Range of brass compression fittings incorporating brass ring olive to be used with pipe manufactured to EN ISO 15875. Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:

1120 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107003

Size:

see models.

Marking:

Comap and size on fitting nut.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

9400324X: 9400 Adaptor PEX Compression M 16x2,2mm-1/2”, 9401032X: 9401 Straight coupling PEX Compression 16x2,2mm, 9402324X: 9402 Adaptor PEX Compression F 16x2,2mm-1/2”, 9403032: 9403 Equal Elbow PEX Compression 90° 16x2,2mm-1/2”, 9404324: Male Elbow PEX Compression 90° 16x2,2mm-1/2”, 9405324: Female Elbow PEX Compression 90° 16x2,2-1/2", 9407032X: 9407 Equal Tee PEX Compression 16x2,2mm, 984050 9840 Blue box with brass elbow mono-bloc Pex FM 1/2”- 16x2,2mm, 984060: 9840 Red box with brass elbow mono-bloc Pex FM 1/2”- 16x2,2mm, 9400514X: 9400 Adaptor PEX Compression M 20x2mm-1/2”, 9400516: 9400 Adaptor PEX Compression M 20x2mm-3/4”, 9401051X: 9401 Straight coupling PEX Compression 20x2mm, 9402514X: 9402 Adaptor PEX Compression F 20x2mm-1/2”, 9403051: 9403 Equal elbow 20x2mm-1/2”, 9404514: 9403 Male Elbow PEX Compression 90° 20x2-1/2 9407051X: 9407 Equal Tee PEX Compression 20x2mm-1/2”, 984070: 9840 Blue box with brass elbow mono-bloc Pex FM 1/2”- 20x2,2mm 984080 9840 Red box with brass elbow mono-bloc Pex FM 1/2”- 20x2,2mm. E211170001 Female End caps 3/4" BSP (F), E211160001 Male End caps 3/4" BSP (M).

Approval Holder:

Comap

Company Name

Comap

Address

77 boulevard Stalingrad 69100 VILLEURBANNE

Country

France

View All Listings by this Company

The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206349

Size:

see model

Marking:

Philmac and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")

Approval Holder:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Manufacturer:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206027

Size:

Please refer to model.

Marking:

Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of copper and DZR brass press fit tap connectors for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206045

Size:

½” press fit x ½” BSP captive nut. ¾” press fit x ¾” BSP captive nut.

Marking:

>B< (manufacturer’s logo), DR & size on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

PIR5002G – Bent Tap Connector PIR5002G040400 & PIR5002G060600. PIR5240G – Straight Tap Connector PIR5240G040400 & PIR5240G060600.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of ductile iron pipe couplings for use with stainless steel and carbon steel pipe. The carbon steel pipe must incorporate a suitable coating or lining for wholesome water use. For maximum working pressure and the type of pipe the fittings are for use with, please refer to model. For above and below ground use. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206015

Size:

Please refer to model.

Marking:

Victaulic size, model and product info on clamp

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Style W07, AGS Rigid Coupling for use with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W77, AGS Flexible Coupling for with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 9.5mm carbon steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with Sch10S stainless steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with 3mm stainless steel pipe: DN350 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 4mm stainless steel pipe: DN350 - maximum working pressure 20.68 bar.

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). The HLE20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211802

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLE11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLE11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLE11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLE20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLE20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLE20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLE20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLE30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208804

