Water Regulations Approval Scheme Ltd

Pumps

Section Code 1610 : Wholesome water use.

WRAS Approval Number: #2105028

Range of pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Single versions are standalone pumps, twin versions also include stainless steel manifolds. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105028
Expiry date:: 31/05/2026
Size:: 1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:: Pedrollo on body. Model, PN, max temp, date of manufacture within serial number (DGP YY MM x xxx) and other technical info on adhesive label on body.
Installation Requirements:: R001 R415
Model:: Single pump booster set: DGPED 3 (Pedrollo) DGPED 5 (Pedrollo) Twin pump booster set with manifold: Gruppo 2DGPED 33 (Pedrollo) Gruppo 2DGPED 35 (Pedrollo) Gruppo 2DGPED 55 (Pedrollo) DGPED 3 = single pump, size 3 m³/h (50l/min). DGPED 5 = single pump, size 5 m³/h (83.33l/min). 2DGPED 33 = 2 pumps booster, size 3 m³/h (50l/min) for each pump. 2DGPED 35 = 2 pumps booster, size 3 m³/h (50l/min) for one pump, size 5 m³/h (83.33l/min) for the other pump. 2DGPED 55 = 2 pumps booster, size 5 m³/h (83.33l/min) for each pump.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2104008

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104008
Expiry date:: 30/04/2026
Size:: EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)
Marking:: Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.
Installation Requirements:: R001 R415
Model:: Horizontal/Self-Priming Multi-Stage Pumps: EH 3/XX A KKK MM EN B C D. EH 5/XX A KKK MM EN B C D. EH 9/XX A KKK MM EN B C D. EH 15/XX A KKK MM EN B C D. EH 20/XX A KKK MM EN B C D. EHsp 3/XX A KKK MM EN B C D. EHsp 5/XX A KKK MM EN B C D. Where: EH = Standard model. EHsp = Self-priming model. 3/5/9/15/20 = rated power [m³/h]. XX = no. of stages (50 Hz single phase): 2 to 9 for EH 3 & 5; 2 to 6 for EH 9; 2 to 3 for EH 15; 2 for EH 20; 4 & 5 stages for EHsp 3 & 5. (50 Hz three phase): 2 to 9 for EH 3 & 5; 2 to 8 for EH 9; 2 to 7 for EH 15; 2 to 5 for EH 20; 4 & 5 stages for EHsp 3 & 5. (60 Hz single phase): 2 to 7 for EH 3; 2 to 5 for EH 5; 2 to 3 for EH 9; 3 to 5 for EHsp 3 & 5. (60 Hz three phase): 2 to 7 for EH 3 & 5; 2 to 5 for EH 9; 2 to 4 for EH 15; 2 to 3 for EH 20; 3 to 5 for EHsp 3 & 5. A = Pump material: “I” for AISI 304 (All the versions) and “N” for AISI 316 (not available for “EHsp” versions). KKK = Motor power (kW x 10). MM = motor connection and frequency as follows: M5 = single phase and 50Hz T5 = three phase and 50Hz M6 = single phase and 60Hz T6 = three phase and 60Hz EN = Type of mechanical seal: E0 or E1 or E2 for EH 3/5/9 models. E1 or E2 for EH 15/20 models. E0 for EHsp models. B = “No load” - standard version, D - sealing disc with plug. C = “No load” - standard version, A - cable with plug, S = without condensate drain plugs. D = motor efficiency class.
Factor:: Franklin Electric SRL

Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366
General Email
info.it@fele.com

View All Listings by this Company

WRAS Approval Number: #2105014

Range of self-priming pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105014
Expiry date:: 31/05/2026
Size:: 1” BSP (F) inlet/outlet.
Marking:: Plurijet and logo on body. PEDROLLO, Plurijet. CE, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Plurijetm 3/80, Plurijetm 4/80, Plurijetm 3/100, Plurijetm 4/100, Plurijet 3/80, Plurijet 4/80, Plurijet 3/100, Plurijet 4/100.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2104914

