Samuel Heath & Sons Plc Approvals


#2209059

Overhead shower outlet with a chromium plated brass body. The inlet incorporates a plastic flow restrictor. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2209059
Expiry date:
30/09/2027
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
SHS on rear of body
Installation Requirements:
R001 R040
Model:
V189-W 300mm Easy clean shower head
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval


#2211039

Range of three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks and various operating members (see models). The products are supplied with or without a lever type operated pop-up waste (see models) and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2211039
Expiry date:
30/11/2027
Note:
No testing performed on pop up waste.
Size:
1/2" BSP (M).
Marking:
SHS on underside of operating member.
Installation Requirements:
R001 R006 R007 R010
Model:
Model: Style Moderne V6K14YY-XX: 3H Basin Filler with pop up waste V6K14YYNP-XX: 3H Basin Filler without pop up waste Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, or CCR = Clear Glass Levers. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or CTB = City Bronze.
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval


#2212036

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets for the V7K20 models incorporate plastic flow straighteners and the V7K35 models incorporate plastic aerators. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2212036
Expiry date:
31/12/2027
Size:
½” BSP (M) (To be installed with installation kit: V720V2-LH-IS which has ½” BSP (F)– Approved separately)
Marking:
Samuel Heath on wall plate and spout
Installation Requirements:
R001 R010 R040
Model:
V7K20-1YY-LH-XX V7K20-1YY-RH-XX V7K20-2YY-LH-XX V7K20-2YY-RH-XX V7K20-3YY-LH-XX V7K20-3YY-RH-XX V7K20-1YY-NP-XX V7K20-2YY-NP-XX V7K20-3YY-NP-XX V7K35-1YY-LH-XX V7K35-1YY-RH-XX V7K35-2YY-LH-XX V735K-2YY-RH-XX V7K35-1YY-NP-XX V7K35-2YY-NP-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303701

Range of wall mounted, three-hole single outlet combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets for models (V117 XX and V120 XX) incorporate plastic aerators and model (V147 XX) incorporates a plastic flow straightener. The spout inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2303701
Expiry date:
31/03/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R010 R040
Model:
V117-CP V120-CP V147-CP Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303702

Wall mounted spout outlet brass body (various finishes) incorporating plastic flow straightener. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2303702
Expiry date:
31/03/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on Spout
Installation Requirements:
R001
Model:
V157-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2301035

Range of four-hole, single outlet (swivel) combination tap assemblies (various finishes, see models), incorporating quarter turn ceramic disc headworks with a variety of operating members (see models) and a self-cancelling diverter to shower outlet. The spout outlets incorporate plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2301035
Expiry date:
31/01/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on base of spout
Installation Requirements:
R001 R006 R030
Model:
V2K48YY-XX Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303026

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies, (brass bodies, various finishes – see model) incorporating quarter turn ceramic disc headworks. The spout inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2303026
Expiry date:
31/03/2028
Note:
The products are to be used with V718-IS-XX rough kit, however, the rough kit is not part of this approval.
Size:
3/4” BSP (M) (Headwork & Spout) specifically for use with rough kit V718-IS-XX which has 3/4" BSP (F)
Marking:
SHS on Body
Installation Requirements:
R001 R010 R040
Model:
T20K17-1YY-XX T20K17-2YY-XX Models added March 2024: T11K17-1YY-XX T11K17-2YY-XX Where the product code suffix YY denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: COL = Lever One, or CBA = T-Bar. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303031

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see models), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model V110V2-XX also comes supplied with a lever operated pop up waste. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303031
Expiry date:
31/03/2028
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided, PEX lined flexible hoses with 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on base of tap
Installation Requirements:
R001 R006 R009 R010
Model:
V109V2-XX V110V2-XX V129V2-XX V130V2-XX V131V2-XX XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303050

Range of wall mounted installation kits with brass bodies Maximum working pressure 5.0 bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2303050
Expiry date:
31/03/2028
Size:
See model.
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
V118-IS-XX – ¾” BSP x 15mm compression. V218-IS-XX – ¾” BSP x 15mm compression. V158-IS-XX – ½” BSP (F) XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, as examples: CP = chrome finish, URM urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304048

Three-hole, single outlet (fixed) combination tap assembly (brass body – various finishes). Incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever type pop-up waste and stainless steel braided EPDM lined connection hoses. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2304048
Expiry date:
30/04/2028
Note:
No testing performed on pop up waste.
Size:
½” BSP (M)
Marking:
Samuel Heath on front of body
Installation Requirements:
R001 R005 R010
Model:
V2K14YY-XX – 3 Hole basin filler with pop-up waste Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or BCG = Brushed Gold Gloss Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304049

