Range of VEGAPULS radar sensors for level measurement with plastic bodies. Cold water use only. Open outlet use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model key

Marking:

VEGA logo date of manufacturer (YYYY), serial number and other technical data on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

PSC21.ab-c-d-N-f-g-h-I VEGAPULS C 21 PSC22.ab-c-d- N -f-g-h-I VEGAPULS C 22 PSC23.ab-c-d- N -f-g-h-I VEGAPULS C 23 PS21.ab-c-d- N -f-g-h-I VEGAPULS 21 PS31.ab-c-d- N -f-g-h-I VEGAPULS 31 KEY FOR VEGAPULS C 21 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; G Thread G1½ / G1 N Thread 1½NPT / 1NPT R Thread R1½ / R1 g = Cable material / Length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 22 ab = Explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignition proof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as: X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 23 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; F Thread G1 M Thread 1NPT Q Thread R1 g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS 21 / 31 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) AX without, for Ex-free area (CE, UKCA, RCM) VC ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) SC EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 TC CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 WC INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 c = Approved as overfill protection, which can be displayed as; X Without W With (WHG, VLAREM) d = Ship approval, which can be displayed as; X Without S With (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff/Pharmaceutical certificate, which can be displayed as X Without N With (NSF/ANSI/CAN 61) P With (NIH) F With (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable entry / connection, which can be displayed as; M M20x1.5 / Cable gland PA black (ø5-9mm), standard h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART i = Sensor setting via smartphone and VEGA Tools app X Without B With

Product Images

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Manufacturer:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm Spigot inlet x 1/2" BSP (M) outlet

Marking:

Y Stern logo on sensor unit

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Product Images

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of test port assemblies with DZR brass bodies. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” ULF (15mm ULF), ½” LF (15mm LF), ½” (15mm), ¾” (20mm), 1” (25mm), 1”1/4” (32mm), 1”1/2” (40mm), 2” (50mm).

Marking:

RUBINETTERIE logo, flow arrow, thread size, DN, PN, DR and batch number on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

B-Heat - 200402.

Product Images

Approval Holder:

Rubinetterie Bresciane Bonomi S.p.A

Company Name

Rubinetterie Bresciane Bonomi S.p.A

Address

Via Massimo Bonomi, 1 Gussago (BS)

Postcode

25064

Country

Italy

Phone

+39 030 82 50 212

View All Listings by this Company

Manufacturer:

Rubinetterie Bresciane Bonomi S.p.A

Company Name

Rubinetterie Bresciane Bonomi S.p.A

Address

Via Massimo Bonomi, 1 Gussago (BS)

Postcode

25064

Country

Italy

Phone

+39 030 82 50 212

View All Listings by this Company

Self-closing hand spray with a stainless-steel body. The inlet incorporates a flow regulator and an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5 bar. Max operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241004710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M)

Marking:

T-Safe on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

02-803200 Kitchen Spray filter

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of horizontal multistage close coupled centrifugal pumps incorporating stainless steel cased bodies and impellers. Maximum working pressure: See models. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241004726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F) - 3” BSP (F). DN40 - DN80 flange.

Marking:

Calpeda and technical info on data plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

MXH Series: (304 stainless models) MXH/MXHM 202, 203, 204, 205, 206 – 1 ¼” x 1” – 8 bar. MXH/MXHM 402, 403, 404, 405, 406 – 1 1/2” x 1” – 8 bar. MXH/MXHM 802, 803, 804, 805 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXHM 1602, 1603, 1604, 1605, 1606 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXH-F 2001, 2002, 2003, 2004, 2005 – 2 ¼” x 1 1/2” – 10 bar. MXH/MXH-F 3201, 3202, 3203, 3204 – 2 1/2” x 2” – 10 bar. MXH/MXH-F 4801, 4802, 4803 – 3” x 2 1/2” – 10 bar. (316 stainless models) MXHL/MXHLM 202, 203, 204, 205, 206 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 402, 403, 404, 405, 406 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 802, 803, 804, 805 - 1 1/2” x 1” – 8 bar. ‘F’ in the code indictates flanged connection. There are four numbers to identify pump’s size: the first two indicate the flow rate (in m3/h); the second two indicate the number of stage (ex. Mxh 3204: 32 m3/h, 4 stages; mxh 203: 2 m3/h, 3 stages) A letter may be added at the end of the pump model to identify the current motor model fitted to the pump e.g. MXH203* where * can be E, /A, /B, /C etc. Example MXH203/A, MXH204/B etc.

