Directory Search Results

Print List

#240502715

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with isolation valve on both the DHW and CH circuits. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel strainer. Some models (see model section) are supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressures: DHW: 10.0 Bar CH: 2.5 Bar Maximum operating temperature: DHW: 65.0°C CH: 85.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240502715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DHW: 15mm compression. CH: 22mm compression
Marking:
Range name on front cover, Model, Max pressure, Max temperature and product information on data plate on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2029
Model:
Models without a filing loop supplied: 0010016113 - Glow-worm ESSENTIAL 24c -A (H-GB) 0010016115 - Glow-worm ESSENTIAL 28c -A (H-GB) 0010016127 - Heatline CAPRIZ 2 24c -A (H-GB) 0010016128 - Heatline MONZA 2 24c -A (H-GB) 0010016129 - Heatline CAPRIZ 2 28c -A (H-GB) 0010016130 - Heatline MONZA 2 28c -A (H-GB) 0010021401 - Glow-worm EASICOM 3 24c -A (H-GB) 0010021402 - Glow-worm EASICOM 3 28c -A (H-GB) 0010020392 - Vaillant VUW 256/6-3 (H-GB) ecoFIT sustain 825 0010020393 - Vaillant VUW 306/6-3 (H-GB) ecoFIT sustain 830 0010020394 - Vaillant VUW 356/6-3 (H-GB) ecoFITsustain 835 Models with a filling loop supplied: 0010020389 - Vaillant VUW 256/6-3 (H-GB) ecoFIT pure 825 0010020390 - Vaillant VUW 306/6-3 (H-GB) ecoFIT pure 830 0010020391 - Vaillant VUW 356/6-3 (H-GB) ecoFIT pure 835 0010019813 - Vaillant VUW 306/6-3 (P-GB) ecoFIT pure 830 P 0010021204 - Glow-worm BETACOM 4 24c -A (H-GB) 0010021205 - Glow-worm BETACOM 4 30c -A (H-GB) 0010021404 - Glow-worm ULTIMATE 3 30c -A (H-GB) 0010021405 - Glow-worm ULTIMATE 3 35c -A (H-GB) 0010027591 - Glow-worm ENERGY 2 30c -A (P-GB) 0010035896 - Glow-worm ENERGY 7 25c (H-GB) 0010035897 - Glow-worm ENERGY 7 30c (H-GB) 0010035898 - Glow-worm ENERGY 7 35c (H-GB)
Product Images

Approval Holder:
Vaillant GmbH
Company Name
Vaillant GmbH
Address
Berghauser Strasse, 40 D-42859 Remscheid
Country
Germany
Phone
Tel: +49 2191 182126

View All Listings by this Company

Print This Approval


#240704704

Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240704704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)
Marking:
Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing
JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.
Product Images

Approval Holder:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company
Manufacturer:
Guangdong Vanward New Electric Co. Ltd.
Company Name
Guangdong Vanward New Electric Co. Ltd.
Address
13 Jianye Mid- Road Shunde High Tech Industry Development Zone
Country
Ronggui Shunde

View All Listings by this Company

Print This Approval


#240206701

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240206701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).
Marking:
Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
28/02/2029
Model:
1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:
Xylem Service Italia S.r.l
Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company
Manufacturer:
Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.
Company Name
Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.
Address

