Directory Search Results

Print List

#260302709

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve. Maximum working pressures: 16 bar, 25 bar and 40 bar. Oval flanges - Body type ‘T’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 16 bar. Round flanges - Body type ‘R’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 25 bar. Round flanges - Body type ‘F’ (1SV-3SV) - 25 bar. Round flanges - Body type ‘N’ (10SV) - 25 bar. Round flanges - Body type ‘N’ (66SV-92SV) - 16 bar. Round flanges - Body type ‘G’ (33SV, 46SV) - 40 bar. Round flanges - Body type ‘G’ (33SV, 46SV, 66SV-92SV, 125SV) - 16 bar. Round flanges - Body type ‘G’ (125SV) - 25 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
260302709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.
Marking:
Lowara logo, Xylem, pressure and technical data on data plate on body. Lowara and WRAS on adhesive label on body DN80 46SV_10G_055 Lowara logo, Xylem, pressure and technical data on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2031
Model:
1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.

Approval Holder:
Xylem Service Italia S.r.l
Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

Print This Approval


#260304701

Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
260304701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
PBI-L2 prefix models: 1” BSP (F) x 1” BSP (F), PBI-L4 prefix models: 1¼” BSP (F) x 1” BSP (F), PBI-L8 prefix models: 1½” BSP (F) x 1¼” BSP (F).
Marking:
Wilo, model no., date of manufacture (YYWW) and other technical information on data label on body. Wilo on control box.
Installation Requirements:
R001 R415
Expiry date:
31/03/2031
Model:
PBI-L series pumps: PBI-L203MA/P, PBI-L204MA/P, PBI-L205MA/P, PBI-L402MA/P, PBI-L403MA/P, PBI-L404MA/P, PBI-L405MA/P, PBI-L802MA/P, PBI-L803MA/P, PBI-L203EA/P, PBI-L204EA/P, PBI-L205EA/P, PBI-L402EA/P, PBI-L403EA/P, PBI-L404EA/P, PBI-L405EA/P, PBI-L802EA/P, PBI-L803EA/P, PBI-L203MA/P/S, PBI-L204MA/P/S, PBI-L205MA/P/S, PBI-L402MA/P/S, PBI-L403MA/P/S, PBI-L404MA/P/S, PBI-L405MA/P/S, PBI-L802MA/P/S, PBI-L803MA/P/S, PBI-L203EA/P/S, PBI-L204EA/P/S, PBI-L205EA/P/S, PBI-L402EA/P/S, PBI-L403EA/P/S, PBI-L404EA/P/S, PBI-L405EA/P/S, PBI-L802EA/P/S, PBI-L803EA/P/S. Where: PBI-L = series name (Electronic boosting pump variable speed pump (Inverter Pump)) 2, 4 or 8 = Rated flow capacity in m³/h. 2, 3, 4 or 5 = Number of Impellers. M or E = Power. M: 60Hz 220V/230V 1phase, E: 50Hz 220V/230V 1phase. [blank] or A = Mode. [blank]: Non-automatic models, A: Models with pressure sensor and inverter that are responsible for automatic mode, allowing the pump to operate at the corresponding RPM to maintain the set operating pressure. P = Product Category. P: Complete product. [blank] or S = Accessories. [blank]: No accessories, S: Sun cover.

Approval Holder:
WILO Pumps Ltd.
Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company
Manufacturer:
WILO Pumps Ltd.
Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

Print This Approval


#260308302

Section:
1650 Shower Outlets
Description:
A Shower head(s) and/or shower handset(s).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/03/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlSpout OutletIncludes
26.866.xxxVarious1/2" BSP (M)Open outlet65GroheBodyNoFlow Regulator Fitted, Handset

Notes & Further Information

Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite GL0 – cool sunrise EN0 – brushed nickel DL0 – brushed warm sunset GN0 – brushed cool sunrise A00 – hard graphite MS0 – satin steel MG0 – satin graphite BE0- polished nickel


Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturers:
Grohe AG

Print This Approval


#260302015

Range of shower handsets and shower heads with (plastic bodies - various finishes) Some models incorporate a plastic flow restrictor, or a check valve with built in flow regulator (however, the complete product has not been fully tested to demonstrate it provides backflow protection) or neither (See models for FR or WSCV). Maximum operating temperature 60.0°C Open outlet use only

