Range of shower outlets with chromium plated brass bodies and EPDM O-rings. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C
Range of UPVC shower hoses with silicone ‘O’-rings and washers available in lengths of 1250mm to 2000mm. Maximum operating temperature 60°C
Overhead shower outlet having an 8” chrome plated plastic body. Maximum operating temperature 60°C.
Range of electric open outlet instantaneous showers, incorporating a solenoid valve to control the flow and a removable plastic strainer after the main inlet. Products are supplied with a shower hose and handset. Maximum supply pressure 1.0 bar. Maximum operating temperature 45°C.
Range of exposed and concealed thermostatic blending valves (brass bodies) incorporating a single sequential headwork controlling both flow and temperature. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Model 1.0.409.48.1 is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of shower arms (brass bodies - various finishes) incorporating a diverter which diverts flow between an overhead shower outlet to shower hand set. The hand shower outlet incorporates a single check valve (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). Maximum operating temperature 60°C
Single hole, single outlet (swivel) combination tap assembly (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 4.1 bar. Maximum operating temperature 60°C
Range of wall mounted, concealed thermostatic shower control valves. The concealed bodies are brass with a chromium plated trim set. Flow and temperature are controlled by a sequential cartridge headwork with various operating members. The inlets incorporate stainless steel strainers & flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted thermostatic shower valves (chromium plated brass) (concealed or exposed) with a thermostatic cartridge sequential headwork controlling both flow and temperature via a dome type operating member. Inlets incorporate plastic flow regulators. Model 1.1651.008 is supplied with overhead shower outlet. Maximum working pressure 5 bar. Maximum operating temperature 60°C
Three hole, single outlet (fixed) combination tap assemblies (chromium plated or brushed nickel finish) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the products are supplied with pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Kohler mastershower 60’ shower hose having a PVC liner and interlocked stainless steel outler. Open outlet use only. Maximum operating temperature 85°C
Rada electronically controlled thermostatic blending valve. With a stainless steel body, EPDM ‘o’ rings and seals. Maximum working pressure 13.8 bar. Maximum operating temperature 85°C
Range of shower handsets having plastic bodies (in various finishes). Inlets incorporate a combined plastic flow regulator and single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only
Floor mounted single hole, single outlet (fixed) combination tap assembly (in various finishes) Incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted bath spout with a brass body, available in different various finishes. The outlet incorporates a flow straightener. Maximum operating temperature 60°C
Three hole, single outlet (fixed) combination tap assembly (in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the headworks via grey stainless steel braided EPDM hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator and is connected to the side valves via stainless steel braided EPDM lined flexible hoses assemblies. The spout outlet. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (fixed) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. The 77959W-4A-** model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly with a brass body (in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page 1 of 7
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.