View All Listings by this Company

Print This Approval


#240602708

Range of single or twin booster pumps with stainless steel bodies and stainless-steel impellers. Maximum working pressure 8.0 Bar Maximum operating temperature 90.0°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240602708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSPT F 1 ¼” BSPT F 1 ½” BSPT F
Marking:
EBARA logo, model number with additional technical data on adhesive label on body
Installation Requirements:
R001 R415
Expiry date:
30/06/2029
Model:
1970056704I CDE/I 70/05 IE3 1970096604I CDE/I 70/07 IE3 1980096604I CDE/I 120/07 IE3 1980096614I CDE/I 120/106 220/380-460 IE3 1980206604I CDE/I 120/20 IE3 1970106604I CDE/I 90/10 IE3 1970106804I CDE/I 70/12 IE3 1980106604I CDE/I 120/12 IE3 1990106604I CDE/I 200/12 IE3 1990206604I CDE/I 200/20 IE3 1990256604I CDE/I 200/25 IE3 1970056600E CDME/E 70/05 IE2 1970096600E CDME/E 70/07 IE2 1970106600E CDME/E 70/12 IE2 1970106800E CDME/E 90/10 IE2 1980096600E CDME/E 120/07 IE2 1980106600E CDME/E 120/12 IE2 1980206600E CDME/E 120/20 IE2 1990106600E CDME/E 200/12 IE2 1990206600E CDME/E 200/20 IE2 1610036616I CDXE/I 70/076 220/380-460_60 IE3 1610036716I CDXE/I 70/076 220/380-460_60 SCAIE3 1610056616I CDXE/I 70/106 220/380-460_60 IE3 1610056716I CDXE/I 70/106 220/380-460_60 SCA IE3 1610075216I CDXE/I 70/156 220/380-460_60 1615056604I CDXE/I 70/05 IE3 1615056904I CDXE/I 70/05 SCA IE3 1615096504I CDXE/I 70/07 SCA IE3 1615096604I CDXE/I 70/07 IE3 1615106604I CDXE/I 90/10 IE3 1615109704I CDXE/I 90/10 SCA IE3 1620056616I CDXE/I 120/106 220/380-460_60 IE3 1620056716I CDXE/I 120/106 220/380-460_60 SCA IE3 1610075316I CDXE/I 70/156 220/380-460_60 SCA 1620076616I CDXE/I 120/156 220/380-460_60 1620076716I CDXE/I 120/156 220/380-460_60 SC 1620086516I CDXE/I120/206 220/380-460_60 SCA 1625096604I CDXE/I 120/07 IE3 1625096704I CDXE/I 120/07 SCA IE3 1625106304I CDXE/I 120/12 IE3 SCA 1625106604I CDXE/I 120/12 IE3 1625106904I CDXE/I 120/12 SCA IE3 1625206304I CDXE/I 120/20 IE3 SCA 1625206604I CDXE/I 120/20 IE3 1630076616I CDXE/I 200/156 220/380-460_60 1630086616I CDXE/I 200/206 220/380-460_60 1630086716I CDXE/I200/206 220/380-460_60SCA 1630106616I CDXE/I 200/306 220/380-460_60 1630106716I CDXE/I 200/306 220/380-460_60SCA 1635106604I CDXE/I 200/12 IE3 1635106704I CDXE/I 200/12 SCA IE3 1635206604I CDXE/I 200/20 IE3 1635206704I CDXE/I 200/20 SCA IE3 1635256604I CDXE/I 200/25 IE3 1635256704I CDXE/I 200/25 SCA IE3 1610036610E CDXME/E 70/076 220-230_60 IE2 1610056610E CDXME/E 70/106 220-230_60 IE2 1615057400E CDXME/E 70/05 IE2 1615096600E CDXME/E 70/07 IE2 1615106600E CDXME/E 90/10 IE2 1625096600E CDXME/E 120/07 IE2 1625106600E CDXME/E 120/12 IE2 1625206600E CDXME/E 120/20 IE2 1635106600E CDXME/E 200/12 IE2 1635206600E CDXME/E 200/20 IE2 1611106504I 2CDXE/I 70/10 SCA IE3 1611106510I 2CDXE/I 70/106 220/380-460_60 1611106600E 2CDXEM/E 70/10 IE2 1611106604I 2CDXE/I 70/10 IE3 1611106610I 2CDXE/I 70/106 220/380-460_60 SCA 1611126600E 2CDXEM/E 70/12 IE2 1611126604I 2CDXE/I 70/12 IE3 1611126704I 2CDXE/I 70/12 SCA 1611150200E 2CDXEM/E 70/15 IE2 1611156404I 2CDXE/I 70/15 SCA 1611156604I 2CDXE/I 70/15 IE3 1611206600E 2CDXEM/E 70/20 IE2 1611206604I 2CDXE/I 70/20 IE3 1611206804I 2CDXE/I 70/20 SCA IE3 1619206916I 2CDXE/I70/206 220/380-460_60 SCA 1619207516I 2CDXE/I 70/206 220/380-460_60 1619300214I 2CDXE/I 70/306 220/380-460_60 SCA 1619306614I 2CDXE/I 70/306 220/380-460_60 1621150200E 2CDXEM/E 120/15 IE2 1621156600E 2CDXEM/E 120/15 IE2 1621156604I 2CDXE/I 120/15 IE3 1621159604I 2CDXE/I 120/15 SCA 1621206600E 2CDXEM/E 120/20 IE2 1621206604I 2CDXE/I 120/20 IE3 1621206616I 2CDXE/I 120/206 220/380-460_60 1621206716I 2CDXE/I 120/206 220/380-460_60 SCA 1621209604I 2CDXE/I 120/20 SCA IE3 1989306316I 2CDXE/I 120/306 220/380-460_60 1989306404I 2CDXE/I 120/30 IE3 SCA 1989306604I 2CDXE/I 120/30 IE3 1989306816I 2CDXE/I120/306 220/380-460_60SCA 1989400206I 2CDXE/I 120/406 220/380-460_60 1989400216I 2CDXE/I 120/406 220/380-460_60 SCA 1989406604I 2CDXE/I 120/40 IE3 1989406704I 2CDXE/I 120/40 IE3 SCA 1999306604I 2CDXE/I 200/30 IE3 1999309604I 2CDXE/I 200/30 SCA IE3 1999400206I 2CDXE/I 200/406 220/380-460_60 1999406604I 2CDXE/I 200/40 IE3 1999409604I 2CDXE/I 200/40 SCA IE3 1999500206I 2CDXE/I 200/506 220/380-460_60 1999500216I 2CDXE/I 200/506 220/380-460_60 SCA 1999506604I 2CDXE/I 200/50 IE3 1999509604I 2CDXE/I 200/50 IE3 SCA 1999400216I 2CDXE/I 200/406 220/380_460_60SCA 1611100206E 2CDXME/E 70/106 220-230_60 IE2
Product Images