Product Images

Approval Holder:

Calpeda S.p.A

Company Name

Calpeda S.p.A

Address

Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza

Country

Italy

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Pentax logo, model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Manufacturer:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

LEO on cover. LEO, model & technical information on date label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Product Images

Manufacturer:

Leo Group Pump(Zhejiang) Co., Ltd

Company Name

Leo Group Pump(Zhejiang) Co., Ltd

Address

No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

Range of overhead shower outlets with Various finishes. The inlets incorporate a stainless-steel strainer and flow regulator. Models 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ Incorporates a shower arm.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310168

Note:

Open outlet use only.

Size:

½” BSP F ½” BSP M Stainless Steel Braided PEX lined hose ½” BSP captive nut

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

IX200, 23200BBR, 27200BBL, 28200MB, 21200BRZ, IX250, 23250BBR, 27250BBL, 28250MB, 21250BRZ, IX300, 23300BBR, 27300BBL, 28300MB, 21300BRZ, 32250, 38250MB, 33250BBR, 37250BBL, 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306090

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

IXGL200 (INOX STAINLESS STEEL ROUND SLIM GLIDE OVERHEAD SHOWER 200mm) IXGL300 (INOX STAINLESS STEEL ROUND SHOWERHEAD 300mm) GLR200 (GLIDE SLIM ROUND OVER HEAD SHOWER 200) GLR250 (GLIDE SLIM ROUND OVER HEAD SHOWER 250) GLR300 (GLIDE SLIM ROUND OVER HEAD SHOWER 300) GLR400 (GLIDE SLIM ROUND OVER HEAD SHOWER 400) GLS200 (GLIDE SLIM SQUARE OVERHEAD SHOWER 200 x 200) GLS250 (GLIDE SLIM SQUARE OVERHEAD SHOWER 250 x 250) GLS300 (GLIDE SLIM SQUARE OVERHEAD SHOWER 300 x 300) GLS400 (GLIDE SLIM SQUARE OVERHEAD SHOWER 400 x 400) 28200MB (VOS ROUND SHOWER HEAD 200MM MATT BLACK) 28250MB (VOS ROUND SHOWER HEAD 250MM MATT BLACK) 28300MB (VOS ROUND SHOWER HEAD 300MM MATT BLACK) L9901 (BOKER ROUND OVERHEAD SHOWER 200mm) 9201 (ROUND RAIN SHOWER 300mm) E044015 (ESPRITE OVERHEAD SHOWER 200mm) 38CM400MB (HIX CEILING MOUNTED400MM OVERHEAD SHOWER MATT BLACK) 33CM400BBR (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BRASS) 37CM400BBL (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BLACK)

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Range of multilayer PVC hoses. Maximum operating temperature 65°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

241004022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (F) x 1/2” BSP (F)

Marking:

Justlink, WRAS, manufactuer year (YYYY) etched on shower nut

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

JL-A*B-OD-X-B Black plastic shower hose JL-A*B-OD-X-W White plastic shower hose JL-A*B-OD-X-G Golden plastic shower hose JL-A*B-OD-X-Gr Grey plastic shower hose JL-A*B-OD-X-S Silver plastic shower hose JL-A*B-OD-X-P Pink plastic shower hose JL-A*B-OD-X-Ndr Nickel-drawing plastic shower hose JL-A*B-OD-X-C-XXX A denotes end connection and is replaced with: A1 = F½” Swivel nut. A2 = F½” Fixed nut. A3 = F½” swivel nut with O‐ring. A4 = F½” round nut. B denotes end connection and is replaced with: B1 = F½” Swivel nut. B2 = F½” Fixed nut. B3 = F½” swivel nut with O‐ring. B4 = F½” round nut. OD denotes external diameter of hose and is replaced with: 14 and 16, 14 denotes OD14, 16 denotes OD16. X denotes the internal liner material PEX. C denotes the color of the external layer of shower hose and is replaced with: B = Black W = White G = Golden Gr = Grey S = Silver P = Pink Ndr = Nickel Drawing(brushed nickel) XXX denotes the length in centimetre between 050 and 200.

Product Images

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

View All Listings by this Company