KEUCO GmbH & Co. KG Approvals


#1903317

Range of ceiling or wall mounted shower arms with brass bodies (various finishes - see model). Maximum working temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903317
Expiry date:
31/03/2024
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on faceplate
Installation Requirements:
R001 R040
Model:
51688 xxyyzz - shower arm for wall mounting, 53088 xxyyzz - shower arm for wall mounting. xx = 01 - chrome plated; 02 - polished bronze; 03 - brushed bronze; 04 - polished nickel; 05 - brushed nickel; 07 - stainless steel finish; 12 - polished black chrome; 13 - brushed black chrome & 17 - aluminium finish. yy = 03 - 300mm length; 04 - 450mm length. zz = 00 - rosette round; 02 - rosette square. 51689 xxyyzz - shower arm for ceiling mounting, 53089 xxyyzz - shower arm for ceiling mounting. xx = 01 - chrome plated; 02 - polished bronze; 03 - brushed bronze; 04 - polished nickel; 05 - brushed nickel; 07 - stainless steel finish; 12 - polished black chrome; 13 - brushed black chrome & 17 - aluminium finish. yy = 01 - 100mm length; 03 - 300mm length. zz = 00 - rosette round; 02 - rosette square.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1907364

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907364
Expiry date:
31/07/2024
Note:
The 59553 000070 concealed thermostatic functional unit - rough part is not approved in its own right. This product does not incorporate a flow control device.
Size:
½” BSP (M)
Marking:
KEUCO on face plate. KEUCO P-IX28727/1C on operating member.
Installation Requirements:
R001 R010 R040
Model:
59553 000070 concealed thermostatic functional unit - rough part to be installed in conjunction with: 59553 xx00zz – IXMO (concealed thermostatic mixer - trim set) Model added November 2020: Edition 90 - 59053 xx0001 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911307

Wall mounted concealed three way diverter valve assembly (brass bodies with trim sets in various finishes). Using either a dome (00 handle) or single lever (10 handle) operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2050 Valves
Section Subtitle:
Diverter.
WRAS Approval Number:
1911307
Expiry date:
30/11/2024
Note:
The 59548 000070 concealed functional unit is not approved in its own right.
Size:
½” BSP (M)
Marking:
KEUCO on the rosette
Installation Requirements:
R001 R040
Model:
59548 xxyyzz Model added September 2020: Edition 90 - 59048 xx0001 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory. This can be replaced with: 00 - Handle IXMO Pure, 10 - Handle IXMO Comfort ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be installed in conjunction with the rough set: 59548 000070 - concealed functional unit.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911333

Wall mounted, concealed, shower control valve with a hose connection outlet and shower holder option, (brass bodies with trim sets in various finishes). Using either a dome (01 handle) or single lever (11 handle) operating member. The inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911333
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose or shower handset. The 59541 000170 concealed functional unit is not approved in its own right.
Size:
½” BSP (M
Marking:
Keuco on rosette trim
Installation Requirements:
R001 R040
Model:
59541 xxyyzz – IXMO Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory, this can be replaced with: 01 - Handle IXMO Pure 11 - Handle IXMO Comfort 02 - With integral shower handset holder and handle IXMO Pure 12 - With integral shower handset holder and handle IXMO Comfort ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be used in conjunction with the following concealed body: 59541 000170
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911334

Concealed brass bodied two way shower to shower diverter and stop valve (2 on, 1 off), with various trim set finishes and operating members. All products have a shower outlet connection, but only specific models incorporate a shower handset holder (see model). The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911334
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The concealed body 59556 000170 is not approved in its own right.
Size:
½” BSP (M)
Marking:
Keuco on rosette
Installation Requirements:
R001 R040
Model:
59557 xxyyzz - IXMO 'xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes operating member and accessory, this can be replaced with: 01 - IXMO handle IXMO Pure, 02 - IXMO handle IXMO Pure with shower holder, 11 - handle IXMO Comfort or 12 - handle IXMO Comfort with shower holder. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared. To be used in conjunction with the following concealed body: 59556 000170
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911335

Concealed brass bodied two way shower to shower diverter and stop valve (2 on, 1 off), with various trim set finishes and operating members. Maximum working pressure 10.0 bar. Maximum working temperature 60°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
1911335
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The concealed body 59556 000070 is not approved in its own right.
Size:
½” BSP (M)
Marking:
Keuco on rosette trim
Installation Requirements:
R001 R040
Model:
59557 xxyyzz - IXMO. Model added September 2020: Edition 90 - 59057 xx0001 xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel finish, 17 - aluminium finish, 12 - polished black chrome, 13 - brushed black chrome. ‘yy’ denotes operating member and accessory, this can be replaced with: 00 - IXMO handle IXMO Pure, 10 - IXMO handle IXMO Comfort. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round, 02 - rosette squared. To be used in conjunction with the following concealed body: 59556 000070
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#1911343

