‘HLBRxx’ range of brass or DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The HLBRTC‐1 tank connector, HLBRSS‐1 and HLBRBS‐1 tap connectors all incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 8-54mm, ¼” - 2” BSP (M) or (F).

Marking:

HL and size on nut or body. DZR brass fittings are also marked CR.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

HLBRRC‐1 Reducing Coupling 10mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 8mm, HLBRRC‐1 Reducing Coupling 15mm x 10mm, HLBRRC‐1 Reducing Coupling 15mm x 12mm, HLBRRC‐1 Reducing Coupling 22mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 15mm, HLBRRC‐1 Reducing Coupling 28mm x 22mm, HLBRSS‐1 Straight Swivel Tap Connector 15mm x 1/2", HLBRSS‐1 Straight Swivel Tap Connector 15mm x 3/4", HLBRSS‐1 Straight Swivel Tap Connector 22mm x 3/4", HLBRBS‐1 Bent Swivel Tap Connector 15mm x 1/2", HLBRBS‐1 Bent Swivel Tap Connector 22mm x 3/4", HLBRTC‐1 Tank Connector 15mm, HLBRTC‐1 Tank Connector 22mm, HLBRTC‐1 Tank Connector 28mm, HLBRTC‐1 Tank Connector 35mm, HLBRER‐1 Elbow Reducer 22mm x 15mm, HLBRFB‐1 Female Backplate Elbow 15mm x 1/2" female, HLBRFB‐1 Female Backplate Elbow 22mm x 3/4" female, HLBRCN‐1 Compression Nut 15mm, HLBRCN‐1 Compression Nut 22mm, HLBRCN‐1 Compression Nut 28mm, HLBRCC‐1 Compression Cap / Blank Nut 1/2", HLBRCB‐1 Compression Blank Capnut 22mm, HLBRRT‐1 Reducing Tee 15mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 15mm x 22mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 15mm, HLBRRT‐1 Reducing Tee 22mm x 22mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 15mm, HLBRRT‐1 Reducing Tee 28mm x 15mm x 28mm, HLBRRT‐1 Reducing Tee 28mm x 28mm x 22mm, HLBRFB‐2 Female Branch Tee 15mm x 15mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 1/2", HLBRFB‐2 Female Branch Tee 22mm x 22mm x 3/4", HLBRFB‐2 Female Branch Tee 28mm x 28mm x 1/2", HLBRFE‐2 Female End Tee 15mm x 1/2" x 15mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 8mm, HLBRRS‐1 Reducing Set (3 part) 15mm x 10mm, HLBRRS‐1 Reducing Set (3 part) 22mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 15mm, HLBRRS‐1 Reducing Set (3 part) 28mm x 22mm, HLBRRS‐1 Reducing Set (3 part) 35mm x 22mm, HLBRTA‐1 Tap Adaptor Male x Female 1/2", HLBRBR‐1 Burst Repair Coupling 15mm x 15mm x 80mm, HLBRSC‐1 Straight Coupling 8mm, HLBRSC‐1 Straight Coupling 10mm, HLBRSC‐1 Straight Coupling 15mm, HLBRSC‐1 Straight Coupling 22mm, HLBRSC‐1 Straight Coupling 28mm, HLBRSC‐1 Straight Coupling 35mm, HLBRSC‐1 Straight Coupling 42mm, HLBRSC‐1 Straight Coupling 54mm, HLBRMC‐1 Male Coupling 8mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/4" male, HLBRMC‐1 Male Coupling 10mm x 1/2" male, HLBRMC‐1 Male Coupling 10mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/4" male, HLBRMC‐1 Male Coupling 15mm x 3/8" male, HLBRMC‐1 Male Coupling 15mm x 1/2" male, HLBRMC‐1 Male Coupling 15mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1/2" male, HLBRMC‐1 Male Coupling 22mm x 3/4" male, HLBRMC‐1 Male Coupling 22mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1" male, HLBRMC‐1 Male Coupling 28mm x 1.1/4" male, HLBRMC‐1 Male Coupling 35mm x 1.1/4" male, HLBRMC‐1 Male Coupling 42mm x 1. 1/2" male, HLBRMC‐1 Male Coupling 54mm x 2" male, HLBRFC‐1 Female Coupling 8mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 1/4" female, HLBRFC‐1 Female Coupling 10mm x 3/8" female, HLBRFC‐1 Female Coupling 10mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 1/2" female, HLBRFC‐1 Female Coupling 15mm x 3/8" female, HLBRFC‐1 Female Coupling 15mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1/2" female, HLBRFC‐1 Female Coupling 22mm x 3/4" female, HLBRFC‐1 Female Coupling 22mm x 1" female, HLBRFC‐1 Female Coupling 28mm x 1" female , HLBRFC‐1 Female Coupling 35mm x 1.1/4" female, HLBRFC‐1 Female Coupling 42mm x 1.1/2" female, HLBRFC‐1 Female Coupling 54mm x 2" female, HLBRSE‐1 Stop End 8mm, HLBRSE‐1 Stop End 10mm, HLBRSE‐1 Stop End 15mm, HLBRSE‐1 Stop End 22mm, HLBRSE‐1 Stop End 28mm, HLBRSE‐1 Stop End 35mm, HLBRSE‐1 Stop End 42mm, HLBRSE‐1 Stop End 54mm, HLBRIR‐1 Internal Reducer 15mm x 8mm, HLBRIR‐1 Internal Reducer 10mm x 8mm, HLBRIR‐1 Internal Reducer 15mm x 10mm, HLBRIR‐1 Internal Reducer 22mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 15mm, HLBRIR‐1 Internal Reducer 28mm x 22mm, HLBRE‐1 Elbow 8mm, HLBRE‐1 Elbow 10mm, HLBRE‐1 Elbow 15mm, HLBRE‐1 Elbow 22mm, HLBRE‐1 Elbow 28mm, HLBRE‐1 Elbow 35mm, HLBRE‐1 Elbow 42mm, HLBRME‐1 Male Elbow 15mm x 1/2" male, HLBRME‐1 Male Elbow 15mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 3/4" male, HLBRME‐1 Male Elbow 22mm x 1" male, HLBRME‐1 Male Elbow 28mm x 1" male, HLBRFE‐1 Female Elbow 15mm x 1/2" female, HLBRFE‐1 Female Elbow 15mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 3/4" female, HLBRFE‐1 Female Elbow 22mm x 1" female, HLBRFE‐1 Female Elbow 28mm x 1" female, HLBRET‐1 Equal Tee 8mm, HLBRET‐1 Equal Tee 10mm, HLBRET‐1 Equal Tee 15mm, HLBRET‐1 Equal Tee 22mm, HLBRET‐1 Equal Tee 28mm, HLBRET‐1 Equal Tee 35mm, HLBRET‐1 Equal Tee 42mm, HLBRET‐1 Equal Tee 54mm.