Three-hole, single outlet (fixed) combination tap assembly (brass body – various finishes). Incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever type pop-up waste and stainless steel braided EPDM lined connection hoses Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2304049
Expiry date:
30/04/2028
Note:
No testing performed on pop up waste.
Size:
½” BSP (M)
Marking:
Samuel Heath on front of body
Installation Requirements:
R001 R006 R010
Model:
V2K15YY-XX - 3 Hole basin filler with pop-up waste Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or BCG = Brushed Gold Gloss Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304058

Range of wall mounted, three-hole, single outlet, combination tap assemblies, (brass bodies - various finishes) incorporating ceramic cartridge headworks with various operating members. The spout incorporates a self-cancelling diverter to shower outlet and plastic aerators. The spout inlets incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. The products are supplied with a shower hose and handset. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0655 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2304058
Expiry date:
30/04/2028
Size:
½” BSP (F).
Marking:
Samuel Heath on wall plate or escutcheon.
Installation Requirements:
R001 R030
Model:
V7K43-1YY-XX - 3 Hole Wall Mounted Bath Filler V7K43-2YY-XX - 3 Hole Wall Mounted Bath Filler V7K43-1YYNP-XX - 3 Hole Wall Mounted Bath Filler – No Plate V7K43-2YYNP-XX - 3 Hole Wall Mounted Bath Filler – No Plate Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303048

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see models), incorporating quarter turn ceramic disc headworks and a manual diverter to shower outlet. The product incorporates brass backnuts. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2303048
Expiry date:
31/03/2028
Size:
3/4" BSP (M)
Marking:
SAMUEL HEATH on rear of body
Installation Requirements:
R001 R005 R020
Model:
V2K30YY-XX V2K31YY-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303049

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes), incorporating quarter turn ceramic disc headworks and a manual diverter to shower outlet. Operating members not supplied. Maximum working pressure 5.0 Bar temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2303049
Expiry date:
31/03/2028
Size:
3/4" BSP (M)
Marking:
SAMUEL HEATH on rear of body
Installation Requirements:
R001 R010 R040
Model:
V2K32YY-XX V2K33YY-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2012114

Shower handset chrome plated plastic bodies and built in combined flow restrictors/approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models added March 2023 are available in various finishes, see model.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2012114
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
Please refer to model.
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
Shower handset - ½” BSP (M): V182W-XX Slimline
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval


#2305069

Concealed wall mounted rough inset with a brass body, incorporating EDPM O-rings. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2305069
Expiry date:
31/05/2028
Size:
½” BSP F Inlets
Marking:
SHS logo on body
Installation Requirements:
R001 R010 R040
Model:
T2020-IS-XX Where the product code suffix ‘XX’ denotes the product is unfinished
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2305072

Range of floor mounted, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with various - operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2305072
Expiry date:
31/05/2028
Note:
Rough inset is not supplied as part of this approval.
Size:
½” BSP (F)
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R030
Model:
The One Hundred Collection: T10K36-YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LA = Wing Lever, or LB = Luxe Lever
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304041

Wall mounted spout outlet (brass body – various finishes) incorporating a plastic flow straightener. The inlet incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2304041
Expiry date:
30/04/2028
Size:
¾” BSP (M)
Marking:
SHS logo on body
Installation Requirements:
R001 R040
Model:
T2046-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2305071

Range of wall mounted, two-hole, single outlet (fixed) combination taps assemblies (brass bodies - in various finishes), incorporating ceramic cartridge headworks with various operating members. The spout outlets incorporate plastic aerators. The inlet of the spout outlets incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2305071
Expiry date:
31/05/2028
Note:
The rough set is not supplied as part of this approval.
Size:
½” BSP (F) rough set
Marking:
SHS logo on underside of spout
Installation Requirements:
R001 R010 R040
Model:
T2020-1YY-XX T2020-2YY-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2306030

