Grohe AG Approvals


#2311342

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311342
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP (31.687) or 3/8” BSP (all other models) captive nut end connections.
Marking:
Grohe on Operating Member
Installation Requirements:
R001 R006 R009 R010
Model:
31.680 - BAUECO, 31.685 - STARTECO, 31.686 - STARTECO, 31.687 - STARTECO.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311357

Self-closing basin tap (chromium plated brass), incorporating a self-closing headwork with dome type operating memeber. Temperature is controlled independently by a manual lever. Spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete assembly has not been tested to demonstrate backflow protection.. Maximum working pressure 10.0 bar.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2311357
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connectors.
Marking:
Grohe Logo etched on body
Installation Requirements:
R001 R006 R009 R010
Model:
36.317 - EUROSMART CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311358

Range of four hole, single outlet (fixed) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet, with stainless steel braided silicone lined flexible interconnecting hoses. The connection to shower outlet incorporates a single check valve, verified by test (suitable for backflow prevention against Fluid Category 2). The spout outlet incorporates a plastic aerator. The product is also supplied with a shower hose and handset. Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2311358
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2” captive nut end connections.
Marking:
Grohe logo on spout body.
Installation Requirements:
R001 R007 R009 R030
Model:
19.578.XX1 - ESSENCE. XX1 indicates different available coloured finishes: 001 = chrome, DC1 = supersteel, GN1 = brushed cool sunrise, GL1 = cool sunrise, EN1 = brushed nickel, DL1 = brushed warm sunset, DA1 = warm sunset, BE1 = polished nickel, AL1 = brushed hard graphite, A01 = hard graphite.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311359

Self-closing shower mixer (chromium plated brass) incorporating spring loaded non-concussive headworks with dome type operating member. Temperature is adjusted manually with a dome type operating member. Both inlets and the shower outlet incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection). The inlets also incorporate a stainless steel strainer. Shower hose, handset or headset are not supplied supplied with this product. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2311359
Expiry date:
30/11/2028
Size:
1/2” BSP (M) x ¾” BPS (M) offset unions.
Marking:
Grohe logo on front body.
Installation Requirements:
R001 R010 R040
Model:
36.320 - Eurosmart CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311360

Self-closing concealed shower valve assembly with (DZR) brass body incorporating a non-concussive headwork and dome type operating member (chromium plated brass). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2311360
Expiry date:
30/11/2028
Size:
½ BSP (F).
Marking:
Grohe logo on operating member, flow arrow and DR on body.
Installation Requirements:
R001 R040
Model:
36.268 EUROECO CT.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2311361

Wall mounted, self-closing shower valve assembly (chromium plated brass) with non-concussive headwork and dome type operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2311361
Expiry date:
30/11/2028
Size:
½ BSP (M).
Marking:
Grohe logo on operating member.
Installation Requirements:
R001 R040
Model:
36.267 - EUROECO COSMOPOLITAN
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2312327

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with a lever type pop-up waste. Maximum working pressure: 10 Bar. Maximum operating temperature: 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
2312327
Expiry date:
31/12/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Model:
32 108 al3, 32 108 003, 32 108 dc3.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2312348

Wall mounted, two-hole, single outlet, (fixed), combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a joy stick type operating member. The product incorporates a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic flow straightener. The shower outlet incorporates an approved check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0503 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self cancelling diverter to shower.
WRAS Approval Number:
2312348
Expiry date:
31/12/2028
Size:
½” BSP (M) x ¾” BSP (M) offset union
Marking:
Grohe on top and rear of body
Installation Requirements:
R001 R030
Model:
23.666 - Eurocube Joy
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2312350

Wall mounted, manually operated shower mixer valve (chromium plated brass body), incorporating a ceramic cartridge with a joystick type operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2312350
Expiry date:
31/12/2028
Note:
This product is not supplied with a hose or handset.
Size:
½” BSP (M) x ¾” BSP (M) offset union
Marking:
Grohe on body
Installation Requirements:
R001 R010 R040
Model:
23.665 - EUROCUBE JOY
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240102705

Filter cartridge with plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1055 Filter Cartridges
WRAS Approval Number:
240102705
Expiry date:
31/01/2029
Size:
74mm OD 3.5 ISO Grohe thread.
Marking:
BWT, Grohe and flow arrow on body
Installation Requirements:
R001 R008 R120 R150 R170 R290
Model:
40691002 Grohe Blue Magnesium+Zinc
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240204708