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

‘3600xx’ range of brass compression fittings for use with copper pipe (manufactured to EN 1057). The 360014 tank connector, 360013 and 360017 tap connectors all incorporate an EPDM washer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250915009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model: 6-54mm, ¼” - 2” BSP (M) or (F).

Marking:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on compression nut.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

360003 Compression Straight Connector: 6mm - 54mm, 360004 Compression Reducing Coupler: 10mmx8mm - 28mmx22mm, 360001 Compression Male Coupler: 6mmx1/4" - 54mmx2", 360002 Compression Female Coupler: 6mmx1/4" - 54mmx2", 360013 Compression Straight Tap Connector: 15mmx1/2"- 22mmx3/4", 360014 Compression Tank Connector with Seal: 15mm - 54mm 360015 Compression End Cap Connector: 6mm - 54mm, 360007 Compression Elbow Coupler: 8mm - 54mm, 360016 Compression Elbow Reducing Connector: 22mmx15mm, 360017 Compression Bent Tap Connector: 15mmx1/2"- 22mmx3/4", 360006 Compression Female Elbow Connector: 8mmx1/4" - 54mmx2", 360009 Compression Wall Plate Elbow Coupler: 15mmx1/2" - 22mmx3/4", 360005 Compression Male Elbow Coupler: 8mmx1/4" - 54mmx2", 360008 Compression Equal Tee Coupler: 8mm - 54mm, 360018 Compression Reducing Tee Coupler: 15mmx15mmx22mm - 28mmx28mmx22mm, 360010 Compression Female Tee Coupler: 15mmx15mmx1/2" - 28mmx28mmx1/2".

