Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

241002020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26mm O.D.

Marking:

HG on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30079500 & 30650210

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression models are for use with copper pipe (manufactured to BS EN 1057)

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of float operated inlet valves incorporating with brass bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2100 Valves

Section Subtitle:

Float operated, equilibrium, metal.

WRAS Approval Number:

241004702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

No float supplied

Size:

see models

Marking:

V&G, size, date of manufacture YYYY.MM on body

Installation Requirements:

R001 R280 R350

Expiry date:

31/10/2029

Model:

VG-10172-G15 ½” BSP(M) VG-10172-G20 ¾” BSP (M) VG-10172-G25 1” BSP (M) VG-10172-G32 1-1/4” BSP (M) VG-10172-G40 1-1/2” BSP (M) VG-10172-G50 2” BSP (M)

Product Images

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Range of regulating and shut-off valves with brass bodies and EPDM ‘O’-Rings. Maximum working pressure 16.0 Bar for BSP (M) and 25.0 bar for BSP (F). Maximum operating temperature 85.0°C

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

241002007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Male thread DN15 – DN 50 Female thread DN15 – DN50

Marking:

Oventrop logo, flow arrow, PN and DN on body. Oventrop, product name and DN on face plate.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HydroControl V Double regulating valve, female thread 1062404 - DN15 1062406 - DN20 1062408 - DN25 1062410 - DN32 1062412 - DN40 1062416 - DN50 HydroControl V Double regulating valve, male thread 1062604 - DN15 1062606 - DN20 1062608 - DN25 1062610 - DN32 1062612 - DN40 1062616 - DN50 HydroControl A Shutoff valve, female thread, 1067524 - DN15 1067526 - DN20 1067528 - DN25 1067530 - DN32 1067532 - DN40 1067536 - DN50 HydroControl A Shutoff valve, male thread, 1067624 - DN15 1067626 - DN20 1067628 - DN25 1067630 - DN32 1067632 - DN40 1067636 - DN50 HydroControl M Double regulating valve with metering station, female thread 1065844 - DN15 ULF 1065834 - DN15 LF 1065824 - DN15 MF 1065804 - DN15 1065806 - DN20 1065808 - DN25 1065810 - DN32 1065812 - DN40 1065816 - DN50

Product Images

Manufacturer:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of wall mounted flow control valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork. The valves are supplied with multiple trim sets and operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

241004006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Please see models for operating member supplied.

Size:

½” BSP (M)

Marking:

The Watermark Collection Logo on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

AIC53-XX Anika Crosshead Wall Mounted Valve Supplied with a “three spoke” Handle AIL53-XX Anika Lever Wall Mounted Valve Supplied with a “tapered lever” Handle BRO54-XX Brooklyn Wall Mounted Valve Supplied with a "wheel shaped" Handle ELV50-XX Elan Vital Wall Mounted Valve Supplied with a "plumbing style lever" Handle ELM54-XX Elements Wall Mounted Valve Supplied with a "circular flat" Handle HIC55-XX Highline Crosshead Wall Mounted Valve Supplied with a "crosshead" Handle HIL55-XX Highline Lever Wall Mounted Valve Supplied with a "lever" Handle LOF49-XX Loft Wall Mounted Valve Supplied with a "tubular lever" Handle LOC53-XX London Crosshead Wall Mounted Valve Supplied with a "crosshead and barrel style" Handle LOL53-XX London Lever Wall Mounted Valve Supplied with a "lever and barrel style" Handle SEC53-XX Sense Crosshead Wall Mounted Valve Supplied with a "hammered base crosshead" Handle SED53-XX Sense Dial Wall Mounted Valve Supplied with a "hammered base dial" Handle SEL53-XX Sense Lever Wall Mounted Valve Supplied with a "hammered base lever" Handle TIN53-XX Titanium Wall Mounted Valve Supplied with a "knurled body" Handle URA54-XX Urbane Astor Wall Mounted Valve Supplied with a "knurled lever" Handle URC54-XX Urbane Cooper Wall Mounted Valve Supplied with a "knurled crosshead" Handle ZEC53-XX Zen Bianco Carrara Wall Mounted Valve Supplied with a "bianco carrara marble" Handle ZEF53-XX Zen Finished Metal Wall Mounted Valve Supplied with a "tapering circular metal" Handle ZEH53-XX Zen Honey Onyx Wall Mounted Valve Supplied with a "honey onyx" Handle ZEI53-XX Zen Ice White Wall Mounted Valve Supplied with a "ice white onyx" Handle ZEM53-XX Zen Nero Marqunia Wall Mounted Valve Supplied with a "nero marquina" Handle XX Denotes the finish codes as below: Aged Brass, AB Aged Nickel, AN Heritage Brass, HB Charcoal, CH Custom Gloss Lacquer, GL Custom Matt Lacquer, MT Black Mirror, BM Polished Brass, PB Green Patina, GP Gun Metal, GM Matt Black, MB Oil Rubbed Bronze, OR Pewter, PT Polished Gold, PG Polished Chrome, PC Polished Copper, CO Natural Brass, NB Polished Nickel, PN Rustica Brass, RB Brushed Gold, BG Brushed Brass, BB Brushed Nickel, BN Tarnished Brass, TB Vintage Brass, VB Vintage Copper, VC Satin Brass, SB Luxe Brass, LB