Range of single stage end suction pumps with stainless steel or cast iron pump housings, EPDM ‘O’-rings and wear rings available in low-lead bronze/brass or stainless steel. Cast iron models are coated in black cathodic paint (textured finish) or black epoxy (smooth finish). The pumps are available with carbon graphite/silicon carbide mechanical shaft seal. Impellors are available in cast iron with black cathodic paint, low-lead bronze or stainless steel. The pumps are available with fixed flange, as well as loose flange (model dependent). Maximum working pressure 10.0 or 16.0 bar depending on model. Maximum operating temperatures: Stainless steel and cast iron with (smooth) epoxy coating pumps 85°C. Cast iron pumps with (textured) cathodic paint coating are cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104914
Expiry date:: 30/04/2026
Size:: Nominal ø of suction port sizes (DN): 50, 65, 80, 100, 125, 150, 200, 250, 300, 350. Nominal ø of discharge port (DN): 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,300
Marking:: Grundfos on body. Model, Pressure Max, Temperature Max, Made in Hungary and Grundfos logo on data plate.
Installation Requirements:: R001 R415
Model:: NB, NBE, NBG, NBGE, NK, NKE, NKG, NKGE. NB, NBE, NBG, NBGE Example codes: NBE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NBG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. NK, NKE, NKG, NKGE Example codes: NKE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NKG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. Where: NBE, NBG, NKE or NKG is the type range. It can also be NB, NBGE, NK or NKGE. NB, NBG, NK, NKG: Pump with standard motor. NBE, NBGE, NKE, NKGE: Pump with MGE motor. _ Nominal diameter (mm) of inlet port (DN) - not displayed on NB/NBE/NK/NKE models. For NBG/NBGE/NKG/NKGE models the value will be between 50 & 350. 32 = Nominal diameter (mm) of outlet port (DN). Value between 32 & 300. 125 = Nominal impeller diameter [mm] (dimension varies). .1 = Reduced performance. 142 = Actual impeller diameter [mm] (dimension varies). Sensor version S1 Without factory-fitted sensor, pressure sensor is supplied with the pump. S2 With factory-fitted differential-pressure sensor, Series 2000. X1: Letter or multiple letters for pump version. Pipe connection F: DIN flange. Flange pressure rating (PN - nominal pressure) 1 = 10 bar. 2 = 16 bar. X2: Materials - Pump housing/Impeller/Wear ring/Shaft denoted by a single letter. Rubber parts in pump The letter indicates material of O-ring for pump cover E: EPDM. Shaft seal arrangement S: Single seal. Code for mechanical shaft seal and shaft seal rubber parts BBQE or BQQE.
Factor:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

WRAS Approval Number: #2105303

Centrifugal pump with a stainless steel casing and shaft, silicon carbide and EPDM shaft seals, NBR ‘O’-rings and washers. Maximum working pressure 8.0 bar. Maximum operating temperature 45°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105303
Expiry date:: 31/05/2026
Size:: DN100
Marking:: Whale Enterprise, model, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Molex Aqua 220
Factor:: Whale Tankers Ltd

Company Name
Whale Tankers Ltd
Address
Ravenshaw Solihull West Midlands
Postcode
B91 2SU
Country
United Kingdom
Phone
0121 704 5700
General Email
whalemail@whale.co.uk

View All Listings by this Company
Manufacturer:: whale Enterprise Pvt Ltd

Company Name
whale Enterprise Pvt Ltd
Address
1/1D Vilankurichi Road Near Senthottam Kalapatti Coimbatore 641 048 Tamilnadu
Country
India
General Email

View All Listings by this Company

WRAS Approval Number: #2106807

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2106807
Expiry date:: 30/06/2026
Size:: Please refer to model.
Marking:: Circulating Pumps, CE, Model, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.
Installation Requirements:: R001
Model:: SE20B - 1½” BSP (M). SE60B- 1½” BSP (M).
Factor:: Circulating Pumps Ltd

Company Name
Circulating Pumps Ltd
Address
21 Tuesday Market Place, Kings Lynn, Norfolk
Postcode
PE30 1JW

