Water Regulations Approval Scheme Ltd

Wilo SE. Approvals

WRAS Approval Number: #1904004

‘TOP-Z’ range of circulating pumps with stainless-steel (TOP-Z 20/4 & TOP-Z 25/6 models) or gunmetal (RG models) bodies, incorporating EPDM rubber ‘O’-rings and PPO impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 1904004
Expiry date:: 30/04/2024
Size:: See model.
Marking:: WILO, model and PN on data plate. Flow arrow on body.
Installation Requirements:: R001 R415
Model:: TOP-Z 20/4 - 1¼” BSP (M) x 1¼” BSP (M). TOP-Z 25/6 - 1½” BSP (M) x 1½” BSP (M). TOP-Z 30/7 (RG) (open cartridge) - 2” BSP (M) x 2” x 2” BSP (M). TOP-Z 25/10 (RG) - 1½” BSP (M) x 1½” BSP (M). TOP-Z 30/10 (RG) - 2” BSP (M) x 2” BSP (M). TOP-Z 40/7 (RG) - DN40 (flanged) x DN40 (flanged). TOP-Z 50/7 (RG) - DN50 (flanged) x DN50 (flanged). TOP-Z 65/10 (RG) - DN65 (flanged) x DN65 (flanged). TOP-Z 80/10 (RG) - DN80 (flanged) x DN80 (flanged).
Factor:: Wilo SE.

Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund

View All Listings by this Company

WRAS Approval Number: #1904007

‘Stratos-Z,’ ‘Stratos PARA Z’ and ‘Yonos MAXO-Z’ ranges of circulating pumps with brass bodies, incorporating EPDM rubber ‘O’-rings and either PPO or PPS impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 1904007
Expiry date:: 30/04/2024
Size:: See Model
Marking:: Company name ‘WILO’ and model on adhesive label on motor housing. Flow arrow on body.
Installation Requirements:: R001
Model:: Stratos-Z 25/1-8 RG - 1½” BSP (M) x 1½” BSP (M). Stratos-Z 30/1-8 RG - 2” BSP (M) x 2” BSP (M). Stratos-Z 30/1-12 RG - 2” BSP (M) x 2” BSP (M). Stratos-Z 40/1-8 RG - DN40 x DN40 flanged. Stratos-Z 40/1-12 RG - DN40 x DN40 flanged. Stratos-Z 50/1-9 RG - DN50 x DN50 flanged. Stratos-Z 65/1-12 RG - DN65 x DN65 flanged. Stratos PARA Z 25/1-8 RG - 1½” BSP (M) x 1½” BSP (M). Stratos PARA Z 25/1-11 RG - 1½” BSP (M) x 1½” BSP (M). Stratos PARA Z 25/1-12 RG - 1½” BSP (M) x 1½” BSP (M). Stratos PARA Z 30/1-8 RG - 2” BSP (M) x 2” BSP (M). Stratos PARA Z 30/1-11 RG - 2” BSP (M) x 2” BSP (M). Stratos PARA Z 30/1-12 RG - 2” BSP (M) x 2” BSP (M). Yonos MAXO-Z 25/0.5-7 RG - 1½” BSP (M) x 1½” BSP (M). Yonos MAXO-Z 25/0.5-10 RG - 1½” BSP (M) x 1½”” BSP (M). Yonos MAXO-Z 30/0.5-7 RG - 2” BSP (M) x 2” BSP (M). Yonos MAXO-Z 30/0.5-12 RG - 2” BSP (M) x 2” BSP (M). Yonos MAXO-Z 40/0.5-8 RG - DN40 x DN40 flanged. Yonos MAXO-Z 40/0.5-12 RG - DN40 x DN40 flanged. Yonos MAXO-Z 50/0.5-8 RG - DN50 x DN50 flanged. Yonos MAXO-Z 65/0.5-12 RG - DN65 x DN65 flanged.
Factor:: Wilo SE.

Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund

View All Listings by this Company

WRAS Approval Number: #2004352

Range of multistage horizontal water pumps with stainless steel bodies and impellers incorporating EPDM ‘O’-rings and seals. With various nominal flow rates depending on number of impellers and inlet connection size. Maximum working pressure 10.0 bar. Cold Water Use Only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2004352
Expiry date:: 30/04/2025
Note:: Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:: 1” BSP (F) suction x 1 1/4” BSP (F) delivery with 2 (m³/h) impeller(s) and 2-7 stages. 1” BSP (F) suction x 1” BSP (F) delivery with 4 (m³/h) impeller(s) and 2-7 stages. 1¼” BSP (F) suction x 1” BSP (F) delivery with 6 (m³/h) impeller(s) and 2-5 stages. 1½” BSP (F) suction x 1¼” BSP (F) delivery with 10 (m³/h) impeller(s) and 2-5 stages. Size added March 2021: 2” BSP (F) suction x 1 1/2” BSP (F) delivery with 16 (m³/h) impeller(s) and 2-5 stages.
Marking:: WILO, data label, model and other technical information on body.
Installation Requirements:: R001 R415
Model:: MEDANA CH1-L range: Model code example: MEDANA CHl-L.1002-1/E/A/10T Where: MEDANA CH1-L. = Multistage, non self-priming, Horizontal high-pressure centrifugal pump in off-line design with glandless pump motor 10 = Nominal flow (m3/h) (other possible values are 2,4 and 6) 02 = Number of impellers (other possible values see table above - stages) -1 = pump body material: stainless steel AISI 304 (other possible value is: -2 stainless steel AISI 316L) /E = EPDM material for O'ring and bellows /A = Motor definition: Three phases 400 Volts-SO HZ 2 poles (other possible values are B, C, D, E, F,G and I) • /10T = 10 = Maximum pressure (bar); T=threaded connection
Factor:: Wilo SE.

Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund

View All Listings by this Company
Manufacturer:: Wilo Salmson France

Company Name
Wilo Salmson France
Address
80 Boulevard de l'Industrie CS 90527 F-53005 LAVAL Cedex
Phone
+33 2 43 59 54 00

View All Listings by this Company

WRAS Approval Number: #2105052

Single pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2105052
Expiry date:: 31/05/2026
Size:: 1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:: wilo on body. Wilo, Model, WRAS, PN & max temp
Installation Requirements:: R001 R415
Model:: SINGLE PUMP BOOSTER SET: Isar BOOST5-E-3 (WILO) & Isar BOOST5-E-3-G (WILO)- single pump, size 3 m³/h (50l/min). SINGLE PUMP BOOSTER SET: Isar BOOST5-E-5 (WILO) & Isar BOOST5-E-5-G (WILO) -single pump, size 5 m³/h (83.33l/min).
Factor:: Wilo SE.

Company Name
Wilo SE.
Address
Nortkirchenstraße 100, 442363, Dortmund

View All Listings by this Company