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks, the spout outlet incorporates a plastic aerator. The spout inlet Incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2306030
Expiry date:
30/06/2028
Note:
The products are to be used in conjunction with V720-LH-IS-XX (Installation Kit - LH). V720-RH-IS-XX (Installation Kit – RH).
Size:
½” BSP (F)
Marking:
Samuel heath on faceplate
Installation Requirements:
R001 R010 R040
Model:
V720-1FLH-XX V720-1FRH-XX V720-2FLH-XX V720-2FRH-XX V720-3FLH-XX V720-3FRH-XX V720-1KLH-XX V720-1KRH-XX V720-2KLH-XX V720-2KRH-XX V720-3KLH-XX V720-3KRH-XX V720-1FNP-XX V720-2FNP-XX V720-3FNP-XX V720-1KNP-XX V720-2KNP-XX V720-3KNP-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2306033

Single hole, single outlet (fixed) combination tap assembly (brass body – various finishes), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2306033
Expiry date:
30/06/2028
Size:
Stainless steel braided, EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connections.
Marking:
SHS logo on spout
Installation Requirements:
R001 R010 R006
Model:
T2010-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, CTL = Lever two Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = Urban brass matt lacquered
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2306063

Range of shower arms and elbows (brass bodies – various finishes). Maximum operating temperature: (T2064W) - 95.0°C (T2062W, T2069W & T2069SW) - 85.0°C (T2066W) - 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2306063
Expiry date:
30/06/2028
Note:
Open outlet use only.
Size:
½” BSP (M) 15mm compression X ½” BSP (F) elbow (T2062W)
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
T2062W T2064W T2066W T2069W T2069SW Models: For_me T2062W-XX, T2064W-XX, T2066W-XX, T2069W-XX, T2069SW-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2309038

Wall mounted shower arm with a chrome plated brass body.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2309038
Expiry date:
30/09/2028
Note:
Open outlet use only.
Size:
½” BSP M
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
T162W-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2309053

Concealed, wall mounted, three-hole, single outlet (fixed) combination tap assembly (brass body - various finishes) incorporating quarter turn ceramic disc headwork. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2309053
Expiry date:
30/09/2028
Note:
The products are to be used with V718-IS-XX rough kit, however, the rough kit is not part of this approval.
Size:
3/4” BSP (M) (Headwork & Spout) specifically for use with rough kit V718-IS-XX which has 3/4" BSP (F)
Marking:
SHS on spout.
Installation Requirements:
R001 R010 R040
Model:
T20K47-YY-XX Model added March 2024: One Hundred Collection T11K47-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: COL = Lever One, or CBA = T-Bar. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2310037

Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2310037
Expiry date:
31/10/2028
Note:
This approval does not include a shower hose, shower riser, overhead shower or shower handset.
Size:
1/2" BSP (M)
Marking:
Samuel Heath on body
Installation Requirements:
R001 R010 R040
Model:
V640-XX Style Moderne ½” Exposed thermostatic shower valve. To be used in conjunction with the following controller variations: V621-TM-XX Trim Set Metal Lever V621-TMB-XX Trim Set Metal Lever – Black V621-TX-XX Trim Set Cross Top V621-TXB-XX Trim Set Cross Top – Black V621-TD-XX Trim Set Luxe Roundel Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311703

Two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes), incorporating quarter turn ceramic disc headworks with various operating members, and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlet to the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose and handset. The shower handset incorporates a plastic flow restrictor on the inlet. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2311703
Expiry date:
1/12/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R006 R020
Model:
V630-XX Bath Shower Mixer Deck Mounted Model without controllers: V630-XX Bath / Shower Mixer Deck Mounted Controller options: V651-MB-XX = Metal Levers V651-MBB-XX = Gloss Black Levers V651-XB-XX = Cross Tops V651-XB-GBC = Gloss Black Chrome Cross Tops V651-BCQ-XX = Black Quilted Crystal Levers V651-CCQ-XX = Clear Quilted Crystal Levers V651-BCR-XX = Black Radiant Crystal Levers V651-CCR-XX = Clear Radiant Crystal Levers V651-L-XX = Luxe Levers V651-D-XX = Luxe Roundels Models with controllers: V6K30M-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-MB-XX Lever(s). V6K30MB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX andV651-MBB-XX Lever(s). V6K30X-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-XB-XX Lever(s). V6K30XB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX and V651-XB-GBC-XX Lever(s). V6K30L-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-L-XX Lever(s). V6K30D--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-D-XX Lever(s). V6K30BCQ-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCQ-XX Lever(s). V6K30CCQ--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCQ-XX Lever(s). V6K30BCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCR-XX Lever(s). V6K30CCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCR-XX Lever(s). Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2310066