Wall mounted, concealed, thermostatic shower valve, (brass bodies with trim sets in various finishes), incorporating a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member. The inlets each incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911343
Expiry date:
30/11/2024
Note:
This approval does not include a shower hose and handset. The 59554 000170 - IXMO Solo thm - concealed thermostatic functional unit is not approved in its own right.
Size:
½” BSP (F)
Marking:
KEUCO on rosette
Installation Requirements:
R001 R010 R040
Model:
59554 xx00zz IXMO solo thm Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round, 02 - rosette squared, . 21 - as set with rosette round, 22 - as set with rosette squared. Models ending 01 & 02 must be installed in conjunction with the rough set, which is a separate item. Models ending 21 & 22 include this rough in set: 59554 000170 - IXMO Solo thm - concealed thermostatic functional unit.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005306

Wall mounted concealed single lever basin mixer (brass body), having a ceramic cartridge headwork which control the flow and temperature with a lever type operating member. The spout outlet (chromium plated brass) incorporates an aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2005306
Expiry date:
31/05/2025
Note:
The concealed rough in part 59916 000070 is not approved in its own right.
Size:
½” BSP (F)
Marking:
Keuco on spout.
Installation Requirements:
R001 R010 R040
Model:
59016xxyyzz Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. ‘yy’ denotes trim plate: 02 – rosette round ‘zz’ denotes spout length: 00 - spout 219mm, 01 – spout 187mm, 02 spout 265mm
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005307

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005307
Expiry date:
31/05/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Keuco on spout
Installation Requirements:
R001 R006 R009 R010
Model:
59002 xxyy00 – Edition 90 - 155 59002 xxyy03 – Edition 90 - 250 59004 xxyy00 – Edition 90 - 115 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. yy denotes pop up waste: 00 - with pop up waste, 01 - without pop up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005335

Range of spout outlets with brass bodies (various finishes), EPDM ‘O’-rings and a plastic aerator. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2005335
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Keuco on body.
Installation Requirements:
R001 R040
Model:
59045 XX 00 ZZ Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘ZZ’ denotes spout lengh, and is replaced with: 00 = 152mm, 01 = 202mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005337

Range of ceiling mounted shower arms with brass bodies (various finishes) having a threaded connection at the outlet and incorporating EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005337
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on shower arm
Installation Requirements:
R001 R040
Model:
59089 XXYY01 Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘XX’ denotes finish, and is replaced with: 01 - 100mm, 03 - 300mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2005336

Range of shower arms having brass bodies (various finishes) incorporating a threaded connection at the outlet and EPDM ‘O’-rings. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005336
Expiry date:
31/05/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Keuco on shower arm.
Installation Requirements:
R001 R040
Model:
59088 XXYY01 Edition 90 Where ‘XX’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. Where ‘YY’ denotes spout lengh, and is replaced with: 03 - 300mm, 04 - 450mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2012085

Range of shower handsets and shower heads with chrome plated bodies and built in flow restrictors. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2012085
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
see model
Marking:
KEUCO ON HANDSET
Installation Requirements:
R001 R040
Model:
Shower handsets - ½” BSP (M): xx- finish 01 Chrome Plated 02 Polished Nickel 03 Brushed Bronze 04 Polished Nickel 05 Brushed Nickel 07 Stainless Steel Finish 12 Polished Black Chrome 13 Brushed Black Chrome 17 Aluminium Finish
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2012305

Three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome (cube) type operating members. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Product is supplied with stainless steel braided, PEX lined connection hoses and pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2012305
Expiry date:
31/12/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
59015 xxyy00 Edition 90 – 3 hole basin mixer with pop-up waste. Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. Where yy denotes: 00 supplied with pop-up waste 01 without pop-up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2111313

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111313
Expiry date:
30/11/2026
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009 R010
Model:
51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201315

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201315
Expiry date:
31/01/2027
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59509 xx1000 59509 xx2000 59509 xx3000 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201316

Range of wall mounted single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The external part is supplied with a concealed rough part for connection to water supplies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201316
Expiry date:
31/01/2027
Note:
Rough in set not approved in its own right.
Size:
½” BSP (F)
Marking:
Keuco on back plate
Installation Requirements:
R001 R010 R040
Model:
59516 xxy2zz 59516 xxy3zz 59916 000075 concealed rough part Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. 37 - Black Matt Where ‘Y’ denotes spout projection, and is replaced with: 0 - 165mm 1 - 225mm Where “ZZ” denotes rosette and is replaced with: 01 - Round rosette 02 - Square roseete
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2201317

