Directory Search Results

Print List

#2206304

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) incorporating quarter turn ceramic disc headworks with either single lever, dome or cross-top operating members. From September 2025 the 167019 and 167019 MBK1 models are also available with a stainless-steel spout. The spout outlets incorporate plastic aerators or flow straighteners with a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2206304
Note:
R009 only applies to models supplied with PEX hoses.
Size:
Stainless steel braided EPDM or PEX lined flexible hoses with ½” BSP (F) captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2027
Model:
Models supplied with both variations of hose. 167019 (Chrome), 167019 MBK1 (Matt black), 167020 (Chrome), 167020 WH (White), 167020A (Chrome), 167020F (Chrome), 167022 (Chrome). Models only supplied with stainless steel braided EPDM lined flexible hoses with ½” BSP (F) captive nut end connections. 167031 (Chrome), 167031F (Chrome).
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2206350

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. The inlet hose incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2206350
Size:
Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on the underside of operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2027
Model:
ACT2096 & ACT3012
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2206323

Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating quarter turn ceramic disk headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a double outlet and a swivel spout.
WRAS Approval Number:
2206323
Size:
Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:
SMR on rear of body
Installation Requirements:
R001 R006
Expiry date:
30/06/2027
Model:
ACT3024 & HF1009
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204072

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (TR1027 and TR1005 models) or a plastic aerator (all other models). The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204072
Size:
¾” BSP (M)
Marking:
R2 (Brand of Rhoper Rhodes) on rear of tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
TR1019/ERGO MOUNTED BATH FILLER (Chrome plated). TR1023/FUSE DECK MOUNTED BATH FILLER (Chrome plated). TR1027/CREW DECK MOUNTED BATH FILLER (Chrome plated). TR1005/JOY DECK MOUNTED BATH FILLER (Chrome plated). Models added Sept 2022: TR1092/ERGO MOUNTED BATH FILLER (Black finish). TR1104/ERGO DECK MOUNTED BATH FILLER (Brass effect finish). TR1098/FUSE MOUNTED BATH FILLER (Black finish). TR1110/FUSE DECK MOUNTED BATH FILLER (Brass effect finish). Models added January 2025: TR1138/CREW BATH FILLER (Brass effect finish). TR1131/CREW BATH FILLER (Gunmetal effect finish).
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2205336

Range of concealed wall mounted two hole, single outlet, (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205336
Note:
To be installed with the universal built in box 98038XXC50 (which is not approved in its own right).
Size:
½” BSP (F).
Marking:
F.IIi Frattini on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
98038XXC50 83548XXC50 83547XXC50 53548XXC50 53548AXXC50 53547XXC50 53547AXXC50 12538XXC50 12538AXXC50 12548XXC50 12548AXXC50 12533XXC50 12533AXXC50 12537XXC50 12537AXXC50 XX denotes the finish and can be replaced with: 00 chrome plated 70 inox finishing 79 black matt 09 bronze 89 black chrome 82 brushed gold 92 pink gold plated 32 pink brushed gold
Product Images

Approval Holder:
RUBINETTERIE FRATELLI FRATTINI SPA
Company Name
RUBINETTERIE FRATELLI FRATTINI SPA
Address
Via Roma 125 SAN MAURIZIO D’OPAGLIO SAN MAURIZIO D'OPAGLIO NO
Postcode
28017
Country
Italy
Phone
+39032296127
General Email
export@frattini.it

View All Listings by this Company
Manufacturer:
RUBINETTERIE FRATELLI FRATTINI SPA
Company Name
RUBINETTERIE FRATELLI FRATTINI SPA
Address
Via Roma 125 SAN MAURIZIO D’OPAGLIO SAN MAURIZIO D'OPAGLIO NO
Postcode
28017
Country
Italy
Phone
+39032296127
General Email
export@frattini.it

View All Listings by this Company

Print This Approval


#2206308

Two hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aeator. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2206308
Size:
¾” BSP (M).
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2027
Model:
25098003 combination tap assembly
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2205050

Wall mounted two-hole, single outlet (fixed) combination tap assemblies, brass bodies with various finishes (see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2205050
Size:
½”- ¾” BSP (M) Offset Union
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R030
Expiry date:
31/05/2027
Model:
31 940 xxx Hansgrohe Focus - Single lever bath mixer for exposed installation. Model added August 2023: 31 954 xxx - Hansgrohe Waterforms - Single lever bath mixer for exposed installation. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2204070

Range of two-hole, single outlet (swivel) combination tap assemblies (various finishes, see models). Incorporating ceramic cartridge headworks and single operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2204070
Size:
Stainless steel braided, PEX lined flexible hose assembly with ½” BSP (F) captive nut end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2027
Model:
VOLA BK5, VOLA BK5A & VOLA BK5B VOLA BK7, VOLA BK7A & VOLA BK7B Stainless Steel trim models. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. Brass trim models. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Difference in Models: VOLA BK5 & VOLA BK7: Mixer Complete with Adjustable bracket and water collection box VOLA BK5A & VOLA BK7A: Mixer with Bracket VOLA BK5B & BK7B: Mixer Alone
Product Images

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2205346

‘Purist’ range of three hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes, see model), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided EPDM lined flexible hose assemblies for installation between the side valves and ‘T’ connector, and a pop-up waste. Maximum working pressure 4.1 bar. Maximum operating temperature 65°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205346
Note:
No testing performed on pop-up waste.
Size:
½” BSP (M).
Marking:
Kohler etched on spout.
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/05/2027
Model:
Purist range: 14406W-3-** (cross top), 14406W-4-** (single lever). Where ** denotes finish and can be replaced with: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2206352

Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating. The spout outlet incorporates an aerator or a flow straightener. Product supplied with stainless steel braided EPDM lined flexible connection hoses. Maximum working pressure 3.5 Bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2206352
Size:
¾” BSP (M) connection
Marking:
THG on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2027
Model:
25SG/W = A4J Hirondelle cristal clair – A4K Hirondelle cristal clair décor platine - A4L Hirondelle cristal clair décor or 25SG/W ICON-X :U7G Icon-X / U7H Icon-X à manettes / U7J Icon-X, insert metal / U7K Icon-X à manettes, insert metal / U7L Icon-X, Titane / U7M Icon-X à manettes, Titane / U7N Icon-X, pierre à définir – U7P Icon-X à manettes, pierre à définir/ U7S - Icon-X , Carbone or / U7T Icon-X à manettes, Carbone or – 25SG/W CORVAIR: U8D Corvair / U8E Corvair à manettes / U8F Corvair marbre Howlite / U8G Corvair à manettes marbre Howlite / U8H Corvair marbre Portoro / U8J Corvair à manettes marbre Portoro / U8K Corvair marbre Fior di Bosco / U8L Corvair à manettes marbre Fior di Bosco / U8M Corvair pierre à définir / U8N Corvair à manettes pierre à définir 25/W MONTAIGNE: G3T Montaigne marbre Leonardo Grey Finishing: A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD, H60 – Matt blush PVD H62 – Blush PVD, H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 104 of 428

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.