View All Listings by this Company

WRAS Approval Number: #2106012

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2106012
Expiry date:: 30/06/2026
Size:: 1” BSP (F) inlet/outlet
Marking:: Pedrollo, model number, max. temp and other technical information on data plate on body
Installation Requirements:: R001 R415
Model:: Single phase models: JCRm 1C, JCRm 1B, JCRm 1A, JCRm 2C, JCRm 2CL, JCRm 2B, JCRm 2A. Three phase models: JCR 1C, JCR 1B, JCR 1A, JCR 2C, JCR 2CL, JCR 2B, JCR 2A.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2106013

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2106013
Expiry date:: 30/06/2026
Size:: 1” BSP (F)
Marking:: PEDROLLO logo on body. PEDROLLO, CE, model number, maximum temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Single phase models: 2CRm 80, 3CRm 80, 4CRm 80, 5CRm 80, 3CRm 100, 4CRm 100, 5CRm 100. Three phase models: 2CR 80, 3CR 80, 4CR 80, 5CR 80, 3CR 100, 4CR 100, 5CR 100.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2102706

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve and EPDM 'O'-rings and seals. The pumps incorporate a ceramic/carbon graphite/EPDM and stainless steel mechanical shaft seal (QBEGG). Maximum working pressures: 1-22SV models: 1SV27-1SV37 (F VERSION) - PN16 (25mm). 3SV23-3SV33 (F VERSION) - PN16 (25mm). 5SV23-5SV33 (F VERSION) - PN16 (32mm). 10SV27-10SV21 (F VERSION) - PN16 (40mm). 15SV11-15SV17 (F VERSION) - PN16 (50mm). 22SV12-22SV17 (F VERSION) - PN16 (50mm). 1SV02-1SV25 (F VERSION) - PN25 (25mm). 3SV02-3SV21 (F VERSION) - PN25 (25mm). 5SV02-5SV16 (F VERSION) - PN25 (32mm). 10SV01-10SV13 (F VERSION) - PN25 (40mm). 15SV01-15SV10 (F VERSION) - PN25 (50mm). 22SV01-22SV10 (F VERSION) - PN25 (50mm). N VERSIONS ALL MODELS - PN25 (25-50mm). R VERSION ALL MODELS - PN25 (25-50mm). T VERSION ALL MODELS - PN16 (25-50mm). 33-125SV models: 33SV1-33SV5, 33SV6/2AG150T/D & 33SV6/2AN150T/D (G or N VERSION) - PN16 (65mm). 46SV1-46SV5 (G or N VERSION) - PN16 (80mm). 66SV1-66SV5 (G or N VERSION) - PN16 (100mm). 92SV1-92SV4 (G or N VERSION) - PN16 (100mm). 125SV1-125SV6 (G VERSION) - PN16 (125mm). 33SV7-33SV10, 33SV6/1AG150T/D, 33SV6/1AN150T/D, 33SV6G150T/D & 33SV6N150T/D (G VERSION) - PN25, (N VERSION) - PN16 (65mm). 46SV6-46SV9 (G VERSION) - PN25, (N VERSION) - PN16 (80mm). 66SV6-66SV8 (G VERSION) - PN25, (N VERSION) - PN16 (100mm). 92SV5-92SV7 (G VERSION) - PN25, (N VERSION) - PN16 (100mm). 125SV7-125SV8 (G VERSION) - PN25 (125mm). 33SV10-33SV13 (G VERSION) - PN40 (65mm). 46SV10-46SV13 (G VERSION) - PN40 (80mm). Cold water use only. VERSION) - PN25 (100mm). 92SV5-92SV7 (G or N VERSION) - PN25 (100mm). 125SV7-125SV8 (G or N VERSION) - PN25 (125mm). 33SV10-33SV13 (G VERSION) - PN40 (65mm). 46SV10-46SV13 (G VERSION) - PN40 (80mm). Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2102706
Expiry date:: 28/02/2026
Size:: Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.
Marking:: LOWARA (brand of Xylem), PN and technical info on data plate or label on body. WRAS approved product (cold water use only) and LOWARA on adhesive labels on body.
Installation Requirements:: R001 R415
Model:: 1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.
Factor:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Lombardi 14, 36075 Montecchio Maggiore VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company
Manufacturer:: Xylem Service Italia S.r.l, Xylem Water Solutions UK Limited, LOWARA VOGEL POLSKA SP.Z.O.O., Lowara Unipersonale srl, Goulds Water Technology, Xylem Water Systems International Inc Philippines.

