Directory Search Results

Print List

#240402081

Range of stainless steel braided, EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240402081
Size:
See model
Marking:
Kingfisher, WRAS and year of manufacture (YYYY) on ferrule
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
5063022590244 - ½” BSP (F) x 15mm comp iso valve, DN10 5063022590213 - ¾” BSP (F) x 22mm comp iso valve, DN13 5063022590237- ¾” BSP (F) x 15mm comp, DN10 5063022590206 - ¾” BSP (F) x 15mm comp iso valve, DN10 5063022590220 - ½” BSP (F) x 15mm comp, DN13

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#240904029

Range of concealed, wall mounted thermostatic blending valves with brass bodies (chromium plated trim sets). The products consist of a two-way diverter and a thermostatic cartridge controlling the temperature. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Gessi backplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
65222+63011 linear Venti20 2 ways (3/4” BSP F), 63012+63011 linear classic 2 ways (3/4” BSP F), 65224+63013 linear Venti20 3 ways (3/4” BSP F), 63014+63013 linear classico 3 ways (3/4” BSP F), 65226+63015 linear Venti20 4 ways (3/4” BSP F), 63016+63015 linear classic 4 ways (3/4” BSP F), 65232+63001 compact Venti20 2 ways (1/2” BSP F), 65234+63001 compact Venti20 3 ways(1/2” BSP F), 63006+63001 compact classic 3 ways (1/2” BSP F), 65242+63055 mixer Venti20 2 ways(1/2” BSP F), 63079+63055 mixer classic 2 ways(1/2” BSP F), 65244+63055 mixer Venti20 3 ways (1/2” BSP F), 63081+63055 mixer classic 3 ways (1/2” BSP F).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#241002032

Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes & strim sets). Incorporating either a ceramic disc headwork, two-way diverter or both (see models). The temperature is controlled independently via a thermostatic cartridge. The valves incorporate approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 44.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets.
Size:
¾” BSP (F)
Marking:
SLION logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Dual control thermostatic valve without diverter SL0316(50), SL0316(51), SL0316(02), SL0316(01), SL0310(09), SL0310(11), SL0317(31), SL0316(00), SL0310(10), SL0310(08), SL0316(58), SL0316(59), SL0314(05) Dual control thermostatic valve with diverter SL0316(52), SL0317(25), SL0317(22), SL0317(30), SL0316(33), SL0311(09), SL0311(08), SL0316(23), SL0311(07), SL0311(06), SL0317(38), SL0317(37), SL0315(12 Three-control thermostatic valve with diverter SL0106(18), SL0105(22), SL0105(33), SL0105(07), SL0106(24), SL0106(26), SL0106(27), SL0105(05), SL0111(07), SL0106(28), SL0106(29), SL0106(30), SL0111(05) Three-control thermostatic valve without diverter SL0106(17), SL0106(16), SL0106(04), SL0106(02), SL0106(03), SL0106(37), SL0106(31), SL0106(05), SL0106(32), SL0106(33), SL0106(34), SL0106(35), SL0106(36)

Print This Approval


#241002007

Range of regulating and shut-off valves with brass bodies and EPDM ‘O’-Rings. Maximum working pressure 16.0 Bar for BSP (M) and 25.0 bar for BSP (F). Maximum operating temperature 85.0°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
241002007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Male thread DN15 – DN 50 Female thread DN15 – DN50
Marking:
Oventrop logo, flow arrow, PN and DN on body. Oventrop, product name and DN on face plate.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
HydroControl V Double regulating valve, female thread 1062404 - DN15 1062406 - DN20 1062408 - DN25 1062410 - DN32 1062412 - DN40 1062416 - DN50 HydroControl V Double regulating valve, male thread 1062604 - DN15 1062606 - DN20 1062608 - DN25 1062610 - DN32 1062612 - DN40 1062616 - DN50 HydroControl A Shutoff valve, female thread, 1067524 - DN15 1067526 - DN20 1067528 - DN25 1067530 - DN32 1067532 - DN40 1067536 - DN50 HydroControl A Shutoff valve, male thread, 1067624 - DN15 1067626 - DN20 1067628 - DN25 1067630 - DN32 1067632 - DN40 1067636 - DN50 HydroControl M Double regulating valve with metering station, female thread 1065844 - DN15 ULF 1065834 - DN15 LF 1065824 - DN15 MF 1065804 - DN15 1065806 - DN20 1065808 - DN25 1065810 - DN32 1065812 - DN40 1065816 - DN50

Manufacturer:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

Print This Approval


#240902709

Range of swing gate, non-return valves with (blue, black or red epoxy powder coated) ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
WRAS Approval Number:
240902709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50 – 300 flanged
Marking:
MECH (manufacturer’s brand), PN, DN, date of manufacture (YYYY), flow arrow and technical information on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
H44X2

Approval Holder:
Jinan Meide Casting Co., Ltd.
Company Name
Jinan Meide Casting Co., Ltd.
Address
No.1 Meide Street, Meigui Town, Pingyin County, Jinan, Shandong
Postcode
250400
Country
China
Phone
+86 (531) 87876706

View All Listings by this Company
Manufacturer:
Jinan Meide Casting Co., Ltd.
Company Name
Jinan Meide Casting Co., Ltd.
Address
No.1 Meide Street, Meigui Town, Pingyin County, Jinan, Shandong
Postcode
250400
Country
China
Phone
+86 (531) 87876706

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 87 of 146

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.