Range of pillar taps (chromium plated brass), incorporating non-rising spindle headworks with various operating members (see model). The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. BS6920 65°C.
Range of PEX or PVC lined interlocked shower hoses (chrome plated) incorporating a stainless steel EPDM strainer washers or EPDM washers. Maximum operating temperature 85.0°C (PEX models) or 65.0°C (PVC models).
Range of stainless steel interlocked shower hoses with PVC inner liner and EPDM gaskets and stainless steel strainers.
Non-metallic materials and components comply with BS6920 at 65°C
Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Air Source Hot Water Cylinder range of cased and insulated, unvented hot water storage cylinders (enamelled steel) of the package type incorporating heat pump module. The DHW circuit includes a factory fitted temperature & pressure relief valve (Caleffi) set at 7 bar and 95˚C . The safety kit incorporates a pressure reducing valve (Caleffi) set at 3.5 bar, strainer, check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2 and an expansion valve (Caleffi) set at 6 bar, expansion vessel (Reflex) and a tundish (Caleffi). The temperature of the hot water is controlled by a factory fitted manual control (set at 60˚C) and a high pressure switch positioned on the heat pump module (maximum temperature 65˚C) The cylinders are factory fitted with standard dual control immersion heater. Immersion heater incorporate control and manual resetting thermostats (maximum 89˚C). Maximum working pressure 5.5 Bar Maximum operating temperature 75°C. Maximum supply pressure to the pressure reducing valve is 12 bar. Maximum working pressure of the primary circuit 3.5 bar. Maximum operating temperature 80°C.
Range of wall mounted exposed and concealed thermostatic shower valves, chrome plated brass body or brass bodies with chrome trim sets). Incorporating a single sequential headwork controlling both flow and temperature with single lever operating members. The inlets incorporate plastic flow regulators. Model (1.1656.011) is supplied with a shower hose, handet and riser rail assembly. Model (1.1656.012) is supplied with a wall mounted shower outlet, hose, handset and riser rail assembly. Model (1.1656.013) is supplied with a wall mounted shower arm and an overhead shower. Maximum operating pressure 5 bar. Maximum operating temperature 65°C
Range of wall mounted concealed and exposed thermostatic shower valves, (chrome plated brass bodies or chrome trim sets), incorporating single sequential headworks controlling both the flow and temperature. The inlets incorporate single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with flow regulators. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C
Range of MIRA MODE high pressure or pumped, wall fed or ceiling fed bath/shower mixing valves supplied with overhead shower and shower handsets. Inlets are supplied with isolation valves. Maximum working pressure 5 bar for high pressure models and 1 bar for pumped models. Non-metallic materials and components comply with BS6920 at 48°C.
Range of butterfly valves with blue epoxy coated ductile iron bodies and discs, and EPDM seals with handwheel gear operating members. Maximum working pressure – 10 bar or 16 bar, see models. Maximum operating temperature – 23°C.
Range of wafer type & lug type butterfly valves with blue epoxy coated ductile iron (V9911 & V9912) or stainless steel bodies (V9952), stainless steel discs and EPDM seats. The products are supplied with either a lever, gearbox (below DN250), electric or pneumatic actuating operating members. Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Page 102 of 247
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