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating members, and the spout outlet incorporates a plastic aerator. The product can be supplied with or without a pop-up waste arrangement. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201317
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
59502 xx1y00 59504 xx1y00 59510 xx1y00 59502 xx2y00 59504 xx2y00 59510 xx2y00 59502 xx3y00 59504 xx3y00 59510 xx3y00 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated 02 - polished bronze 03 - brushed bronze 04 - polished nickel 05 - brushed nickel 07 - stainless steel 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - Black Matt y denotes pop up waste: 0 - with pop up waste 1 - without pop up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2203351

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated via an infra-red sensor either battery or power supply. The product incorporates a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203351
Expiry date:
31/03/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010 R570
Model:
59511 xx1100 59512 xx1100 Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. 37 – black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2210800

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product can be supplied with a pop-up waste (see model section) Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210800
Expiry date:
31/10/2027
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R009 R010
Model:
Edition 11 single lever basin mixer with/without pop-up waste models: 51102 xxyyzz 51104 xxyyzz Where xx denotes finish and can be replaced by: 01 chrome plated 02 polished bronze 03 brushed bronze 04 polished nickel 05 brushed nickel 12 polished black chrome 13 brushed black chrome Where yy denotes with or withour pop-up waste: 00 with pop-up waste 01 without pop-up waste. Where zz denotes discharge height and can be replaced with: 00 discharge height is either 110mm (51104 model) or 150mm (51102 model) 03 discharge height is 250mm (51102 model only).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2211816

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model), comprising of a concealed rough in set (brass) incorporating a ceramic cartridge headwork and a trim set consisting of a spout and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2211816
Expiry date:
30/11/2027
Note:
The 59916 000070 rough in set is not approved in its own right.
Size:
½” BSP (F).
Marking:
Keuco on spout back plate.
Installation Requirements:
R001 R010 R040
Model:
51516 xxyyzz - Edition 400 trim set, which must be installed with the 59916 000070 rough in set. Where: xx = finish. 01 chrome plated, 02 polished bronze, 03 brushed bronze, 04 polished nickel, 05 brushed nickel, 12 polished black chrome, 13 brushed black chrome. yy = 02 rosette round. zz = spout projection. 00 - 219mm, 01 - 187mm, 02 - 265mm.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2301800

‘Edition 400’ range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with asingle lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with or without a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301800
Expiry date:
31/01/2028
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body.
Installation Requirements:
R001 R006 R009 R010
Model:
‘Edition 400’ range: 51502 xx0000, 51502 xx0100, 51502 xx0002, 51502 xx0102, 51502 xx0003 & 51502 xx0103. 51504 xx0000, 51504 xx0100, 51504 xx0002 & 51504 xx0102. ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2301801

Range of pillar taps (brass body in various finishes) incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2301801
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ⅜” captive nut end connection.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009
Model:
51508 xx0100 – Edition 400 ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, - 12 polished Black Chrome & 13 - brushed Black Chrome.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2301350

Single hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Lever operated pop up waste provided with some models Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2301350
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010
Model:
51505xxyy00 Edition 400 xx = surface finish yy = 00 with pop-up waste, without pop-up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2303353

Range of wall mounted, concealed manually blending shower valves, incorporating a ceramic cartridge headwork and various lever operating members. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2303353
Expiry date:
31/03/2028
Size:
½” BSP (M)
Marking:
Keuco on rosette
Installation Requirements:
R001 R010 R040
Model:
Trim set models: 59551 XXYYZZ IXMO. ‘XX’ denotes finish and is replaced with: 01 - chrome, 02- polished bronze, 03- brushed bronze, 04-polished nickl, 05- brushed nickel, 12 – polished black chrome, 13- brushed black chrome, 07 - stainless steel or 17 – aluminium and 37- black matt. ‘YY’ denotes lever variants and is replaced with: 95 – pure, 02 – soft, 03- flat, 90- edition 90, 15- edition 400, 39 – plan blue, 27 – Moll, 16 – Elgance, 11- edition 11, 49 – plan, 30 – edition 300 ‘ZZ’ denotes rosette type, and is replaced with either: 01 – rosette round or 02 – rosette squared.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2304300

Wall mounted, concealed, manually operated blending shower valve, brass body(various finishes). Incorporating a ceramic cartridge headwork and single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2304300
Expiry date:
30/04/2028
Size:
½” BSP (F)
Marking:
Keuco on faceplate.
Installation Requirements:
R001 R010 R040
Model:
59552 xxyyzz - IXMO Solo ‘xx’ denotes finish, and can be replaced with: 01 - chrome, 02- polised bronze, 03 – brushed bronze, 04 - polished nikel, 05 - brushed nickel, 12 - polished black chrome, 13 – brushed black chrome, stainless steel or 17 – aluminium finish 37- black matt. “yy” donates lever type and can be either: 95 – pure, 02- soft or 03 – flat, ‘zz’ denotes rosette type, and can be either: 01 - round or 02 - squared. The product is for use with 59552 000170 - concealed functional unit .
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2304310

