Sections

WRAS Approval Number: 1612804

Range of wall and deck mounted, fixed or swivel laboratory taps and mixers (powder coated brass) incorporating ceramic disc headworks, non-rising spindle headworks or ceramic cartridge headworks, with lever or dome operating members. The spout outlets incorporate an aerator, a hose union connection, or a DC pipe interrupter with hose union connection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1612804
  • Expiry date: 31/12/2021
  • Note: (i) IRN 040 applies to the wall mounted taps, and when the hose union connection is installed. (ii) IRN 090 applies to taps with hose union connection only. (iii) Where the DC pipe interrupter is used, it must be installed so that the lowest point of the air aperture is not less than 150mm above the spillover level of the receiving receptacle, and have no valve, flow restrictor or tap on its outlet. IRN R040 does not apply.
  • Size: Broen braided hoses DN10 or Broen Compression Fittings 8mm-15mm for copper and stainless steel
  • Marking: Broen on operating member
  • Installation Requirements R001 R006 R010 R040 R090
  • Model
    2534 XXX 82 XX - XX X 2536 XXX 82 XX - XX X 2510 XXX 82 XX - XX X 2511 XXX 82 XX - XX X 2533 XXX 82 XX - XX X Models added May 2017: 6034 XXX 82 XX – XX X 6036 XXX 82 XX – XX X 6033 XXX 82 XX – XX X 6010 XXX 82 XX – XX X 6011 XXX 82 XX – XX X
  • Manufacturer: Broen-Lab A/S
    Company Name
    Broen-Lab A/S
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612010

Range of deck mounted laboratory taps (grey powder coated brass), incorporating either non-rising spindle headworks or half turn ceramic disc headworks with dome type operating members. The 11080.2MDS and 11081.GMDS models have a swivel spout, all other models are fixed. The spout outlets incorporate a plastic flow regulator. The products are supplied with an optional single check valve cartridge (suitable for backflow protection against fluid category 2) for insertion into the spout outlet(s) and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1612010
  • Expiry date: 31/12/2021
  • Note: R009 applies to model 11081.GMDS with the PEX lined hoses only.
  • Size: Model 1081.GMDS: stainless steel braided PEX or EPDM lined hose assemblies with 3/8” captive nut end connections. All other models: ½” BSP male.
  • Marking: FAR logo and WPC on indice.
  • Installation Requirements R001 R006 R009 R090
  • Model
    11012.2MDS, 11062.2MDS, 11066.2MDS, 11068.2MDS, 11080.2MDS, 11080.2MDSR & 11081.GMDS.
  • Manufacturer: Nuova FAR s.r.l.
    Company Name
    Nuova FAR s.r.l.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612011

Range of wall mounted laboratory taps (grey powder coated brass), incorporating either non-rising spindle headworks or half turn ceramic disc headworks with dome type operating members. The 11036.2MDS model has a swivel spout, all other models are fixed. The spout outlets incorporate a plastic flow regulator. The products are supplied with an optional single check valve cartridge (suitable for backflow protection against fluid category 2) for insertion into the spout outlet(s) and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1612011
  • Expiry date: 31/12/2021
  • Note: R009 applies to the PEX lined hoses only.
  • Size: Model 11300.MDSF: stainless steel braided PEX or EPDM lined hose assemblies with 3/8” captive nut end connections. All other models ½” BSP male
  • Marking: FAR & logo on indice
  • Installation Requirements R001 R009 R090
  • Model
    11010.2MDS, 11011.2MDS, 11014.2MDS, 11023.2MDS, 11036.2MDS & 11300MDSF
  • Manufacturer: Nuova FAR s.r.l.
    Company Name
    Nuova FAR s.r.l.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1612353

Range of wall and deck mounted, fixed or swivel laboratory taps and mixers (powder coated brass) incorporating ceramic disc headworks, non-rising spindle headworks or ceramic cartridge headworks, with lever or dome operating members. The spout outlets incorporate an aerator, a hose union connection, or a DC pipe interrupter with hose union connection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1612353
  • Expiry date: 31/12/2021
  • Note: (i) IRN 040 applies to the wall mounted taps, and when the hose union connection is installed. (ii) IRN 090 applies to taps with hose union connection only. (iii) Where the DC pipe interrupter is used, it must be installed so that the lowest point of the air aperture is not less than 150mm above the spillover level of the receiving receptacle, and have no valve, flow restrictor or tap on its outlet. IRN R040 does not apply.
  • Size: Broen braided hoses DN10 or Broen Compression Fittings 8mm-15mm for copper and stainless steel
  • Marking: Brownall, WRAS, WPC & Labtap on operating member
  • Installation Requirements R001 R006 R010 R040 R090
  • Model
    XL3XXXX 82XX-XXX, XL3XXXX 82XX-XXX, XL1XXXX 82XX-XXX, XL1XXXX 82XX-XXX & XL3XXXX 82XX-XXX
  • Factor: Brownall Labtap
    Company Name
    Brownall Labtap
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1706330

Deck mounted laboratory tap, grey powder coated brass body, with three outlets: two are fixed, one is a swivel spout. Each outlet has its own individual ¼ turn ceramic disc headwork controlling the flow with a dome type operating member, and a hose union attachment. The product is supplied with a brass backnut. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1706330
  • Expiry date: 30/06/2022
  • Size: ½” BSP (M)
  • Marking: KA1 & Shaoxing Keen Lab Equipments Co.,Ltd. logo on body
  • Installation Requirements R001 R090
  • Model
    KA1
  • Manufacturer: Shaoxing Keen Lab Equipments Co.,Ltd.
    Company Name
    Shaoxing Keen Lab Equipments Co.,Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707023