Wall mounted, two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes), incorporating quarter turn ceramic disc headworks with various operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener, and the shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose and handset. The shower handset incorporates a plastic flow restrictor on the inlet. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2310066
Expiry date:
31/10/2028
Size:
¾” BSP (M) to ¾” BSP (M) Offset Unions
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R020
Model:
V632-XX Bath Shower Mixer Wall Mounted Model without controllers, hose & handset: V632-XX Bath / Shower Mixer Wall Mounted Controller options for these mixers: V651-MB-XX = Metal Levers V651-MBB-XX = Gloss Black Levers V651-XB-XX = Cross Tops V651-XB-GBC = Gloss Black Chrome Cross Tops V651-BCQ-XX = Black Quilted Crystal Levers V651-CCQ-XX = Clear Quilted Crystal Levers V651-BCR-XX = Black Radiant Crystal Levers V651-CCR-XX = Clear Radiant Crystal Levers V651-L-XX = Luxe Levers V651-D-XX = Luxe Roundels Models with controllers: V6K32M-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-MB-XX Lever(s). V6K32MB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX andV651-MBB-XX Lever(s). V6K32X-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-XB-XX Lever(s). V6K32XB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX and V651-XB-GBC-XX Lever(s). V6K32L-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-L-XX Lever(s). V6K32D--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-D-XX Lever(s). V6K32BCQ-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCQ-XX Lever(s). V6K32CCQ--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCQ-XX Lever(s). V6K32BCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCR-XX Lever(s). V6K32CCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCR-XX Lever(s). Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2401703

Range of wall mounted shower arms, (brass bodies - various finishes) incorporating EPDM ‘O’- rings.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2401703
Expiry date:
31/01/2029
Note:
Open outlet use only.
Size:
15mm compression x ½” BSP (M) (V162W-XX & V262W-XX) or ½” BSP (M) (V662W-XX)
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
V162W-XX, V262W-XX, V662W-XX. Where XX denotes the finish and can be replaced with any of the following: Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311019

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 3.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311019
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on body
Installation Requirements:
R001 R006 R009 R010
Model:
V7K32YY-XX Models: Landmark V7K32YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311032

Range of wall mounted three-hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks, (various operating members). The spout outlet incorporates a single check valve cartridge however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection and a plastic aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2311032
Expiry date:
30/11/2028
Note:
The wall mounted installation kit is not supplied as part of this approval.
Size:
¾” BSP F
Marking:
Samuel heath on spout backplate or SHS on underside of operating member.
Installation Requirements:
R001 R010 R040
Model:
V7K17S-1YY-XX V7K17S-2YY-XX V7K17S-3YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311049

Range of wall mounted concealed two and three hole thermostatic shower valves with brass bodies. Incorporating two-way diverter valves. Model (V132-IS-XX) also incorporates a quarter turn ceramic disc headwork. Temperature is controlled independently via a thermostatic cartridge. The products incorporate single check valve cartridges, (however, the complete products have not been fully tested to demonstrate it provides backflow protection). Maximum operating pressure 10.0 bar.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2311049
Expiry date:
30/11/2028
Size:
¾” BSP (F).
Marking:
Samuel Heath on valve nut.
Installation Requirements:
R001 R010 R040
Model:
V111-IS-XX V132-IS-XX Where the product code suffix ‘XX’ denotes the product is unfinished.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311052

Wall mounted spout outlet, (brass body - various finishes) incorporating a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2311052
Expiry date:
30/11/2028
Size:
½” BSP (F)
Marking:
SHS on underside of spout
Installation Requirements:
R001 R040
Model:
V646-XX V646-XX Wall mounted spout Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311053

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener or aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2311053
Expiry date:
30/11/2028
Size:
¾” BSP (F)
Marking:
SHS on underside of operating member or spout.
Installation Requirements:
R001 R010 R040
Model:
V6K17YY-XX V6K47YY-XX Style Moderne V6K17YY-XX, V6K47YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, CCR = Clear Glass Levers. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, CTB = City Bronze.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2311077

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Model V7K33YY-XX incorporates an additional outlet for a side spray connection. Maximum working pressure 3.0 Bar Maximum operating temperature 70.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311077
Expiry date:
30/11/2028
Note:
V7K33YY-XX is not supplied with a hose or a hand spray outlet.
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on body
Installation Requirements:
R001 R009 R090
Model:
V7K32YY-XX V7K33YY-XX Models: Landmark V7K32YY-XX, V7K33YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2402702