Company Name
Xylem Service Italia S.r.l, Xylem Water Solutions UK Limited, LOWARA VOGEL POLSKA SP.Z.O.O., Lowara Unipersonale srl, Goulds Water Technology, Xylem Water Systems International Inc Philippines.
Address
Xylem Service Italia S.r.l, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy Xylem Water Solutions UK Limited, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy LOWARA VOGEL POLSKA SP.Z.O.O., PL 57-100 Strzelin Ul. Kazimierza Wielkiego 5 Poland. Lowara Unipersonale srl, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy Goulds Water Technology, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy No. 12 Ring Road, LISP II, Calamba City 4027, Laguna, Philippines.

View All Listings by this Company

WRAS Approval Number: #1910363

Range of booster sets consisting of two to four electronically controlled pumps which are connected in parallel and mounted on a common base provided with suction and discharge manifolds, spherical valves, expansion vessels and pressure gauge/transducers and non return valves. Cold water use only. Maximum working pressure 10 bar where the MTPA vessel is installed. 16 bar where the MTMB vessel is used.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 1910363
Expiry date:: 31/10/2024
Size:: VC 2H & VC 2V– 2” BSP(M) inlet x 1 ½” BSP(M) outlet VC 3H & VC 3V– 2 ½” BSP(M) inlet x 1 ½” BSP(M) outlet VC 4H & VC 4V 3” BSP(M) inlet x 1 ½” BSP(M) outlet
Marking:: Mikrofill, Model, year of manufacture YYYY, serial number and manufacturers name on adhesive label on control panel
Installation Requirements:: R001 R415
Model:: COLD WATER BOOSTER SETS SERIES VC 2H, VC 3H, VC 4H (HORIZONTAL PUMP VERSION) & COLD WATER BOOSTER SETS SERIES VC 2V, VC 3V & VC 4V (VERTICAL PUMP VERSION) WHOLESOME WATER PUMPS Where the following codes can be applied: A = Number of Pumps (2,3 or 4 pumps) V = Variable Speed B = Pump Model (Horizontal or Vertical) C = Controller type (MAB-MARB) D = Power input (T = 3 Phase – M = 1Phase) E = Vessel Capacity (24= 1 of 24 litre Vessel), (48= 2 of 24 litre Vessels), (72= 3 of 24 litre Vessels), (96= 4 of 24 litre Vessels) Example: SP2V-5HM06S-MAB-T/24 SP = Product Range Name A = 2 Pumps V = Variable Speed B = 5HM06S C = MAB D = T – 3 Phase E = Vessel Capacity 24L
Factor:: Mikrofill Systems Ltd.

Company Name
Mikrofill Systems Ltd.
Address
West Court, 11 Merse Road, Redditch
Postcode
B98 9HL
Country
Worcs.
Phone
+44 (0) 8452 606 020
General Email
info@mikrofill.com

View All Listings by this Company

WRAS Approval Number: #2107073

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2107073
Expiry date:: 31/07/2026
Size:: 1 ¼” BSP (F).
Marking:: Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Model:: Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.
Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #2107031

Centrifugal pump with a plastic body, plastic impellers and NBR ‘O’-rings. The product includes an (integral) expansion vessel and the inlet incorporates a non-return valve (not suitable for backflow protection). Maximum working pressure 4.5 bar. Maximum operating temperature 50°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2107031
Expiry date:: 31/07/2026
Size:: 1” BSP (F)
Marking:: LEO on control face. Leo Group Pump(Zhejiang) Co.,Ltd logo ‘LEO’, CE, model number, maximum temperature and other technical info on data plate on body.
Installation Requirements:: R001 R415
Model:: MAC550
Manufacturer:: Leo Group Pump(Zhejiang) Co.,Ltd

Company Name
Leo Group Pump(Zhejiang) Co.,Ltd
Address
No.1, 3rd street, East industry Center,Wenling, Zhejiang

View All Listings by this Company

WRAS Approval Number: #2105052

Single pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105052
Expiry date:: 31/05/2026
Size:: 1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:: wilo on body. Wilo, Model, WRAS, PN & max temp
Installation Requirements:: R001 R415
Model:: SINGLE PUMP BOOSTER SET: Isar BOOST5-E-3 (WILO) & Isar BOOST5-E-3-G (WILO)- single pump, size 3 m³/h (50l/min). SINGLE PUMP BOOSTER SET: Isar BOOST5-E-5 (WILO) & Isar BOOST5-E-5-G (WILO) -single pump, size 5 m³/h (83.33l/min).
Factor:: Wilo SE.

Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2109036

Range of multistage pumps incorporating a stainless-steel housing and impellers. Model MHS170 6M has a maximum working pressure of 7.5 bar. Model MHB145 5M has a maximum working pressure of 6.2 bar. Maximum operating temperature 65˚C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2109036
Expiry date:: 30/09/2026
Size:: Please refer to model.
Marking:: WENDY, model and other product information on junction box.
Installation Requirements:: R001 R415
Model:: MHB145 5M: 1” BSP (F) inlet x 1¼” BSP (F) outlet. MHS170 6M: 1¼” BSP (F) inlet x 1¼” BSP (F) outlet.
Manufacturer:: Fujian Fuan Wendy Electrical Machinery Co Ltd

Company Name
Fujian Fuan Wendy Electrical Machinery Co Ltd
Address
Qinxiyang Industrial Zone Fuan Fujian
Country
China

View All Listings by this Company

WRAS Approval Number: #2110050

“Silent” range of booster pumps with plastic bodies and impellers and NBR ‘O’-rings. The SM900165A & SM600165A models incorporate a non-return valve on the outlet. Maximum working pressure 3.2 bar. Maximum operating temperature 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110050
Expiry date:: 31/10/2026
Size:: 1” BSP (F) inlet/outlet.
Marking:: TORNEE B.V.B.A, model number and product information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: “Silent range Booster Pump”: SM900165. SM600165. SM900165A. SM600165A.
Factor:: Tornee B.V.B.A

Company Name
Tornee B.V.B.A
Address
Broomansakker 1 Bus 3001 2930 BRASSCHAAT
Country
Belgium

View All Listings by this Company
Manufacturer:: Junhe Pumps Holding Co.,Ltd

Company Name
Junhe Pumps Holding Co.,Ltd
Address

View All Listings by this Company

WRAS Approval Number: #2110329

‘Para Z’ range of circulating pumps with either stainless steel, bronze or plastic bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110329
Expiry date:: 31/10/2026
Size:: ¾”, 1”, 1¼” & 1½” BSP (M)
Marking:: Wilo, model and other technical information on pump face. Flow arrow on body,
Installation Requirements:: R001
Model:: ‘Para Z’ range comprising of models: KU 12/4-20. KU 12/6-43. KU 12/7-50. KU 12/8-75. KU 15-/4-20. KU 15/6-43. KU 15/7-50. KU 15/8-75. BZ 25/4-20. BZ 25/6-43. BZ 25/7-50. BZ 25/8-75. BZ 15/4-20. BZ 15/6-43. BZ 15/7-50. BZ 15/8-75. N 20/4-20. N 20/6-43. N 20/7-50. N 20/8-75. N 25/4-20. N 25/6-43. N 25/7-50. N 25/8-75.
Manufacturer:: Wilo Intec

Company Name
Wilo Intec
Address
50 Avenue Eugene Casella, 18700 Aubigny Sur Nere, France
Phone
+332 48 81 62 62

