Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

251004716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

6.35mm pushfit.

Marking:

Wodar on front cover.

Installation Requirements:

R001 R008 R040

Expiry date:

31/10/2030

Model:

S2-H010, BN-H0110, S2-H030, S2-H070, S2-H110.

Approval Holder:

Wodar Ltd

Company Name

Wodar Ltd

Address

11C Stephenson Road Clacton on Sea Essex

Postcode

CO15 4XA

Country

United Kingdom

Phone

07894 606234

General Email

michael@wodar.com

View All Listings by this Company

Range of water meter manifolds with plastic bodies, for use with MDPE pipe to BS EN 12201 pipe (for the push-fit models). The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Maximum operating pressure 12.5 bar. Maximum operating temperature 23°C

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

25mm (push-fit), 32mm (push-fit), ¾” BSP.

Marking:

Ebco and flow arrow.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

MB10112525BM, MB10113232AM, MB10220303BM.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of DZR brass metering stations supplied with red and blue test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 2” BSP, BSPP or NPT (FxM).

Marking:

ALBION, CR, PN, Size “inches” & flow arrow.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ART67 DNXX Where XX can be replaced with: DN15UUL, DN15UL， DN15L， DN15M， DN15, DN20, DN25, DN32, DN40, DN50.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

KLDG-WR Range of electromagnetic flow meters with carbon steel bodies, NBR inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN300 flanged.

Marking:

Kleev USA Inc, product type, model number, DN, series number and other technical information on data plate on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

KLDG-WR

Approval Holder:

Kleev USA INC

Company Name

Kleev USA INC

Address

833 Claude Laurel Drive, APEX NC

Postcode

27523

Country

United States

Phone

00971 529 427777

General Email

infro@kleveusa.com

View All Listings by this Company

Automated Leak detection device with a plastic body and spherical valve. Maximum working pressure 8 bar. Maximum operating temperature 45˚C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251004706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Claims of leak detection have not been verified by test.

Size:

1” x ¾” Union nut.

Marking:

Activ Leak Sense & product info on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ALS01 ACTIV LEAK SENSE

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of threaded fittings with either brass or chrome plated brass bodies. Maximum working pressure 40 Bar Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

UTC Company logo, model and size on body

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

Brass Connector Nipple Socket BCNS15 1/2” x 15mm BCNS20 1/2” x 20mm BCNS50 1/2” x 50mm Brass Connector Nipple Socket with chrome finish BCNS15CP 1/2” x 15mm BCNS20CP 1/2” x 20mm BCNS50CP 1/2” x 50mm Brass Hex Nipple Socket BRHN12 1/2" BRHN100 1" BRHN200 2" Brass Hex Nipple Socket with chrome finish BRHN12CP 1/2" BRHN100CP 1" BRHN200CP 2"

Approval Holder:

Ultimate Trading Co L.L.C.

Company Name

Ultimate Trading Co L.L.C.

Address

PO Box 269776, Shop no 3 Street 130 Naif Road Deira Dubai

Country

United Arab Emirates

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Available in both ¾” BSP (M) or ¾” NPT (M)

Marking:

DAB company logo on pump body

Installation Requirements:

R001 R008 R415

Expiry date:

31/12/2030

Model:

60220687 EsyBox Pop (Pressurisation booster system) 60217710 ESYDOCK POP (Base for an easy assembling of the pump Esybox Pop on the wall, provided with BSP and NPT threaded connections.)

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company