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
260302015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M) – Shower handsets 13.90mm ID – Showerheads
Marking:
SOLEX on body
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
Shower Handsets: P96400-1-XX (FR) P96400-2-XX (WSCV) P96400-1-white (FR, chrome finish, white faceplate) P96400-2-white (WSCV, chrome finish, white faceplate) Shower Heads: P100300-1-XX (FR) P100300-2-XX (No FR or WSCV) P100300-1-white (With FR, chrome finish, white faceplate) P103000-2-white (No FR or WSCV, chrome finish, white faceplate) P100400-1-XX (With FR) P100400-2-XX (No FR or WSCV) P100400-1-white (With FR, chrome finish, white faceplate) P100400-2-white (No FR or WSCV, chrome finish, white faceplate) Where XX denotes the finish (for both hand showers and showerheads unless otherwise stated) and can be replaced with any of the following KI: Chrome KF: Matt Black DA: Warm sunset GL: Cool Sunrise DL: Brushed warm sunset DC: Super steel AL: Brushed Graphite GN: Brushed cool sunrise MS0: Satin Steel (showerhead only) MG0: Satin Graphite (showerhead only)

Approval Holder:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

Print This Approval


#260304010

Overhead shower outlet with chrome plated plastic body incorporating a filter and a flow regulator. The product incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C..

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
260304010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
T-Safe on face plate.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
02-803500 - Aegis Overhead Shower Filter. Models added March 2026: 02-803510 - Aegis Overhead Shower Filter, 02-803520 - Aegis Overhead Shower Filter.

Approval Holder:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

Print This Approval


#260304024

Range of wall mounted shower outlets with brass bodies (chrome plated). The outlet of the 32971 and 65295 models incorporates an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
260304024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Gessi on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2031
Model:
32971 - Oxygene, 32977 - Font, 65295 - Venti20.

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#260115014

Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400
Marking:
HC Logo, DN, PN, Arrow, Item No, Material, MAP, MOP on Body and Nameplate
Installation Requirements:
R001 R120
Expiry date:
31/01/2031
Model:
HC-91201.F20.CP36-2030 (DN50), HC-91201.F25.CP36-2030 (DN65), HC-91201.F32.CP36-2030 (DN80), HC-91201.F40.CP36-2030 (DN100), HC-91201.F50.CP36-2030 (DN125), HC-91201.F65.CP36-2030 (DN150), HC-91201.F80.CP36-2030 (DN200), HC-91201.10F.CP36-2030 (DN250), HC-91201.12F.CP36-2030 (DN300), HC-91201.15F.CP36-2030 (DN350), HC-91201.20F.CP36-2030 (DN400).

Approval Holder:
HOME CREATOR GROUP LTD
Company Name
HOME CREATOR GROUP LTD
Address
167-169 GREAT PORTLAND STREET LONDON
Postcode
W1W 5PF
Country
United Kingdom

View All Listings by this Company

Print This Approval


#260304011

Range of flow switches with plastic bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1719 Flow Activated Switches
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm & 22mm spigot.
Marking:
Cynergy3 and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/03/2031
Model:
FS15* & FS22* * indicates flow rate and is replaced with: A = normal flow rate & LF = low flow rate

Approval Holder:
Sensata Technologies Baoying Co., Ltd.
Company Name
Sensata Technologies Baoying Co., Ltd.
Address
9 East Taishan Road, Baoying Economic Development Zone, Jiangsu Province, Baoying, 225800
Country
China

View All Listings by this Company

Print This Approval


#260315303

Section:
1780 Taps
Description:
A Hose union tap(s).
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R040 R060
Expiry date:
31/03/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlSpout OutletIncludes
293LKNone1/2" BSP (M)1685Company logo, size and BS1010-2BodyYesRising spindleNot Applicable

Approval Holder:
Taizhou VIR Valve Manufacturing Co., Ltd
Company Name
Taizhou VIR Valve Manufacturing Co., Ltd
Address
Building 3, 1st Standard Workshop, Yuhuan Xuanmen Industry, Taizhou, Zhejiang
Country
China
General Email
157199723@qq.com

View All Listings by this Company
Manufacturers:
TAIZHOU VIR VALVE MANUFACTURING CO., LTD

Print This Approval


#260302028

Range of single hole, single outlet (fixed) pillar taps (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
260302028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Armitage shanks on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2031
Model:
BC123AA

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1031 of 1045

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.