Directory Search Results

Print List

#2103009

Whitewolf Alpha ranges of Direct, Indirect, Solar Single, Solar Twin, Slim Direct and Slim Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103009
Size:
22mm compression (Inlet Manifold)
Marking:
Whitewolf Cylinders on front, technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.
Model:
WWA90D - Whitewolf Alpha 90 Direct WWA120D - Whitewolf Alpha 120 Direct WWA150D - Whitewolf Alpha 150 Direct WWA170D - Whitewolf Alpha 170 Direct WWA200D - Whitewolf Alpha 200 Direct WWA250D - Whitewolf Alpha 250 Direct WWA300D - Whitewolf Alpha 300 Direct WWA90I - Whitewolf Alpha 90 Indirect WWA120I - Whitewolf Alpha 120 Indirect WWA150I - Whitewolf Alpha 150 Indirect WWA170I - Whitewolf Alpha 170 Indirect WWA200I - Whitewolf Alpha 200 Indirect WWA250I - Whitewolf Alpha 250 Indirect WWA300I - Whitewolf Alpha 300 Indirect WWA170S - Whitewolf Alpha 170 Indirect Solar Single Coil WWA200S - Whitewolf Alpha 200 Indirect Solar Single Coil WWA250S - Whitewolf Alpha 250 Indirect Solar Single Coil WWA300S - Whitewolf Alpha 300 Indirect Solar Single Coil WWA170T - Whitewolf Alpha 170 Indirect Solar Twin Coil WWA200T - Whitewolf Alpha 200 Indirect Solar Twin Coil WWA250T - Whitewolf Alpha 250 Indirect Solar Twin Coil WWA300T - Whitewolf Alpha 300 Indirect Solar Twin Coil WWAS60D - Whitewolf Alpha Slim 60 Direct WWAS90D - Whitewolf Alpha Slim 90 Direct WWAS120D - Whitewolf Alpha Slim 120 Direct WWAS150D - Whitewolf Alpha Slim 150 Direct WWAS170D - Whitewolf Alpha Slim 170 Direct WWAS200D - Whitewolf Alpha Slim 200 Direct WWAS60I - Whitewolf Alpha Slim 60 Indirect WWAS90I - Whitewolf Alpha Slim 90 Indirect WWAS120I - Whitewolf Alpha Slim 120 Indirect WWAS150I - Whitewolf Alpha Slim 150 Indirect WWAS170I - Whitewolf Alpha Slim 170 Indirect WWAS200I - Whitewolf Alpha Slim 200 Indirect
Product Images

Approval Holder:
Whitewolf Cylinders Ltd
Company Name
Whitewolf Cylinders Ltd
Address
Unit 2, 30 Junction Business Park 119/121 Ouzlewell Green Lofthouse, West Yorkshire
Postcode
WF3 3QW
Country
United Kingdom
Phone
01132 822710
General Email
mail@whitewolfcylinders.com

View All Listings by this Company

Print This Approval


#2012359

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C. Model added September 2021 (501500) has a maximum operating temperature of 120°C. All other models have a maximum operating temperature of 115°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2012359
Size:
See model
Marking:
Caleffi logo on body.
Installation Requirements:
R001 R200
Expiry date:
31/12/2025
Model:
Serie 502 Robocal: ⅜" BSP (M): 502430. 502430 CON. 502430 CST. 502431 BSC. 502434 CST. 502435 CST. 502533. 502533 FRT. 502533 RIF. 502533 TAK. 502934 CST. 502937 BSC. Art. 502 Robocal with flow valve: ¼" BSP (M): 502420. 502530. ⅜" BSP (M): 502530 TH. 502530 TH1. 502930 TH. Art. 502 Robocal Long: ⅜" BSP (M): 502630. 502630 CST. 502630 WLF. 502631 CST. 502635 CST. 502636 CST. 502638 CST. 502638 OEM. 502730. 502730 A. 502730 BSC. 502730 CST. 502730 GRN. 502730 NTR. 502822. ½" BSP (M): 502640. 502643A. 15mm compression: 502649. Art. 502 Minical ⅜": ⅜" BSP (M): 502030. 502030 CON. 502030 CST. 502031. 502034 CST. 502035 CST. 502036 CST. 502037 CST. 502037 VLL. 502037 WLF. 502038 CST. 502130. 502130 CST. 502130 ENC. 502130 FRT. 502130 GRN. 502130 TAK. 502130 TH. 502130 TH1. 502131. 502131 TH. 502132 DEC. 502133. 502134 DEC. 502135 RIF. 502231. 502231 CST. 502231 TH. 502232 TH. Art. 502 Minical ½" BSP (M): 502020 CST. 502040. 502040 CON. 502040 CST. 502040 MI. 502040A. 502041. 502041 MI. 502043. 502043 CST. 502043 IMM. 502043A. 502043A CST. 502046 IMM. 502140. 502140 ENC. 502140 FRT. 502141. 502142. 502144 ART. 502144 DEC. 502145 RIF. 502241. 502242 TH. 502243A. 502246 IMM. 502343A. ¾" BSP (M): 502050. 502051. 502052 CST. 1" BSP (M): 502060. 502061. Model added September 2021: ¾” BSP (F): 501500.
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2101023

Range of wall mounted, concealed, manual blending valves (chromium plated brass) incorporating a ceramic cartridge headwork, with a single lever operating member, controlling both flow and temperature. Model 36011660 is supplied with a shower hose and handset. The outlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2101023
Size:
½” BSP (F)
Marking:
Dornbracht on shower handset and cover plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2026
Model:
36045660, 36011660 & 3500397090 concealed rough part.
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2101036

Range of deck mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks with either single lever (6900XX/METAL only) or dome type (all other models). The product is supplied with a shower hose and handset. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2101036
Size:
PEX or EPDM lined hose assemblies with ½” captive nuts
Marking:
Swadling Brassware or Swadling logo on operating member. Swadling logo on conical nut.
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/01/2026
Model:
Illustrious 9900XX, 9903XX, 9906XX, 9909XX & 9902XX. Engineer 8900XX. Absolute 6900XX/METAL. XX denotes finish and can be replaced with: NP = Nickel Plate. NB = Nickel Brushed. CP = Chrome Plated. MG = Gold Plated. LB = Living Brass. GB = Gold Brushed. BB = Brushed Brass. AB = Aged Brass.
Product Images

Approval Holder:
Matki Plc.
Company Name
Matki Plc.
Address
Churchward Road Yate Bristol
Postcode
BS37 5PL

View All Listings by this Company
Manufacturer:
Swadling Brassware
Company Name
Swadling Brassware
Address

View All Listings by this Company

Print This Approval


#2101043

Range of wall mounted concealed shower valves (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The shower outlet incorporates an approved single check valve cartridge however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Products are supplied with overhead shower outlet and shower hose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2101043
Size:
½” BSP (F)
Marking:
Dornbracht on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2026
Model:
3505097090 & 36112970
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 100 of 802

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.