Range of deck mounted flow control valves (brass bodies - various finishes) incorporating a quarter turn ceramic disc headwork with either a single lever (V7K42-L models) or cross top (V7K42-X models) operating member. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2402702
Expiry date:
28/02/2029
Size:
¾” BSP M
Marking:
SHS on underside of operating member.
Installation Requirements:
R001
Model:
V7K42-LF-XX V7K42-XF-XX V7K42-LK-XX V7K42-XK-XX V7K42-LW-XX V7K42-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval


#2402703

Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2402703
Expiry date:
28/02/2029
Size:
¾” BSP (M)
Marking:
Samuel Heath on base of spout
Installation Requirements:
R001 R006 R010
Model:
V7K44-1YY-XX V7K44-2YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Lathe Lever, LW = Lathe Wheel. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Factor:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
info@samuel-heath.com

View All Listings by this Company

Print This Approval


#2312061

Range of bidet handsets (brass bodies, various finishes) with self-closing trigger mechanisms. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Inlet hoses are not supplied with products. Maximum working pressure: 5 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2312061
Expiry date:
31/12/2028
Size:
½” BSP (M).
Marking:
SHS on body.
Installation Requirements:
R001 R070 R415
Model:
V766F-SPRHO-XX, V766K-SPRHO-XX. Where XX denotes the surface finish, and it will always be either 2 or 3 digits which can be any combination of numbers and/or letters, as examples: CP = Chrome, URM = Urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2312062

Bidet handset (brass body, various finishes) with self-closing trigger mechanism and shower hose assembly. Inlets incorporate flow limiters and stainless-steel filters in the head of the handsets. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2312062
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
SHS on handset .SHS, WRAS & Year of Manufacture (YYYY) on conical nut
Installation Requirements:
R001 R070 R415
Model:
T2066W-SPR-XX. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240102035

Floor mounted, spout outlet, (brass body- various finishes) incorporating a plastic flow straightener. Maximum working pressure 65.0 Bar

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
240102035
Expiry date:
31/01/2029
Note:
Open outlet use only
Size:
1/2" BSP (F) inlets on installation kit
Marking:
Samuel Heath logo, flow rate and ASME A112.18.1/CSA standard on faceplate. Samuel Heath logo on body of rough kit.
Installation Requirements:
R001 R010 R040
Model:
V141-SP-XX For_me Freestanding Bath Spout V141-IS-XX For_me Installation Kit V141-SP-XX:- Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered. V141-IS-XX:- Where the product code suffix ‘xx’ denotes the product is unfinished.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240102036

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating a ceramic cartridge headwork with and a dome type operating member. The spout outlets incorporate plastic aerators. Model V208 is supplied with a lever operated pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240102036
Expiry date:
31/01/2029
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided, PE-X lined flexible hose assemblies with 1/2" BSP (F) captive nut end connectors.
Marking:
Samuel Heath on body.
Installation Requirements:
R010 R006 R009 R010
Model:
V208-XX (with Pop Up Waste) V210-XX (without Pop Up Waste) Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and /or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240602002

Range of floor mounted (fixed) combination tap assemblies, (brass bodies – various finishes) incorporating ceramic cartridge headworks (various operating members – see models) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure; 5 Bar Maximum operating temperature 85°C

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240602002
Expiry date:
28/02/2029
Note:
Product to be used with V736-IS-XX installation kit, however, it is not approved in its own right. The products are not supplied with a shower hose or handset.
Size:
½” BSP (F)
Marking:
Samuel Heath on front of body
Installation Requirements:
R001 R030
Model:
V7K36-YY-XX Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: LL = Ceramic Levers, or LK = Industrial Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240402047

Single hole, single outlet (fixed) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a ‘lever type’ pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240402047
Expiry date:
30/04/2029
Size:
Stainless steel PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
SHS on underside of operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
V6K09YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240402052

Single hole, single outlet (fixed) over the rim swivel nozzle bidet combination tap assembly (brass body - various finishes) with a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
240402052
Expiry date:
30/04/2029
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP Captive nut end connections.
Marking:
SHS logo on underside of operating member
Installation Requirements:
R001 R006 R009 R010
Model:
V6K19-YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, MB = Metal Levers Black. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, CTB = City Bronze.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#240502024

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Model (V108-XX) is supplied with a lever operated pop-up waste. Maximum working pressure: 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
240502024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Expiry date:
31/05/2029
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut end connections.
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R006 R009 R010
Model:
V108-XX V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.