View All Listings by this Company

WRAS Approval Number: #2110004

‘e-SH’ range of centrifugal booster pumps with a blue polymer coated stainless steel body, stainless steel impeller and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110004
Expiry date:: 31/10/2026
Size:: DN50-100 flanged inlets. DN25-80 flanged outlets.
Marking:: LOWARA (brand of Xylem), CE, maximum temperature and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: e-SH range of pumps Example model code: ESHF 65-160/110A/P25VSNB ESH = Pump series F = Coupling type (blank - bare shaft, E - extended shaft, S - Stub shaft, F - Frame mounted or C - spacer coupling frame mounted). [ ] = motor operation (blank [ ] = standard asynchronous motor, [H] = equipped with Hydrovar, [X] = other drives). 65 = discharge port diameter mm (ranges from DN25-80). 160 = impeller diameter mm (ranges from 125-250). 110 = Motor power (2-3 digits - kW x 10 or D + actual impeller diameter (mm) (bare shaft version)). A = Trimmed impeller (blank - not trimmed, A - trimmed diameter that doesn’t maximise motor power type, X - trimmed diameter to meet customer required duty point). P = motor type (/P, /S, /W, /X). 2 = No. of poles (2 or 4). 5V = electrical voltage and frequency (5H, 5R, 5V, 5P, 5S, 5T, 5W, 6F, 6E, 6P, 6R, 6V, 6U, 6N, 6T). S = Casing material (Stainless steel 1.4404). N = Impeller material (S - Fabricated stainless steel 1.4404 or N - Cast stainless steel 1.4408). B = Mechanical seal option: Ceramic/Carbon/EPDM.
Factor:: Xylem Water Solutions UK Ltd

Company Name
Xylem Water Solutions UK Ltd
Address
Private Road 1 Colwick Industrial Estate Colwick
Postcode
NG4 2AN
Country
Nottingham

View All Listings by this Company
Manufacturer:: Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.

Company Name
Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.
Address

View All Listings by this Company

WRAS Approval Number: #2205800

Circulation pump incorporating a plastic body and impellers. Maximum working pressure 15.0 bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2205800
Expiry date:: 31/05/2027
Size:: ZRS12 prefix models: ¾” BSP (M), ZRS15 prefix models: 1” BSP (M).
Marking:: Wilo, date of manufacture (YYWW) & flow arrow on data plate on body.
Installation Requirements:: R001
Model:: ZRS X1/X2-X3 KU X4 130 X5 Where: X1 = connection size: 12 = ¾” BSP (M), 15 = 1” BSP (M). X2 = motor power 2, 4, 5, 6 or 7 (head in mWC). X3 = speed number; 1, 2 or 3. KU = composite pump body. X4 = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130 = pump body dimension (height in mm). X5 = terminal box position: 12, 3, 6 or 9 o’clock. Example: ZRS15/4-3 KU PL 130 12.
Manufacturer:: Wilo Intec

Company Name
Wilo Intec
Address
50 Avenue Eugene Casella, 18700 Aubigny Sur Nere, France
Phone
+332 48 81 62 62

View All Listings by this Company

WRAS Approval Number: #2105321

‘Showermate Universal’ range of booster pumps with plastic bodies and impellers, stainless steel shafts, brass manifolds, NBR ‘O’-rings and EPDM seals. The product incorporates a pressure vessel. The outlet(s) incorporate(s) an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The inlet hose(s) supplied with this product incorporate(s) an isolation valve. Maximum working pressure 4.0 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105321
Expiry date:: 31/05/2026
Note:: IRN R150 applies to both inlets of the Twin models only.
Size:: Stainless-steel braided EPDM lined flexible hoses with 15mm pushfit (inlet and outlets) x ¾” BSP captive nut end connections (to pump).
Marking:: Stuart Turner, model name, part no., serial number including date of manufacture (YYWW000-000, where 000-000 changes numerically to denote serial number) & other technical information on adhesive label on pump body. Showermate on pump body.
Installation Requirements:: R001 R150 R415
Model:: 47375: Showermate U2.6 bar Single. 47376: Showermate U2.0 bar Twin. 47377: Showermate U2.6 bar Twin. 44921: Showermate U2.6 bar Single. 44918: Showermate U2.0 bar Twin. 44922: Showermate U2.6 bar Twin.
Factor:: Stuart Turner Ltd

Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
pumps@stuart-turner.co.uk

View All Listings by this Company

WRAS Approval Number: #2111366

Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2111366
Expiry date:: 30/11/2026
Note:: These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 3 air gap arrangement.
Size:: 1" BSP (M)
Marking:: Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.
Installation Requirements:: R001 R280 R415
Proviso:: If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
Model:: IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap.
Factor:: Stuart Turner Ltd

Company Name
Stuart Turner Ltd
Address
Unit 6 North Point Business Park Selby Road Eggborough East Yorkshire
Postcode
DN14 0JT
Country
United Kingdom
Phone
01977 801911
General Email
aquaboost@stuart-turner.co.uk

View All Listings by this Company