Range of gate valves with bronze bodies and rising or non-rising spindles (see model). The 131DR, 132DR, 133DR, 134DR and 137DR models are handwheel operated. The 131LS-DR, 135DR, 136DR and 137LS-DR models have a lockshield operating member. Maximum working pressures: 134DR and 135DR models: 16.0 bar, 132DR, 133DR, 136DR, 137DR and 137LS-DR models: 20.0 bar, 131DR and 131LS-DR models: 25.0 bar. Maximum operating temperature 85°C.
Range of balancing valves with blue epoxy coated ductile iron bodies incorporating blue epoxy coated ductile iron (DN50~DN150) or stainless steel discs (DN200~DN300), EPDM gaskets and ‘O’-rings, handwheel operating member and a measuring port at each flanged end. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 8.6 bar. Cold water use only.
'Coating F8'. Factory applied, grey coloured DLC coating. Apply as per Work Instructions dated 4. Feb 2026. No cure required. For use with water up to 85°C.
'IF1947T'. Factory applied, red coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's Instructions for Use 'Doc. No. SPPR/L3/WI/PRD/28.' Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Eco Coat FBE Red RAL 3013' (red coloured) & 'Eco Coat FBE Blue RAL 5017' (blue coloured). Factory applied Epoxy coatings. Apply as per manufacturer's Instructions for Use 'Doc. No.:SPPR/L3/WI/PRD/28A'. Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
‘BOR Plus Faser Composite Stabil Pipe PP-R (SDR 6 & SDR 7.4)’. Extruded, multi-layered PP-R pipes comprising of a beige coloured inner layer, green coloured middle layer and beige coloured outer layer. ‘BOR Plus Monolayer PP-R Pipes (SDR 6 & SDR 7.4)’. Extruded, beige coloured PP-R pipes. For use with water up to 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHAFPUR/CH | Chrome | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/BN | Brushed Nickle | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/AB | Antique brass | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| SHAFPUR/GD | Gold | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/CH | Chrome | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/BN | Brushed Nickle | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator | |
| AVEPUR/AB | Antique brass | 1/2" BSP | 10bar bar | 60℃ °C | Caple logo | on body | No | 1/4 Turn ceramic disc | C-plate | Aerator |
Range of WC flushing cisterns incorporating a side entry (delayed action) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The float operated valve incorporates a flow restrictor on the inlet. The cistern is operated by an optional manual dual push button and incorporates a servicing valve on the inlet supply. The waste elbow on model BDS-K210-A01-ESG6 is optional. Maximum working pressure 10.0 bar. Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 604587 X XXX | VARIOUS | 3/4” BSP male inlet. | 10 bar | 65 °C | TP | Back of the mixer tap body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | Shower Hose, Handset, |
X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1
Page 129 of 138
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