Product Images

Approval Holder:

The Watermark Collection

Company Name

The Watermark Collection

Address

16a Tower Workshops 58 Riley Road London

Country

SE1 3DG

View All Listings by this Company

Range of two way diverter valves, (brass bodies – various finishes). Incorporating a quarter turn ceramic headwork. The valves are supplied with multiple trim sets and operating members. Maximum operating pressure 5 bar. Maximum operating temperature 60°C

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

241004008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Please see models for operating member supplied

Size:

½” BSP (M)

Marking:

H Circle logo with “655” etched on body. TWC (the Watermark Collection logo) on trim set

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

AIC53-XX Anika Crosshead Wall Mounted 2 Way Flow Control Valve Supplied with a “three spoke” Handle AIL53-XX Anika Lever Wall Mounted 2 Way Flow Control Valve Supplied with a “tapered lever” Handle BRO54-XX Brooklyn Wall Mounted 2 Way Flow Control Valve Supplied with a "wheel shaped" Handle ELV50-XX Elan Vital Wall Mounted 2 Way Flow Control Valve Supplied with a "plumbing style lever" Handle ELM54-XX Elements Wall Mounted 2 Way Flow Control Valve Supplied with a "circular flat" Handle HIC55-XX Highline Crosshead Wall Mounted 2 Way Flow Control Valve Supplied with a "crosshead" Handle HIL55-XX Highline Lever Wall Mounted 2 Way Flow Control Valve Supplied with a "lever" Handle LOF49-XX Loft Wall Mounted 2 Way Flow Control Valve Supplied with a "tubular lever" Handle LOC53-XX London Crosshead Wall Mounted 2 Way Flow Control Valve Supplied with a "crosshead and barrel style" Handle LOL53-XX London Lever Wall Mounted 2 Way Flow Control Valve Supplied with a "lever and barrel style" Handle SEC53-XX Sense Crosshead Wall Mounted 2 Way Flow Control Valve Supplied with a "hammered base crosshead" Handle SED53-XX Sense Dial Wall Mounted 2 Way Flow Control Valve Supplied with a "hammered base dial" Handle SEL53-XX Sense Lever Wall Mounted 2 Way Flow Control Valve Supplied with a "hammered base lever" Handle TIN53-XX Titanium Wall Mounted 2 Way Flow Control Valve Supplied with a "knurled body" Handle URA54-XX Urbane Astor Wall Mounted 2 Way Flow Control Valve Supplied with a "knurled lever" Handle URC54-XX Urbane Cooper Wall Mounted 2 Way Flow Control Valve Supplied with a "knurled crosshead" Handle ZEC53-XX Zen Bianco Carrara Wall Mounted 2 Way Flow Control Valve Supplied with a "bianco carrara marble" Handle ZEF53-XX Zen Finished Metal Wall Mounted 2 Way Flow Control Valve Supplied with a "tapering circular metal" Handle ZEH53-XX Zen Honey Onyx Wall Mounted 2 Way Flow Control Valve Supplied with a "honey onyx" Handle ZEI53-XX Zen Ice White Wall Mounted 2 Way Flow Control Valve Supplied with a "ice white onyx" Handle ZEM53-XX Zen Nero Marqunia Wall Mounted 2 Way Flow Control Valve Supplied with a "nero marquina" Handle XX Denotes the finish codes as below: Aged Brass, AB Aged Nickel, AN Heritage Brass, HB Charcoal, CH Custom Gloss Lacquer, GL Custom Matt Lacquer, MT Black Mirror, BM Polished Brass, PB Green Patina, GP Gun Metal, GM Matt Black, MB Oil Rubbed Bronze, OR Pewter, PT Polished Gold, PG Polished Chrome, PC Polished Copper, CO Natural Brass, NB Polished Nickel, PN Rustica Brass, RB Brushed Gold, BG Brushed Brass, BB Brushed Nickel, BN Tarnished Brass, TB Vintage Brass, VB Vintage Copper, VC Satin Brass, SB Luxe Brass, LB

