‘Sika AnchorFix®-3030'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B4 of European Technical Assessment ‘ETA 17/0694’, dated ‘09/09/2025’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B4 of European Technical Assessment ‘ETA 17/0694’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.
Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 604587 X XXX | VARIOUS | 3/4” BSP male inlet. | 10 bar | 65 °C | TP | Back of the mixer tap body | No | 1/4 Turn ceramic disk | Metal Backnuts | Flow Straightener | Shower Hose, Handset, |
X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: A – Single lever type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1044-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1034-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1033-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1032-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 1031-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | BODY | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
1.For the series 1044-XX, 1034-XX,1033-XX,1032-XX,1031-XX, the only difference is handle style. 2.XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass, BN=Brushed nickel,GM=Gun Metal.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SHRABSMCH | Chromed | 15mm compression | 10 bar | 65 °C | Lecico | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | Aerator | |
| SHZABSMCH | Chromed | 15mm compression | 10 bar | 65 °C | Lecico | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F2300120012060 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 85 °C | Justlink WRAS 2025 | Nut | No | Open Outlet |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-744* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| SJS-200* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-795* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-300* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-798* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XB-LY-011C | Chrome | ½" x ¾" BSP (M) offset union | 10 bar | 65 °C | XUSHENG | BODY | No | Single sequential | |||
| XB-LY-017C | Chrome | ½" x ¾" BSP (M) offset union | 10 bar | 65 °C | XUSHENG | BODY | No | Single sequential |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F3063S-** | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | LAN BIAO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable | ||
| F3064S-** | Various | 3/4” x ½” BSP (M) offset unions or 15mm compression | 10 bar | 85 °C | LAN BIAO | Rear of body | No | 1/2 Turn ceramic disc | Not Applicable |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S002* | Various | 3/4" BSP (F) inlets and 1/2" BSP (F) outlets | 10 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, |
| S013* | Various | 1/2" BSP (F) | 10 bar | 65 °C | WINSDRUM | On cover plate | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
| S014* | Various | 3/4" BSP (F) inlets and 1/2" BSP (F) outlets | 10 bar | 65 °C | WINSDRUM | On cover plate | No | 1/4 & 1/2 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Model B3306AA & B1148AA are supplied with a lever type operated pop-up waste – not verified by test. Products are supplied with 3/8” x 15mm Compression adaptors for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C), Truffle (TF-C) Baby Pink (BP-C) Misty Grey (MG-C)
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator, and the product is supplied with a permanently open type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C), Truffle (TF-C) Baby Pink (BP-C) Misty Grey (MG-C)
Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C), Truffle (TF-C) Baby Pink (BP-C) Misty Grey (MG-C)
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SAVOY | Chrome | G ½” | 5 bar | 60 °C | CARRON PHOENIX | OPERATING MEMBER | No | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| FUJI | Chrome | G ½” | 5 bar | 60 °C | FRANKE | OPERATING MEMBER | No | Ceramic cartridge | C-plate | Aerator | Flow Regulator Fitted, |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DU SNK FL5.6 C | Chrome | 1/2" BSP | 5 bar | 60 °C | Bristan | Body | No | 1/4 Turn ceramic disk | C-plate | Aerator | Flow Regulator Fitted, |
Wall mounted, two-hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a built in anti-splash device and the product is supplied with metal backnuts. Maximum working pressure; 10Bar Maximum operating temperature 85°C
Two-hole, deck mounted, single outlet (fixed) combination tap assembly, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The product is supplied with metal back nuts, a plastic aerator and stainless steel braided EPDM lined interconnecting hoses. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.
Page 111 of 113
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