Approval Holder:
Ebara Pumps Europe S.p.A.
Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company
Manufacturer:
Ebara Pumps Europe S.p.A.
Company Name
Ebara Pumps Europe S.p.A.
Address
Via Campo Sportivo, 30 – 38023 Cles (TN)
Country
Italy
Phone
0039 444 706 811

View All Listings by this Company

Print This Approval


#240704724

Range of single or twin shower pumps with brass bodies, brass impeller supplied with flexible connection hoses that incorporate servicing valves. Maximum Working pressure 6 Bar Maximum operating temperature 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240704724
Size:
ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). OEM 44741: Monsoon U4.5 bar Single: ¾” BSP (M) (inlet/outlet) (No hose provided). All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).
Marking:
Adhesive label on body stating Stuart Turner, model no, serial no, part no, pressure rating, Monsoon, Manufacturer address and other technical information Expansion vessel labelled with volume and pressure rating
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
46505: Monsoon U1.5 bar Twin, 46498: Monsoon U2.0 bar Single, 46480: Monsoon U2.0 bar Twin, 46414: Monsoon U4.5 bar Single, 46413: Monsoon U3.0 bar Single, 46412: Monsoon U4.5 bar Twin, 46411: Monsoon U4.0 bar Twin, 46410: Monsoon U3.0 bar Twin, OEM 44741: Monsoon U4.5 bar Single, 44427: Monsoon U3.0 bar Twin, 44426: Monsoon U2.0 bar Twin, 44425: Monsoon U2.0 bar Single, OEM 44340: Monsoon U2.0 bar Twin, 44753: Monsoon U1.5 bar Twin, 46505ROI: Monsoon U1.5 bar Twin, 46498ROI: Monsoon U2.0 bar Single, 46480ROI: Monsoon U2.0 bar Twin, 46414ROI: Monsoon U4.5 bar Single, 46413ROI: Monsoon U3.0 bar Single, 46412ROI: Monsoon U4.5 bar Twin, 46411ROI: Monsoon U4.0 bar Twin, 46410ROI: Monsoon U3.0 bar Twin, 46505EXP: Monsoon U1.5 bar Twin, 46498EXP: Monsoon U2.0 bar Single, 46480EXP: Monsoon U2.0 bar Twin, 46414EXP: Monsoon U4.5 bar Single, 46413EXP: Monsoon U3.0 bar Single, 46412EXP: Monsoon U4.5 bar Twin, 46411EXP: Monsoon U4.0 bar Twin, 46410EXP: Monsoon U3.0 bar Twin.
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#241008001

