Range of pillar taps, incorporating a non-rising spindle headwork with cross top or dome type operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with metal back nuts. All taps are supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250288003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

TP on body

Installation Requirements:

R001 R006

Expiry date:

28/02/2030

Model:

604570 Base sink taps 604583 Cross head sink taps

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of stainless steel braided, nylon braided, double locked (metal outer) or reinforced (see model), PEX/HTRPE lined flexible hose assemblies with EPDM washers and O rings. Available with a variety of finishes or end connections (see model). Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

250302005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

See model

Marking:

WRAS, YS and date of manufacture (YYMM) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

2012 XX X DNX AxB LXXXX Where 2012 denotes the series name and hose lining: 20 = series name 12 = inner hose material: PEX/HTRPE Where the first two XX denotes the colour of the exterior hose and can be replaced by: GY = grey, YS = transparent, WH = white, BK = black, GO = golden, CP = chrome, BR = bronze, BN = nickel, Blank = stainless nature, RE = red, BL = blue, SS = stainless nature, ORB = oil rubbed bronze, AC = antique copper plated Where the third X denotes exterior hose and replaced by: T = reinforced hose, LL = nylon braided sheath, SS = stainless steel braided sheath, S = double lock hose Where DNX denotes the nominal diameter of inner hose and can be replaced by: DN4, DN6, DN8, DN10 Where A×B denotes the free combination of hose end connector and can be replaced by: T8 = (8mm Quick Release Spigot), T10 = (10mm Quick Release Spigot), T12 = (12mm Quick Release Spigot), T14 = (14mm Quick Release Spigot), T15 = (15mm Quick Release Spigot), T16 = (16mm Quick Release Spigot), T18 = (18mm Quick Release Spigot), M8 = (8mm Male M Thread), M10 = (10mm Male M Thread), M12 = (12mm Male M Thread), M14 = (14mm Male M Thread), M15 = (15mm Male M Thread), M16 = (16mm Male M Thread), M18 = (18mm Male M Thread), F1/2" = ½” BSP (F), M1/2" = ½” BSP (M), F3/8" = 3/8” BSP (F), M3/8" = 3/8” BSP (M), F3/4" = ¾” BSP (F), M3/4" = ¾” BSP (M), F7/16" = 7/16” BSP (F), M7/16" = 7/16” BSP (M), F9/16" = 9/16” BSP (F), M9/16" = 9/16” BSP (M), F11/16" = 11/16” BSP (F), M11/16" = 11/16” BSP (M). Where LXXXX denotes the length of hose and be replaced by anything between: L0200 (200mm) and L2500 (2500mm)

Manufacturer:

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Company Name

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Address

41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100

Country

China

View All Listings by this Company

Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

250304703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Fastec® F13 internal Ø 20.75 - 20.93mm

Marking:

Teco logo, DN, PN, year and batch/month (YYMM) and F13 on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Manifold with valve on each outlet: DN2309727: DN10 Manifold 2 ways F13F, DN2105548: DN10 Manifold 3 ways F13F, DN1901798: DN10 Manifold 4 ways F13F, DN1901797: DN10 Manifold 5 ways F13F, DN2309733: DN10 Manifold 6 ways F13F, Manifold with valve on inlet: DN2410745: DN15 Manifold 4 ways F13F, DN1901854: DN15 Manifold 5 ways F13F.

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of air venting valves with a gunmetal body. Maximum working pressure 13.5 bar. Maximum operating temperature 95°C.

Section:

1980 Valves

Section Subtitle:

Air venting valve(s) Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

250704007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

NABIC 568, DN size, and product batch code on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

NABIC FIG. 568 range comprising of models: N-568-015: ½” BSP (M). N-568-020: ¾” BSP (M). N-568-025: 1” BSP (M). N-568-032: 1¼” BSP (M). N-568-040: 1½” BSP (M). N-568-050: 2” BSP (M).

Manufacturer:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

View All Listings by this Company

Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

250302008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Needs to get installed in combination with Rapido Smart Box 35.600.

Size:

Only to be used with compatible Grohe products.

Marking:

Grohe SPA logo on rosette or Grohe logo on operating member. Models 24.259, 24.277 and 24.354 include the new Grohe SPA Logo, all other models include standard Grohe Logo.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2030

Model:

24.259.xxx 24.277.xxx 24.354.xxx 24.071.xxx 24.069.xxx 24.065.xx3 24.067.xxx 24.063xx1 24.061.xxx 24.059.xx3 24.057.xx1 24.055.xx2 24.053.xx1 24.051.xx2 24.046.xx3 24.048.xx3 24.044.xxx 24.042.xx2 Where xxx / xx1 / xx2 / xx3 denotes finish, can be replaced by: 000 / 001 / 002 / 003– Chrome DC0 / DC1 / DC2 / DC3 – Supersteel DA0 / DA1 / DA2 / DA3 – Warm sunset AL0 / AL1 / AL2 / AL3 – Brushed hard graphite GL0 / GL1 / GL2 / GL3 – cool sunrise IG0 / IG1 / IG2 / IG3 – chrome/gold

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company