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLE11ECC-a Elbow 90 degree C X C: 8mm-108mm. HLE11ECC-b Street Elbow 90 degree Ftg X C: 8mm-108mm. HLE11ECC-c Street Elbow 45 degree Ftg X C: 8mm-108mm. HLE11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-e Elbow 45 degree C X C: 8mm-108mm. HLE11ECC-f Elbow 45 degree Long Turn C X C: 8mm-108mm. HLE11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-h Elbow 90 degree Long Turn C X C: 8mm-108mm. HLBGQW Partial Crossover Ftg x C: 12mm-28mm. HLE20CC-a Straight Coupling with dot C X C: 8mm-108mm. HLE20CC-b Slip Straight Coupling C X C: 8mm-108mm. HLE20CC-c Straight Coupling with groove C X C: 8mm-108mm. HLE21RCC-a Fitting Reducer Ftg X C: 8mm-108mm. HLE21RCC-b Reducing Coupler C X C: 8mm-108mm and ½” - 1”. HLE30TCC-a Equal TEE CxCxC: 8mm-108mm. HLE30TCC-b DWV Equal TEE CxCxC: 12mm-54mm. HLE31TRC Reducing Tee CxCxC: 8mm-108mm. HLE40CAP Cap: 8mm-108mm. HLGQW Full Crossover C x C: 12mm-28mm. HLNSZJ Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). HLUXW Return Bend Stop: 15mm-54mm. HLWSZJ Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). HLYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper or gunmetal solder fittings for use with copper pipe. Maximum working pressure 16.0 bar (Sizes 8 - 28mm). Maximum working pressure 10.0 bar (Sizes 35 - 108mm). Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207803

Size:

8mm to 108mm

Marking:

Viega on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Copper models: 95002A - elbow 90°, 95001A - elbow 90°, 95041 - elbow 45°, 95040 - elbow 45°, 95090 - elbow 90°, 95092 - elbow 90°, 95103 - T-piece, 95085 - crossover, 95086 - crossover, 95270 - coupling, 95240 - reducing coupling, 95243 - reducing, 95301 - cap. Gunmetal models: 94130G - T-piece, 94243G - adapter, 94472G - Wall plate, 94090G - adapter elbow 90°, 94280G - adapter, 94270G - adapter, 94246G - plug-in piece, 94092G - adapter elbow 90°, 94340 - screw fitting, 94471G - wall plate elbow, 94096G - adapter union elbow 90°, 94340G - adapter union.

Approval Holder:

Viega GmbH & Co. KG

Company Name

Viega GmbH & Co. KG

Address

Viega Platz 1 Attendorn

Postcode

57439

Country

Germany

Phone

+49 (2722) 61-5280

General Email

andre.quartier@viega.de

View All Listings by this Company

Range of heat exchangers connected to copper waste pipe, Where the waste is discharged down a “rotator” into a copper waste pipe, and potable water is returned to the shower/heating device via a copper double walled jacket around the copper waste pipe. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:

1350 Heat Exchangers

Size:

½” BSP (F)

Marking:

Manufacturer ( Builidng Product Distribution) Manufacturer address Type Category BPD Ltd Serial No. Model & other information on Adhesive label.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Showersave: QB1-21C QB1-16C QB1-12C QB1-21 Cyclone QB1-21 QB1-16 QB1-12 QB1-21D QB1-21D HE Models added June 2024 - maximum working pressure of 10.0 bar. QBI-21XE QBI-10XE

Approval Holder:

BPD Limited

Company Name

BPD Limited

Address

View All Listings by this Company

Range of cross and parallel flow water plate heat exchangers with stainless steel bodies. Maximum working pressure primary circuit: 3.0 bar, secondary circuit: 10.0 bar. Maximum operating temperature 80°C.

Section:

1350 Heat Exchangers

Size:

15.7mm ID

Marking:

CONDEVO SpA, model and date of manufacture (DD/MM/YY) on label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Type “W” range of cross and parallel flow heat exchangers, model code is as follows: PP aaFWywRxx. Where: aa = number of plates (from 10 to 34 plates). F = parallel flow. W = identifies shape of plates. y = type of stainless steel, 4 for AISI304L and 6 for AISI316L w = type of coupling plate R (distance between holes 42mm), Q (only for crossed flow) Rxx = coupling plate with xx replaced with numbers denoting distance between holes.

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Manufacturer:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company