Range of inline water meters with brass (16.0 bar models) or bronze (20 bar model) bodies and plastic turbines. Model FL040FM300 has a plastic filter. All models excluding FL150KP450_00_UK: Maximum working pressure 16.0 bar Model FL150KP450_00_UK only: Maximum working pressure 20.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See models.

Marking:

Flostar, Itron, and product info on face plate and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

FL040FM300 – DN40 FloStar (2” BSP (M)), FL050GO300 – DN50 FloStar (2.1/2” BSP (M)), FL505GO300 – DN50 FloStar (DN50 flange), FL658HP300 – DN65 FloStar (DN65 x DN85 flange), FL065HP300 – DN65 FloStar (DN65 flange), FLO801P350 – DN80 FloStar (DN80 flange), FL100JP350 – DN100 FloStar (DN100 flange), FL150KP450 – DN150 FloStar (DN150 flange).

Product Images

Approval Holder:

Itron Metering Solutions UK Ltd

Company Name

Itron Metering Solutions UK Ltd

Address

Unit 10, Haven Exchange Felixstowe Suffolk

Postcode

IP11 2QX

Phone

+44 161 865 1181

View All Listings by this Company

Manufacturer:

ITRON France SAS

Company Name

ITRON France SAS

Address

9 rue Ampère Mâcon

Postcode

71031

Country

France

Phone

+33 6 43 94 48 08

View All Listings by this Company

Range of ultrasonic water meters with plastic (PL) or brass (BR) bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating Temperature 50 C

Section:

1505 Water Meters

Size:

1” BSP (M).

Marking:

Sagemcom logo, type of meter, CE and year of manufacturer (YY) on faceplate of meter.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Siconia WM 20 range Full model code example: WM 20 L 868 I BR 110 R250 Q4 T30 VDF CUST All available options as follows: Product Type: WM = WM: IP68 product. Thread: 20 = DN20: thread reference diameter (G1”). Radio: L = LoRa™ radio, M = Wireless MBus radio, NB = 4G CAT-NBloT radio, CM = 4G CAT-M radio. Frequency: 868 = 868 MHz frequency band (LoRa™, Wireless MBus radio), 8-20 = 4G frequencies band. Country: I = I for India country band definition (optional). Product pipe (body) material: BR = Brass pipe, PL = Plastic pipe. Product pipe length: 130 = Pipe Length in mm (Brass Only), 165 = Pipe Length in mm (Brass & Plastic), 190 = Pipe Length in mm (Brass & Plastic). Ratio: R250 = R MID ratio. Q3: Q2.5 = Q3 MID reference flow and associated inlet/transducer. Here Q3=2.5m3/h, Q4 = Q3=4.0m3/h. Temperature: T50 = MID temperature range. Phone Cell Carrier: VDF = Vodafone carrier, VZW = Verizon carrier. Configuration: PROTO = Product configuration and security. CUST = Customer name.

Product Images

Approval Holder:

Sagemcom Energy & Telecom

Company Name

Sagemcom Energy & Telecom

View All Listings by this Company

Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.

Marking:

Flow arrow & size on side of body, AQUAMOTION, WRAS, size, Model number and pressure rating and product info on dial face.

Installation Requirements:

R001

Expiry date:

29/02/2028

Model:

F50WC, F5WC, F80WC, F100WC, F125WC, F150WC, F200WC, F250WC, F300WC, F350WC, F400WC & F500WC

Approval Holder:

Aquamotion

Company Name

Aquamotion

Address

Unit 7 Woodland Close Mansfield Nottinghamshire

Postcode

NG21 9BF

Country

United Kingdom

Phone

01623 664030

General Email

info@aqua-motion.co.uk

View All Listings by this Company

Range of in-line ultrasonic water meters with DZR brass bodies. The following sizes only include a plastic strainer, DN15 - DN32 sizes (incorporated), DN40 size (optional). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1505 Water Meters

Size:

DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M), DN40 = DN40 Flanged or 2” BSP (M), DN50 = DN50 Flanged or 2½” BSP (M).

