Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

'SureCal' logo, Model, Voltage, Size and other information on label.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250508702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided TPS lined flexible hose assemblies with 15mm push fit connections, for use with copper, PB and PEX pipe.

Marking:

Stuart Turner, model number and technical information on adhesive label on pump.

Installation Requirements:

R001 R009 R415

Expiry date:

31/05/2030

Model:

47714 STORMBOOST 60 with 60 litre accumulator, 47715 STORMBOOST 80 with 80 litre accumulator, 47716 STORMBOOST 100 with 100 litre accumulator, 47717 STORMBOOST 200 with 200 litre accumulator, 47718 STORMBOOST 300 with 300 litre accumulator.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of multistage pumps with stainless steel bodies and impellers. Maximum working pressure 10.0 bar. Cold Water Use Only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250508701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

OLIJU and product info on data plate.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Model:

CHS 3 – 1” Female BSP, CHS 5 – 1” Female BSP, CHS 8 – 1 ¼” Female BSP, CHS 16 – 2” female BSP inlet X 1 ½ Female BSP outlet.

Approval Holder:

OLIJU - Júlio Nogueira Rodrigues

Company Name

OLIJU - Júlio Nogueira Rodrigues

Address

Rua da Mariana, 362 3885-466 Esmoriz Portugal

Country

Portugal

General Email

compras@oliju.com

View All Listings by this Company

Riser rail kit including riser & rose. Fixed head made of stainless steel with a swivel connection Maximum working pressure 10.0 bar. Maximum operating temperature 75°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250503006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”

Marking:

Bristan on Rose

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

KIT115 C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).

Marking:

Aqualisa on the handset body or overhead shower swivel joint.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet use only.

Model:

Chrome Shower handset: ACY1012 Chrome Overhead showers: 704120 704121 704119

Product Images

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

A12231 & A12011 Ranges of shower handsets with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).

Marking:

Bristan on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet use only.

Model:

Shower handsets: A12231 C A12231 BLK A12231 BB A12231 GM A12011 C A12011 BLK A12011 BB A12011 GM

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

DN50 - DN 300 flanged

Marking:

DVK, size & flow arrow on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

YSD Series

Approval Holder:

DVK International Co., Ltd

Company Name

DVK International Co., Ltd

Address

No. 118, Building 1, No 168 Jixin Road, Minhang District, Shanghai.

Postcode

201104

Country

China

General Email

dvkvalve@126.com

View All Listings by this Company

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech, DN and flow arrow on body.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

YSBZ- ½" : ½" BSP, BSPP and NPT (F), YSBZ- ¾" : ¾" BSP, BSPP and NPT (F), YSBZ- 1" : 1" BSP, BSPP and NPT (F), YSBZ- 1¼" : 1¼" BSP, BSPP and NPT (F), YSBZ- 1½" : 1½" BSP, BSPP and NPT (F), YSBZ- 2" : 2" BSP, BSPP and NPT (F).

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Range of wall mounted bib tap with brass bodies (various finishes - see model), incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

250515012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Taizhou Shenglang Sanitary Ware Co., Ltd logo on rear of body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

Non-rising spindle headworks: SL-T40810, SL-T40810B, SL-T40810BB, SL-T40810W, SL-T40810WB, SL-T40810WBB. Quarter turn ceramic disc headworks: SL-T40610, SL-T40610B, SL-T40610BB, SL-T42210, SL-T42210B, SL-T42210BB. Model suffix denotes finish: No suffix: Chrome plated. B suffix: Black. BB suffix: Brushed brass.

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company