Edition 11’ range of wall mounted, concealed, two hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2304310
Expiry date:
30/04/2028
Size:
½” BSP (F)
Marking:
Keuco on spout.
Installation Requirements:
R001 R010 R040
Model:
Edition 11 - Spout and trim sets: 59916 000070 ‘rough set’ used with one of the following trim sets 51116 xx0200, 51116 xx0201, 51116 xx0202. ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished chrome, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome, 13 - brushed black chrome.
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2301802

‘Edition 400’ range of three hole, single outlet (fixed) combination tap assemblies (brass body available in various finishes) incorporating a half turn ceramic disc headwork controlling temperature, and a quarter turn ceramic disc headwork controlling the flow, both using dome type operating members. The spout outlets incorporate a plastic aerator. The models are supplied with or without a pop-up waste. The products are all supplied with single check valve assemblies, verified by test (suitable for backflow prevention against Fluid Category 2), intended for installation on each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2301802
Expiry date:
31/01/2028
Note:
No testing performed on pop-up waste.
Size:
3/8” BSP (F)
Marking:
Keuco on spout.
Installation Requirements:
R001 R006 R007 R009
Model:
51515 xxyy00 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 12 - polished black chrome & 13 - brushed black chrome 'yy' denotes whether the product has a pop-up waste and is replaced with: 00 - with pop-up waste & 01 - without pop-up waste
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2310801

Conealed wall mounted installation set with a brass body. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2310801
Expiry date:
31/10/2028
Size:
½” BSP (M)
Marking:
KEUCO on Mounting Plate
Installation Requirements:
R001 R040
Model:
59547 000170.
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2310802

Range of wall mounted spouts with a brass body (various finishes, see model). The outlet incorporates a plastic aerator. Maximum operating temperature - 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2310802
Expiry date:
31/10/2028
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
KEUCO on Rosette
Installation Requirements:
R001 R040
Model:
59545 xxyyzz xx denotes the finish and is replaced with: 01 chrome plated, 02 polished bronze, 03 brushed bronze, 04 polished nickel, 05 brushed nickel, 07 stainless steel finish, 12 polished black chrome, 13 brushed black chrome, 17 aluminium finish, 37 black matt. yy denotes the spout length and is replaced with: 00 = length 152mm, 01 = length 202mm. zz denotes the style of rosette and is replaced with: 01 rosette round, 02 rosette square.
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2310370

Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2310370
Expiry date:
31/10/2028
Note:
This product is to be installed with concealed rough set 59916000075.
Size:
½” BSP (F)
Marking:
Keuco on back plate
Installation Requirements:
R001 R010 R040
Model:
59516xxy1zz – IXMO Pure 51516xxy1zz – Edition 400 59916000075 – concealed rough set Model: 51116xxy3zz - Edition 11 added March 2024 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. 37 - Black Matt Where ‘Y’ denotes spout projection, and is replaced with: 0 - 165mm 1 - 197mm 2 – 243mm Where “ZZ” denotes rosette and is replaced with: 01 - Round rosette 02 - Square rosette
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2310371

Range of concealed wall mounted valve assemblies (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork with a dome type operating member. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2310371
Expiry date:
31/10/2028
Size:
½” BSP (M)
Marking:
Keuco on face plate
Installation Requirements:
R001 R010 R040
Model:
59541xxyyzz – Concealed Stop Valve 59541000070 – Concealed Functional Unit xx denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 – brushed nickel, 07 - stainless steel, 12 - polished black chrome 13 - brushed black chrome 17 - aluminium finish 37 - black matt yy denotes operating member and is replaced with: 00 handle IXMO Pure; 10 Handle IXMO Comfort zz denotes rosette style: 01 rosette round; 02 rosette squared
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2310372

Wall mounted, shower control valve, (brass body – various finishes), incorporating a half turn ceramic disc headwork using a dome type operating member. The shower outlet connection incorporates an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2310372
Expiry date:
31/10/2028
Note:
Not supplied with shower hose and handset. The concealed functional unit 59556 000170 is not approved in its own right.
Size:
½” BSP (M)
Marking:
Keuco on faceplace
Installation Requirements:
R001
Model:
59556 xxyyzz – IXMO 59556 000170 ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome or 17 - aluminium finish. 37 - black matt ‘yy’ denotes operating member and accessory. This can be replaced with: 01 - IXMO Pure, 02 - IXMO Pure with shower holder, 11 - IXMO Comfort or 12 - IXMO Comfort with shower holder. ‘zz’ denotes rosette style and is replaced with either: 01 - rosette round or 02 - rosette squared.
Factor:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2309342

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies, (chromium plated brass body). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309342
Expiry date:
30/09/2028
Size:
3/8” BSP (F).
Marking:
Keuco on faceplate
Installation Requirements:
R001 R040
Model:
59517 xx11zz.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.