Range of horizontal multistage close coupled centrifugal pumps incorporating stainless steel cased bodies and impellers. Maximum working pressure: See models. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241004726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F) - 3” BSP (F). DN40 - DN80 flange.

Marking:

Calpeda and technical info on data plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

MXH Series: (304 stainless models) MXH/MXHM 202, 203, 204, 205, 206 – 1 ¼” x 1” – 8 bar. MXH/MXHM 402, 403, 404, 405, 406 – 1 1/2” x 1” – 8 bar. MXH/MXHM 802, 803, 804, 805 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXHM 1602, 1603, 1604, 1605, 1606 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXH-F 2001, 2002, 2003, 2004, 2005 – 2 ¼” x 1 1/2” – 10 bar. MXH/MXH-F 3201, 3202, 3203, 3204 – 2 1/2” x 2” – 10 bar. MXH/MXH-F 4801, 4802, 4803 – 3” x 2 1/2” – 10 bar. (316 stainless models) MXHL/MXHLM 202, 203, 204, 205, 206 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 402, 403, 404, 405, 406 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 802, 803, 804, 805 - 1 1/2” x 1” – 8 bar. ‘F’ in the code indictates flanged connection. There are four numbers to identify pump’s size: the first two indicate the flow rate (in m3/h); the second two indicate the number of stage (ex. Mxh 3204: 32 m3/h, 4 stages; mxh 203: 2 m3/h, 3 stages) A letter may be added at the end of the pump model to identify the current motor model fitted to the pump e.g. MXH203* where * can be E, /A, /B, /C etc. Example MXH203/A, MXH204/B etc.

Product Images

Approval Holder:

Calpeda S.p.A

Company Name

Calpeda S.p.A

Address

Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza

Country

Italy

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Pentax logo, model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Manufacturer:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of vertical (CVM) or horizontal (CHM) multistage pumps with stainless-steel bodies and stainless-steel impellers, intermediate chambers, shaft and outer sleeve and EPDM seals. Maximum working pressure: 25 Bar. Maximum working temperature: 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below.

Marking:

Groundfos Logo, D.O.M (YYYY.MM.DD), series number, max temp, max pressure and other information on data plate on body. Flow arrow on body

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CV(H)M 4: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN20. CV(H)M 5: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN40. CV(H)M 6: 2 to 11 stages: Suction flange – DN65, Discharge flange – DN40. CV(H)M 10: 2 to 10 stages: Suction flange – DN100, Discharge flange – DN80.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of ABS plastic shower handsets, (various finishes) Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240488002

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

707743 Shower handset chrome 707839 Shower handset black

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

A range of wall mounted shower handsets (brass bodies) incorporating approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, and plastic flow regulators. The products are also supplied with shower hoses and handset holders. Maximum operating temperature 60.0°C Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241002057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Volevatch on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

B/DT-00-02 (1.5m shower hose) & B/DT-00-03 (2m shower hose).

Product Images

Approval Holder:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of shower outlets (brass bodies – various finishes) incorporating a PEX lined hose as an inner pathway with an aerator type outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241002076

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

ZHONG RUI YI SHENG on shower body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

WJ6187000 XX Where XX denotes the finish and can be replaced with any of the following: CH = Chrome BN = Stainless Steel BBL = Brushed Black BBR = Brushed Brass, MB = Matt Black BRZ = Brushed Bronze

Product Images

Manufacturer:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Range wall mounted shower outlet connectors with brass bodies, chrome finish. The outlet incorporates a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum operating pressure 10 Bar. Maximum operating temperature 70°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241004714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Keuco on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

59547xx00zz 59592xx00zz 59993xx0000

Product Images

Approval Holder:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36 Hemer

Postcode

58675

Country

Germany

Phone

+49 2372 / 904-265

General Email

info@keuco.de

View All Listings by this Company

Range of overhead shower outlets, wall and ceiling mounted shower arms with (brass bodies - various finishes). The overhead shower inlet incorporates a combined NBR washer and stainless steel strainer. Maximum operating pressure 5 bar. Maximum operating temperature 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241004007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) Overhead shower ½” BSP (M) Shower arms

Marking:

TWC Diamond Logo stamped on Trim. Model SH-PRE50, marking on the body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

ANC49-XX ANC53-XX HIG53-XX ELV46-XX ANC55-XX HIG49-XX ELV47-XX XX Denotes the finish codes as below: Aged Brass, AB Aged Nickel, AN Heritage Brass, HB Charcoal, CH Custom Gloss Lacquer, GL Custom Matt Lacquer, MT Black Mirror, BM Polished Brass, PB Green Patina, GP Gun Metal, GM Matt Black, MB Oil Rubbed Bronze, OR Pewter, PT Polished Gold, PG Polished Chrome, PC Polished Copper, CO Natural Brass, NB Polished Nickel, PN Rustica Brass, RB Brushed Gold, BG Brushed Brass, BB Brushed Nickel, BN Tarnished Brass, TB Vintage Brass, VB Vintage Copper, VC Satin Brass, SB Luxe Brass, LB

Product Images

Approval Holder:

The Watermark Collection

Company Name

The Watermark Collection

Address

16a Tower Workshops 58 Riley Road London

Country

SE1 3DG

View All Listings by this Company

Range of shower handsets and overhead showers, (plastic bodies - various finishes). The inlets incorporate a plastic flow restrictor and stainless steel strainer. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241004032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) Handset ½” BSP (F) Overhead shower

Marking:

Methven or Satinet on body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

48212 265901 265907 AOHSBK AOHSCPUK ECO01 KRLFHSBB KRLFHSBK KRLFHSBN KRLFHSCP KRLFHSGM KRLFWSCP OSQ230CP SJK005 SJK005-LF SJK23 SJK23-LF X-SJK23

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of wall mounted shower heads incorporating (chromium plated brass body) and EPDM ‘O’-rings. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241004040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

DTC15 on body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

AVSH001

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company