Ceiling mounted multispray rain shower outlet. Open outlet. Max operating Temperature 60 °C

Section:
1650 Shower Outlets
WRAS Approval Number:
240204708
Expiry date:
28/02/2029
Size:
Stainless steel braided, PEX lined hoses ½” BSP (F) Stainless steel braided, PEX lined hoses 3/8” BSP (F)
Marking:
Grohe on body.
Installation Requirements:
R001 R009 R040
Model:
27939001 RSH F-Series 15” multispray shower
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240202040

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass body, various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
240202040
Expiry date:
28/02/2029
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” captive nut end connections.
Marking:
23.117.xxx - Grohe logo on body. 24.347.xxx – Grohe Spa logo on body.
Installation Requirements:
R001 R006 R009 R010
Model:
23.117.XXX, 24.347.XXX. XXX denotes finish: 000 – Chrome, DC0 – Super Steel, AL0 – Brushed Hard Graphite.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240204053

Range of angle valves (brass bodies – various finishes), incorporating non-rising spindle headworks with a dome type operating members and NBR O-rings and PTFE Seals. Maximum working pressure 10 bar. Maximum operating temperature – Cold Water Use

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240204053
Expiry date:
28/02/2029
Size:
½” BSP (M) x 10mm Compression ½” BSP (M) x ½” BSP (M)
Marking:
Grohe on Valve Body
Installation Requirements:
R001 R040
Model:
22.046.XXX - ½’’ x ½’’ 22.045.XXX - ½” x 3/8” 22.043.XXX - ½’’ x ½’’ 22.041.XXX - ½’’ x ½’’ 22.039.XXX - ½” x 3/8” 22.037.XXX - ½” x 3/8” 22.032.XXX - ½’’ x ½’’ 22.031.XXX - ½’’ x ½’’ 22.029.XXX - ½” x 3/8” 22.073.2430 - ½” x 3/8” 22.074.XXX - ½” x 3/8” XXX denotes different available finishes like 000 = chrome DL0 = brushed warm sunset AL0 = brushed hard graphite KF0 = phantom black
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2312349

Range of wall mounted, concealed, bath-shower mixer valves (brass bodies, chromium plated trim sets) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to two outlets. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2312349
Expiry date:
31/12/2028
Size:
½” BSP (F)
Marking:
Grohe on operating member
Installation Requirements:
R001 R010 R040
Model:
29.081.001 - BAULOOP
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240402021

Wall mounted, concealed, three-hole, single outlet combination tap assembly (brass body - various finishes). The product incorporates quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
240402021
Expiry date:
30/04/2029
Size:
20.589.XXX is specifically for use with 29.025.002 which has ½” BSP (F) inlets.
Marking:
GROHE SPA on spout.
Installation Requirements:
R001 R010 R040
Model:
20.589. XXX. Installation set = 29.025.002. Where XXX denotes finish, which can be replaced by the following: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#240404022

Range of two hole, single outlet (fixed) wall mounted combination tap assemblies (chromium plated brass spout) incorporating a ceramic cartridge headwork with a joystick operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
240404022
Expiry date:
30/04/2029
Size:
½” BSP (F).
Marking:
Spout Etched Grohe.
Installation Requirements:
R001 R010 R040
Model:
19 968 000 2 Hole Basin Mixer, 19 969 000 2 Hole Basin Mixer. To be installed in conjunction with the concealed body (rough-in kit): 23 429 000.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2309326

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a plastic flow straightener and supplied with a flow regulator. Model 23.112 is supplied with a lever type pop-up waste (not tested). Maximum working pressure 10 bar. Maximum working temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309326
Expiry date:
30/09/2028
Note:
Claims of flow rate made by the manufacture on flow rate are not part of this approval.
Size:
Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Model:
Allure Brilliant ½” L-Size Range: 23.109.xxx - including pop-up waste set, 23.112.xxx – without pop-up waste set. XXX defines different available coloured finishes. 000 = chrome DC0 = supersteel AL0 = Brushed Hard Graphite A00 = Hard Graphite
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Phone
02372 930

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.