Marking:

Diehl logo, Hydrus, CE, size, pressure and other technical information on casing.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

HYDRUS 1.3 Type 171 range: DN15, with 110, 165 & 170mm length, DN20, with 110, 130, 165, 175, 190 & 220mm length, DN25, with 150, 175, & 260mm length, DN32, with 260mm length, DN40, with 200 & 300mm length (200mm not available on flanged model), DN50, with 270 & 300mm length.

Product Images

Approval Holder:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.

Section:

1505 Water Meters

Size:

DN15 – 3.4” BSP (M), DN20 – 1” BSP (M), DN25 – 1.1/4” BSP (M) or DN25 Flanged, DN32 – 1.1/2” BSP (M) or DN32 Flanged, DN40 – 2” BSP (M) or DN40 Flanged.

Marking:

Hydrus, Diehl Metering and product info on casing. Flow arrow on body and cover.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HYDRUS 2 (CW724R): DN15 – Lengths 110, 165 & 170mm, DN20 – Lengths 105, 130, 165, 175, 190 & 220mm, DN25 – Lengths 135, 150, 175 & 260mm, DN32 – Length 260mm, DN40 – Lengths 200 & 300mm. HYDRUS 2 (CC770S): DN25 – Length 260mm, DN32 – Length 260mm, DN40 – Length 300mm. HYDRUS 2 (Composite): DN15 – Lengths 110, 115, 165 & 170mm, DN20 – Length 190mm.

Product Images

Approval Holder:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Re-circulation valve with a plastic body and EPDM O-rings. The product is supplied with a pressure relief valve set at 10.0 bar. Supplied with stainless steel braided EPDM line flexible hoses. Compression connection for use with copper pipe manufactured to BS EN1057. Maximum working pressure 9.5 Bar. Maximum operating temperature 82°C

Section:

1530 Miscellaneous Fittings

Size:

15mm compression inlet/outlet

Marking:

Navien, NSF, flow arrow on body

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

30029753 - NaviCirc

Product Images

Approval Holder:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304317

Size:

DN50 to DN150

Marking:

Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.

Installation Requirements:

R001 R415

Expiry date:

30/04/2028

Model:

VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of multistage pumps (VL and CL series) and submersible pumps (VN, CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL and CL series pumps only).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303041

Note:

VN, CN, ES and CS series submersible pumps: The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

VL and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.

Marking:

Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand CN/CL/CS Series “FPS” brand x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers: 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models), depending on Nominal Flow and Frequency. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T (three phase), M (single phase). x5 = Frequency (Hz): 5 (50 Hz), or 6 (60 Hz). x6 = Motor Configuration: L (Bi-phase, 90° single-phase), D (Three-phase, triangle), or Y (Three-phase, star). N = Mechanical seal elastomer: N = NBR. x7 = Mechanical Seal surface: 1 (Graphite / Silicon Carbide), or 2 (Silicon Carbide). x8 = Float Switch: 0 (without). B = Cable type: B (Blue). x9 = Cable size: A (4G1), B (4G1.5), C (3G1), or D (3G1.5). x10 = Cable length: O: 20m - VN/CN and ES/CS models, E: 5m - VL/CS models. x11 = Control Panel (not in contact with liquid): 0 (without), or 1 (connected - VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty (1¼” Nickel plated brass), I (1¼” inox), or J (2” inox). D = Drinking water approved.

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305073

Size:

DN65 - DN100

Marking:

Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Manufacturer:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of shower handsets with plastic or brass (364 models only) bodies in various finishes (see models).

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301077

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

PPI on rear of handset.

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

364, 364 PVD, L292, L292 PVD, B100111, B100111 MBK1, B100111 BGP, HS181, B11363, B11663, B11663 MBK1, HS107, HS1110CP, HS151, HS123, HS126, HS126 MBK1, L115-CP, HS1002, HS307. Available finishes: No suffix or CP = Chrome plated, PVD = Gold plated brass, BGP = Brushed brass finish, MBK1 = Matt black.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company