Product Images

Approval Holder:

The Watermark Collection

Company Name

The Watermark Collection

Address

16a Tower Workshops 58 Riley Road London

Country

SE1 3DG

View All Listings by this Company

Range of spring loaded, non-return valves with ductile iron bodies (blue epoxy powder coated) with stainless steel discs, springs and shafts and EPDM seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

WRAS Approval Number:

2310407

Size:

Flanged connection - DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.

Marking:

Oventrop, DN, PN & WRAS on data plate. DN, PN & Flow arrow on body,

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

166 20 SERIES &107 26 SERIES CHECK VALVE SIZE DN 50MM-DN 300MM

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of wafer or globe type spring loaded, resilient trim, non-return valves with cast iron bodies (blue epoxy powder coated). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2188 Valves

Section Subtitle:

Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.

WRAS Approval Number:

240904730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN600

Marking:

IMI, TA, PN, DN &DATE OD MANUFATTURE YY/MM & FLOW ARROW ON BODY, WRAS, CE & MODEL ON DATA PLATE ON BODY.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

4335 TA-NRV F

Approval Holder:

IMI Hydronic Engineering

Company Name

IMI Hydronic Engineering

Address

Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company

Range of adjustable, in-line pressure reducing valves with blue epoxy coated, cast iron bodies. SP models: maximum supply pressure 25.0 bar, outlet pressure range 1.5 to 7.0 bar. HP models: maximum supply pressure 25.0 bar, outlet pressure range 3.0 to 12.0 bar. LP models: maximum supply pressure 8.0 bar, outlet pressure range 0.5 to 3.0 bar. Maximum operating temperature 60°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

240702711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN125 flanged inlet and outlet.

Marking:

Albion, model and set pressure range on label on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

ART 688 LP (0.5 – 3 bar outlet) ART 688 SP (1.5 – 7 bar outlet) ART 688 HP (3.0 – 12 bar outlet) ART 689 SP (1.5 – 7 bar outlet) ART 689 HP (3.0 – 12 bar outlet)

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of pre-set, in-line pressure reducing valves incorporating DZR brass or bronze bodies and a stainless-steel strainer. The valves are supplied with an adjustable pressure range between 0.5-6.0 bar. Maximum inlet supply pressure 25.0 bar; except for 536660 with 16.0 bar. Maximum operating temperature 85°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

241204705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see mdoel

Marking:

Caleffi logo, flow arrow, CR (on DZR brass models) and DN on body.

Installation Requirements:

R001 R120

Expiry date:

31/12/2029

Model:

Models with gauge port: 536040: ¾” BSP (M) x ½” BSP (M) Reducer 536050: 1” BSP (M) x ¾” BSP (M) Reducer 536060: 1¼” BSP (M) x 1” BSP (M) Reducer 536070: 1 ½” BSP (M) x 1 ¼” BSP (M) Reducer 536080: 2” BSP (M) x 1 ½” BSP (M) Reducer 536240: ½” BSP (F) 536250: ¾” BSP (F) 536260: 1” BSP (F) 536590: 2 ½” BSP x 2” BSP (M) Reducer 536660: DN65 536580: 1½” BSP (M) x 2” BSP (M) Reducer. 536252: ¾” x ¾” BSP (F) Models complete with pressure gauge: 536041: ¾” BSP (M) x ½” BSP (M) Reducer 536051: 1” BSP (M) x ¾” BSP (M) Reducer 536061: 1¼” BSP (M) x 1” BSO (M) Reducer 536071: 1 ½” BSP (M) x 1 ¼” BSP (M) Reducer 536081: 2” BSP (M) x 1 ½” BSP (M) Reducer 536241: ½” BSP (F) 536251: ¾BSP (F) 536261: 1” BSP (F) 536591: 2 ½” BSP x 2” BSP (M) Reducer 536581: 1½" BSP (M)

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

View All Listings by this Company