Combination Tap Assemblies
Section Code 0470 : Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #1907905
Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork or quarter turn ceramic disc headwork (with a single lever operating member. The spout outlets incorporate a plastic flow straightener.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907905
- Expiry date:
- 31/07/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
- Marking:
- Cascade on body or operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
011.1120.3 & 012.1120.3.
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1907908
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907908
- Expiry date:
- 31/07/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
- Marking:
- Cascade on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
015.1120.3
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1907360
Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts.
Maximum working pressure 5.5 Bar. Maximum operating temperature 70°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907360
- Expiry date:
- 31/07/2024
- Size:
- ½” BSP (M)
- Marking:
- NSS (abbreviation of manufacturer) on body.
- Installation Requirements:
- R001 R006
- Model:
-
ACT2044 & TDM1CM
- Factor:
- Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L
Zenith Park
Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk
View All Listings by this Company - Manufacturer:
- Ningbo Swan Sanitary Company
Company Name
Ningbo Swan Sanitary Company
Address
Taoyuan Village
Hengjjie Town
Haishu Dist
Postcode
China
Country
Ningbo
General Email
View All Listings by this Company
WRAS Approval Number: #1907368
Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts.
Maximum working pressure 5.5 Bar. Maximum operating temperature 70°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907368
- Expiry date:
- 31/07/2024
- Size:
- ½” BSP (M)
- Marking:
- NSS (abbreviation of manufacturer) on body.
- Installation Requirements:
- R001 R006
- Model:
-
ACT2045, TDM1CM/LV, TAP9023
- Factor:
- Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L
Zenith Park
Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk
View All Listings by this Company - Manufacturer:
- Ningbo Swan Sanitary Company
Company Name
Ningbo Swan Sanitary Company
Address
Taoyuan Village
Hengjjie Town
Haishu Dist
Postcode
China
Country
Ningbo
General Email
View All Listings by this Company
WRAS Approval Number: #1907918
Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork or quarter turn ceramic disc headwork (with a single lever operating member. The spout outlets incorporate a plastic flow straightener.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907918
- Expiry date:
- 31/07/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
- Marking:
- INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY OR OPERATING MEMBER
- Installation Requirements:
- R001 R006 R010
- Model:
-
INF-AGU-001 & INF-AZA-001
- Factor:
- FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE
QUARRY LANE
Postcode
PO19 8PE
View All Listings by this Company
WRAS Approval Number: #1907919
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1907919
- Expiry date:
- 31/07/2024
- Size:
- Stainless steel braided EPDM lined hose assemblies with ½” BSP female captive nut end connections
- Marking:
- INFINITA REGISTERED TRADEMARK OF FORTIS ON BASE OF TAP BODY
- Installation Requirements:
- R001 R006 R010
- Model:
-
INF-VID-001
- Factor:
- FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE
QUARRY LANE
Postcode
PO19 8PE
View All Listings by this Company
WRAS Approval Number: #1905086
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1905086
- Expiry date:
- 31/05/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
- Marking:
- NABIS (BRAND OF WOLSELEY) ON BASE OF TAP BODY
- Installation Requirements:
- R001 R006 R010
- Model:
-
B08913 COSTENO
- Factor:
- Wolseley
Company Name
Wolseley
Address
Kingmaker Court
Warwick Technology Park
Warwick
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #1906123
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener.
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1906123
- Expiry date:
- 30/06/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
- Marking:
- NABIS ON OPERATING MEMBER
NABIS ON INDICE ON MODEL B0819 ONLY
- Installation Requirements:
- R001 R006 R010
- Model:
-
B08927, B08923 & B08917
- Factor:
- Wolseley
Company Name
Wolseley
Address
Kingmaker Court
Warwick Technology Park
Warwick
Postcode
CV34 6DY
View All Listings by this Company
WRAS Approval Number: #1909321
Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated or brushed nickel brass or black coloured finish), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909321
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Caple on body
- Installation Requirements:
- R001 R006 R010
- Model:
-
AVE4/CH, AVE4/BN, WAS4/CH, WAS4/BN & ZUBQ4/CH.
Model added March 2020: AVE4/BC.
- Factor:
- Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way
Avonmouth
Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk
View All Listings by this Company
WRAS Approval Number: #1909334
Single hole, single outlet (swivel) combination tap assembly (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator.
Maximum working pressure 4.1 bar. Maximum operating temperature 60°C
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909334
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Kohler on face plate
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
985W-4-**
Where ** denotes finish and can be replaced by:
BZ - Antique Bronze.
SA - Antique Silver.
96 – Biscuit.
7 – Black.
W7 - Black Nickel.
LB – Bronze.
G - Brushed Chrome.
AG - Brushed Nickel.
BS - Brushed Stainless.
FGN – Chartreuse.
FRD - Cherry Red.
GN – Gunmetal.
BL - Matte Black.
YG - Matte Gold.
FNY - Navy Blue.
AD - Nickel Silver.
R2B - Oil Rubbed Bronze-Gold.
2BZ - Oil Rubbed Bronze.
CP - Polished Chrome.
1CP - Polished Chrome.
ABS PGD - Polished Gold.
24K - Polished Gold.
S - Polished Stainless.
AGP PVD - Brushed Nickel.
24P PVD - Polished Gold.
ADP PVD - Silver Nickel.
FBG - Retro Blue.
RGD - Rose Gold.
TB - Satin Black.
SSL - Sterling Silver.
TT – Titanium.
ULB - Un-lacquered Brass.
BV - Vibrant Brushed Bronze.
BN - Vibrant Brushed Nickel.
AF - Vibrant French Gold.
BGD - Vibrant Modern Brushed Gold.
PB - Vibrant Polished Brass.
SN - Vibrant Polished Nickel.
VS - Vibrant Stainless.
VNT – Vintage Nickel.
W6 - Weathered Bronze.
0 – White, MB - Modern Brass.
- Factor:
- Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road,
Cheltenham,
Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000
View All Listings by this Company - Manufacturer:
- Kohler Co
Company Name
Kohler Co
Address
444 Highland Drive
Kohler
Wisconsin
Country
53044
View All Listings by this Company
Back To Directory Sections Page 3 of 52