Product Images

Approval Holder:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

Manufacturer:

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name

TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Address

No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610

Country

China

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Product Images

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and EPDM O-rings. The inlets incorporate a double check valve assembly, verified by test - suitable for backflow protection against Fluid Category 3. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Huizhong logo, Model No, DN, CR and product info on face. CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

SCL-61H-100 DN25: ¾” BSP (M) DN40: ¾” BSP (M)

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Range of in-line water meters incorporating bronze copper alloy bodies and EPDM O rings. Maximum working pressure 10.0 Bar Maximum operating temperature 30.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

EMS, Model and other technical data on water meter dial

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

TH15 – DN 15 CNPA 49 Male Pipe Thread (25.8mm) TH20 – DN 20 CNPA 49 Male Pipe Thread (33mm) TH25 – DN 25 CNPA 49 Male Pipe Thread (39mm)

Approval Holder:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Manufacturer:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Range of shock arrestors with a stainless-steel body and EPDM liner. The compression connection of the X2041.015 model is for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

X2041.015: 15mm compression, X2040.G15: ½” BSP (M).

Marking:

Zhejiang Fansheng Fluid Control Co., Ltd logo on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

X2041.015, X2040.G15.

Approval Holder:

Zhejiang Fansheng Fluid Control Co., Ltd.

Company Name

Zhejiang Fansheng Fluid Control Co., Ltd.

Postcode

317605

Country

China

Phone

+86 576 8746 0061

General Email

info@IVANCI.com

View All Listings by this Company

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

WHA-G12M-LL: ½” BSP (M), WHA-G34M-LL: ¾” BSP (M), WHA-G1M-LL: 1” BSP (M), WHA-AM-LL: ½” NPT (M), WHA-BM-LL: ¾” NPT (M), WHA-CM-LL: 1” NPT (M).

Marking:

Yongtong logo, Yongtong, part # (model), size (A, B or C), water hammer arrestor, WRAS and made in China on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

WHA-G12M-LL: 1/2” G Male Water Hammer Arrester, A, WHA-G34M-LL: 3/4” G Male Water Hammer Arrester, B, WHA-G1M-LL: 1” G Male Water Hammer Arrester, C, WHA-AM-LL: 1/2” MIP Water Hammer Arrester, A, WHA-BM-LL: 3/4” MIP Water Hammer Arrester, B, WHA-CM-LL: 1” MIP Water Hammer Arrester, C.

Approval Holder:

Taizhou Yongtong Brass Industry Co., Ltd.

Company Name

Taizhou Yongtong Brass Industry Co., Ltd.

Address

50 Keyuanbei Road, Qinggang, Yuhuan, Zhejiang

Country

China

Phone

+86 0576-87105707

General Email

j.luo@yongtongbrass.com

View All Listings by this Company

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

AXCU-A: ½” NPT (M), AXCU-B: ¾” NPT (M), AXCU-C: 1” NPT (M).

Marking:

Aquanox logo, pipe size, model number, pressure and temperature on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AXCU-A AXCU-B AXCU-C

Approval Holder:

Hydro Point Building Material Trading LLC

Company Name

Hydro Point Building Material Trading LLC

Address

Kasco Tower Al Qiasis Industrial Area 3 Dubai

Country

United Arab Emirates

Phone

0097 1422 18499

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of EPDM expansion joints with flanged end conenctors. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD logo (‘MR-FLEX’) and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

S-100: DN32 - DN300, S-101: DN25 - DN300, S-115: DN25 - DN300.

Product Images

Approval Holder:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Manufacturer:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Manufacturer:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250902720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN25 - DN200 flanged.

Marking:

Dooch, model, serial number and technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2030

Proviso:

The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Model:

XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name

SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Address

No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company

Manufacturer:

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name

ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Address

NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250808004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Hansgrohe on the body.

