Range of booster sets consisting of two to four electronically controlled pumps which are connected in parallel and mounted on a common base provided with suction and discharge manifolds, spherical valves, expansion vessels and pressure gauge/transducers and non return valves. Cold water use only. Maximum working pressure 10 bar where the MTPA vessel is installed. 16 bar where the MTMB vessel is used.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1910316

Expiry date:

31/10/2024

Size:

SP2V – 2” BSP(M) inlet x 1 ½” BSP(M) outlet SP3V – 2 ½” BSP(M) inlet x 1 ½” BSP(M) outlet SP4V – 3” BSP(M) inlet x 1 ½” BSP(M) outlet

Marking:

Model, year of manufacture YYYY, serial number and Fluid Water or Stuart Turner on adhesive label on rear of control panel

Installation Requirements:

R001 R415

Model:

Cold Water booster sets series SP2V, SP3V, SP4V (Horizontal pump version) Cold Water booster sets series SP2V, SP3V, SP4V (Vertical pump version) Where the following codes can be applied: SP = Product Range Name A = Number of Pumps (2,3 or 4 pumps) V = Variable Speed B = Pump Model (Horizontal or Vertical) C = Controller type (MAB-MARB) D = Power input (T = 3 Phase – M = 1Phase) E = Vessel Capacity (24= 1 of 24 litre Vessel), (48= 2 of 24 litre Vessels), (72= 3 of 24 litre Vessels), (96= 4 of 24 litre Vessels) Example: SP2V-5HM06S-MAB-T/24 SP = Product Range Name A = 2 Pumps V = Variable Speed B = 5HM06S C = MAB D = T – 3 Phase E = Vessel Capacity 24L

Factor:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

Unit 6 North Point Business Park Selby Road Eggborough East Yorkshire

Postcode

DN14 0JT

Phone

01977 801911

General Email

aquaboost@stuart-turner.co.uk

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111366

Expiry date:

30/11/2026

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 3 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Proviso:

If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap.

Factor:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

Unit 6 North Point Business Park Selby Road Eggborough East Yorkshire

Postcode

DN14 0JT

Phone

01977 801911

General Email

aquaboost@stuart-turner.co.uk

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AB’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111367

Expiry date:

30/11/2026

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 5 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Proviso:

If implemented, the warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AB Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AB = ‘AB’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AB In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AB air gap.

Factor:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

Unit 6 North Point Business Park Selby Road Eggborough East Yorkshire

Postcode

DN14 0JT

Phone

01977 801911

General Email

aquaboost@stuart-turner.co.uk

View All Listings by this Company