CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

(XPW)(i)(ii)-(iii) and (XPWA)(i)(ii)-(iii) ranges. Where: XPW or XPWA = range name. (i) = Nominal flow in m³/h x 10 (3, 5 or 9). (ii) = Number of stages x 10 (040-100). (iii) = Voltage/motor speed (M = single phase 230V, T = Three phase 400V, T230 = Three phase 230V. All of which can also be prefixed with 6 for 60Hz motor speed. Std. is 50Hz). Example codes: XPW3040-M & XPWA9090-T230.

FH ABSQ02C & FH ABRD02C

SAW148, SAW320, ARMW02 & ARMW05.

P22000 & P22200

HAND129 HAND128

38746

G00.xxx.281EP/W Where xxx will be replaced by the following finishes A01 - Poli A02 - Chromé B01 - Nickel brilliant C01 - Nickel mat C02 - Chromé mat C03 - Chromé satiné C05 - Nickel satiné C47 - Nickel Fumé D01 - Bronze clair D05 - Bronze clair mat D13 - Carbon D24 - Aranja F01 - Doré brillant F03 - Doré satiné F07 - Doré mat non vernis F18 - Argent Rhodié F19 - Argent mat Rhodié F27 - Or rose F30 - Or pâle F31 - Or pâle mat F32 - Or pâle satiné F33 - PVD couleur bronze F34 - PVD couleur bronze brown H03 - Vieil argent brillant H06 - Cuivre rouge mat H07 - Vieux cuivre rouge mat H17 - Aranja mat H21 - Cuivre rouge non verni H24 - Vieux cuivre rouge brillant H27 - Bronze satiné H28 - Vieux nickel H30 - Vieil argent mat non verni H49 - PVD couleur laiton H50 - PVD couleur laiton mat H52 - PVD couleur doré H53 - PVD couleur doré mat H55 - PVD couleur nickel H56 - PVD couleur nickel mat H60 - PVD couleur blush mat H62 - PVD couleur blush H64 - PVD couleur graphite H65 - PVD couleur graphite mat H66 - PVD couleur amber H67 - PVD couleur umber mat

27.220 Euphoria 110 Duo hand shower 27.221 Euphoria 110 Massage hand shower

Vernis Blend Hand shower Vario range: 26 270 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.