Range of overhead shower outlets with (brass bodies – various finishes) incorporating stainless-steel filter washers at the inlet. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
241008001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
1/2" BSP (F)
Marking:
Moon Shower on connection.
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
MS-TRB064CP, MS‐TRB002CP, MS‐TRB004CP, MS‐TRB010CP, MS-TRB010DYB (Matte Black), MS‐TRB012CP, MS‐TRB013CP, MS‐TRB077CP, MS‐TRB078CP, MS‐TRB079CP, MS‐TSB009CP, MS‐TSB012CP, MS‐TSB014CP, MS‐TSB015CP, MS‐TSB052CP, MS‐TSB053CP, MS‐TSB065CP, MS‐TSB066CP, MS‐TSB067CP, MS-TSB003CP, MS-TRB051XQ, MS-TRB052XQ, MS-TRB053XQ, MS-TRT003XQ, MS-TRT005XQ, MS-TRT012XQ, MS-TRT013XQ, MS-TRT014XQ, MS-TRT041XQ, MS‐TSB044XQ, MS‐TSB045XQ, MS‐TSB046XQ, MS‐TST013XQ, MS‐TST019XQ, MS‐TST035XQ, MS‐TST036XQ, MS‐TST037XQ, MS-TST032XQ, MS-TST053XQ, MS-TST080XQ.
Product Images

Approval Holder:
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Company Name
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Country
China

View All Listings by this Company
Manufacturer:
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Company Name
Jiangmen Moon Shower Sanitaryware Co., Ltd.
Country
China

View All Listings by this Company

Print This Approval


#240708002

shower handset with various finishes. Model HS149 incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240708002
Size:
See models.
Marking:
Bristan on shower head
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
HS318 - ½” BSP (M)

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2304103

Range of overhead shower outlets (chromium plated ABS plastic bodies). Incorporating a combined EPDM washer and stainless-steel strainer on the inlet (all other models). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304103
Size:
½” BSP (F).
Marking:
‘Bristan’ on body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
FHC ABSQ01 C RP3 FHC ABSQ01 C 144360 Models Added February 2025: FHC ABSQ01 BLK (black) FHC ABSQ01 BB (brushed brass)

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240802003

Range of shower handsets and overhead showers with (plastic or chrome plated plastic bodies). Open Outlet use only Maximum operating temperature 75.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240802003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M) - All other models ½” Captive nut - G50013-2C06, G07011-2C14 and G06011-2C24
Marking:
XIHE on front of body or captive nut
Installation Requirements:
R001 R040
Expiry date:
31/08/2029
Model:
S13034-2C02 S16073-2C03 S99023-2C02 S101015-2C02 S10023-2C02 S10035-2C02 S16023-2C04 S17023-2C02 S04244-2C02 G06011-2C24 G07011-2C14 G50013-2C06 S33011-2C11 S81011-2C02 S10011-2C02 S13041-2C01 S16031-1F02 Model added November 2024 S16061-2C03

Approval Holder:
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company
Manufacturer:
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company

Print This Approval


#2201103

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The MBHU04DCV model incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union tap(s).
WRAS Approval Number:
2201103
Size:
½” BSP (M).
Marking:
MF, Size & WRAS on body model MBHU04DCV also has CR on body.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
Brass body: MBHU04 DZR brass body: MBHU04DCV

Approval Holder:
Masterflow Products Limited
Company Name
Masterflow Products Limited
Address
Globall House 95 Vantage Point West Mindlands
Postcode
DY6 7FT
Country
United Kingdom

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 87 of 125

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.