Range of deck mounted, single hole, single outlet (fixed or swivel) laboratory taps with brass bodies, incorporating rising spindle headworks with either dome type or single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1707023
  • Expiry date: 31/07/2022
  • Size: ½” BSP (M)
  • Marking: WaterSaver on operating member
  • Installation Requirements R001 R006
  • Model
    Fixed Spout Models: BT611-55 & BT621. Swivel Spout Models: BT614-55.
  • Factor: WaterSaver Labtaps Limited
    Company Name
    WaterSaver Labtaps Limited
    View All Listings by this Company
  • Manufacturer: WaterSaver Faucet Co.
    Company Name
    WaterSaver Faucet Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707024

Range of wall mounted, two hole, single outlet (swivel) laboratory taps with brass bodies, incorporating rising spindle headworks with either dome type or single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Print This Approval


WRAS Approval Number: 1707025

Range of wall mounted, two hole (BT1714WSA & BT1714BH-WSA models) or single hole (BT3100-232SWSA model) laboratory taps with brass bodies, incorporating rising spindle headworks with either dome type or single lever operating members. The BT1714WSA & BT1714BH-WSA models have a swivel spout with a hose union connection, the BT3100-232SWSA model has two fixed hose union connections attached to the main body. The product is supplied with a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1707025
  • Expiry date: 31/07/2022
  • Size: ½” BSP (M)
  • Marking: WaterSaver on operating member
  • Installation Requirements R001 R090
  • Model
    Swivel spout: BT1714WSA & BT1714BH-WSA Fixed spout: BT3100-232SWSA
  • Factor: WaterSaver Labtaps Limited
    Company Name
    WaterSaver Labtaps Limited
    View All Listings by this Company
  • Manufacturer: WaterSaver Faucet Co.
    Company Name
    WaterSaver Faucet Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707026

Range of deck mounted, two hole (BT1614BH-WSA & BT1614WSA models) or single hole (all other models) laboratory taps (fixed or swivel) with brass bodies, incorporating rising spindle headworks with either dome type or single lever operating members. All spout outlets incorporates a hose union connection. The product is supplied with a metal backnut. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1707026
  • Expiry date: 31/07/2022
  • Size: ½” BSP (M)
  • Marking: WaterSaver on operating member
  • Installation Requirements R001 R090
  • Model
    Swivel spout models: BT385RS-WSA (also incorporates 2 fixed spouts), BT414, BT414-BH, BT614, BT614BH, BT1614BH-WSA & BT1614WSA. Fixed spout models: BT380WSA, BT381WSA, BT382WSA, BT611 & BT611BH.
  • Factor: WaterSaver Labtaps Limited
    Company Name
    WaterSaver Labtaps Limited
    View All Listings by this Company
  • Manufacturer: WaterSaver Faucet Co.
    Company Name
    WaterSaver Faucet Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707099

Range of deck mounted, two hole (T1614-55WSA & BT1624WSA models) or single hole (BT414-55 & BT424 models), single outlet (swivel) laboratory taps with brass bodies, incorporating rising spindle headworks with either dome type or single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut. Maximum working pressure: 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1707099
  • Expiry date: 31/07/2022
  • Size: ½” BSP (M) or 10mm copper inlet tails (BT414-55 & BT424 models)
  • Marking: Water Saver on operating member
  • Installation Requirements R001 R006 R010
  • Model
    B1614-55WSA, BT1624WSA, BT414-55 & BT424.
  • Factor: WaterSaver Labtaps Limited
    Company Name
    WaterSaver Labtaps Limited
    View All Listings by this Company
  • Manufacturer: WaterSaver Faucet Co.
    Company Name
    WaterSaver Faucet Co.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710027

Range of deck mounted, single hole, fixed or swivel (depending on model) laboratory taps, with a brass body and non-rising spindle headwork(s) with dome type operating member(s). The spout outlet incorporates a hose union connection. The product is supplied with a metal backnut(s). Maximum working pressure 6.8 Bar. Maximum operating temperature 40°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1710027
  • Expiry date: 31/10/2022
  • Size: ½” BSP (M)
  • Marking: Arboles logo on label on tap body. Arboles on operating member. AB stamped on headworks.
  • Installation Requirements R001 R090
  • Model
    900103 (Fixed - one outlet), 900120 (Fixed - one outlet), 900106 (Swivel - one outlet), 901124 (Fixed - two outlets).
  • Factor: Arboles UK Ltd.
    Company Name
    Arboles UK Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710028

Two hole deck mounted, single outlet, swivel laboratory tap, with a brass body and non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 6.8 Bar. Maximum operating temperature 40°C.

  • Section: 1795 Taps
  • Section Subtitle: Laboratory.
  • WRAS Approval Number: 1710028
  • Expiry date: 31/10/2022
  • Size: ½” BSP (M).
  • Marking: Arboles logo on label on tap body. Arboles on operating member. AB stamped on headworks.
  • Installation Requirements R001 R006 R010
  • Model
    900078.
  • Factor: Arboles UK Ltd.
    Company Name
    Arboles UK Ltd.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of