Excelsior Range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C
Range of unvented heat pump storage cylinders which consist of an air-source heat pump sitting on top of the tank with either no internal coil (model numbers ending without S) or a factory fitted single internal coil (model numbers ending with S). The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C and an stainless steel immersion heater and titanium alloy anode. The product is not supplied with an inlet control group (safety kit). Maximum operating temperature 70°C. Maximum working pressure (primary & secondary circuit) 5.5 bar.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 71 681 xx0 | Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish | G 1/2 (offset) | 10 bar | 70 °C | hansgrohe | on the handle | Yes | Ceramic cartridge | Not Applicable |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 86005640 | Chrome | 15mm compression joint | 10 bar | 80 °C | TRITON,86005640 | Handle/ body | No | Ceramic cartridge |
Wall mounted, concealed shower valve (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to shower outlets with a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wall mounted, manually operated, concealed shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.
Range of manually operated, concealed blending valves with brass body (various finishes) and ceramic cartridge headwork and single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a ceramic disc diverter (models SD4373-2S) with various operating members. A quarter turn ceramic disc headwork (models SH40001-2, SD4373S) or 2 quarter turn ceramic disc headworks (model SH40001). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate backflow protection. Models SH40001-2, SH40001 incorporate stainless steel strainers. Supplied with a shower hose, shower handset, riser rail & overhead shower outlet (models SD4373-2S, SH40001). SD4373S incorporates a shower hose, shower handset & riser rail. SH40001-2 incorporates an overhead shower outlet Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C. Model SH40001 Maximum operating temperature 60°C
Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Combined temperature and pressure relief valves with a DZR brass body, pre-set at 7.0, 10.0 or 15.0 bar. Maximum working pressure See models Maximum operating temperature 90.0°C
Page 14 of 30
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