Installation Requirements:

R001 R040

Expiry date:

31/08/2030

Model:

26 469 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with ceiling connector. 26 470 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm. 26 469 400 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Pull Out Twist Mini and Pull Out Twist range of PET (Polyethylene terephthalate) braided flexible hoses incorporating HDPE liner and EPDM ‘O’-rings, various brass or stainless steel fitting bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250804009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

external thread M12x1, external thread M10x1, external thread M8x1, external threadM14x1, external thread G3/8", (Liso) pipe end 8mm, (Liso) pipe end 10mm, captive nut G3/8", captive nut M11x1, Clip 10, Clip 15, Clip 11, external thread M15x1 with o-ring captive nut 1/2 ET, captive nut 1/2 UJ, captive nut 3/8 UJ, captive nut G1/2 conical, Clip 14, external thread M16x1, external thread M22x1, 1/2-18UNS, 11/16-16 UNS, external thread M18x1.5, Captive nut G1/2", external thread M15x1.

Marking:

TUCAI and product information on ferrule. NT or TB/XX/WRAS/DNYY. NT or TB denotes site of manufacture. year of manufacture (YY), WRAS, DNYY denotes bore diameter and is replaced with DN7 or DN8.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Pull Out Twist Mini: DN7 Pull Out Twist: DN8

Approval Holder:

Tucai, S.A.

Company Name

Tucai, S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd.

Address

No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450

Country

China

General Email

View All Listings by this Company

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106064

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

Intatec logo on conical nut.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

IX100005CP - 1.5M BRAIDED IX100004CP - 1.5M SMOOTH 30003CPX - 1.5M BRAIDED IX100006CP - 2M BRAIDED 30006CPX - 2M BRAIDED

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of nylon braided flexible outlet hoses, incorporating an EPDM liner, EPDM ‘O’-rings and gaskets. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250715010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

End connections: 01 & 03: ½” BSP (F) captive nut. 02 & 04: ⅜” BSP (F) captive nut. 05: M15x1. 06: hose 11.2mm quick plug + loose quick connect to M15x1. 07: F15x1 captive nut.

Marking:

All connections: Kind, WRAS and date of manufacture (YYYYMM) on sleeve or ferrule. Connections 01 & 03: Also have Kind on captive nut.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

JD-PN***-**-**** Where: *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. ** denotes the hose size: 06 = DN6, 07 = DN7. **** denotes the connections, and can be replaced with any of the following: 01 = F1/2, 02 = F3/8, 03 = Cardan F1/2, 04 = Cardan F3/8, 05 = M15*1, 06 = 11.2mm Quick plug + loose quick connect to M15x1, 07 = F15*1. E.g. JD-PN100-06-0105.

Product Images

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Country

China

General Email

sale@watersino.com

View All Listings by this Company

Range of EVOX stainless steel or grey nylon braided polyethylene lined flexible hose assemblies incorporating EPDM ‘O’-rings with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250904002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

MALE 8X1 MALE 10X1 F ½ WITH GASKET F 3/8 WITH GASKET

Marking:

MRG DN 6 WRAS, year of manufacture YY

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

EVOX DN6 RANGE

Approval Holder:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

‘KM1001 series’ of stainless steel braided EPDM lined flexible hose assemblies. Compression end connections are for use with copper pipes (manufactured to EN 1057). Compression end connections are also available with brass bodied (nickel plated) isolation valves incorporating a chrome plated brass ball. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250915001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

COMEALE (registered trademark of Taizhou Kemei Plumbing Hose Co., Ltd), WRAS and year of manufacture (YYYY) on ferrules.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

KM1001 series: DN8 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G1/2” BSP (F) elbow, M8x1 and M10x1. DN10 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, M8x1, M10x1, M12x1, 15mm compression and 15mm compression with isolation valve. DN12 bore available with connections: G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, G3/4” BSP (F) elbow, 22mm compression and 22mm compression with isolation valve.

Product Images

Approval Holder:

Taizhou Kemei Plumbing Hose Co., Ltd

Company Name

Taizhou Kemei Plumbing Hose Co., Ltd

Address

120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province

Country

China

General Email

export@tzkemei.com

View All Listings by this Company

Manufacturer:

Taizhou Kemei Plumbing Hose Co., Ltd

Company Name

Taizhou Kemei Plumbing Hose Co., Ltd

Address

120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province

Country

China

General Email

export@tzkemei.com

View All Listings by this Company

Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250912045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SODAO, WRAS and year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Product Images

Approval Holder:

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Address

1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company

Manufacturer:

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Address

No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company