Range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *‐KJ600304 and *-KJ600316 stainless steel pipes. The "KJ6278" prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

KONJOY, size, WRAS and material grade on fitting body. WRAS, KONJOY, size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: KJ625015005: 15×Rp½. KJ625018005: 18×Rp½. KJ625022075: 22×Rp¾. Adapter with female thread: KJ627115005: 15×Rp½. KJ627118005: 18×Rp½. KJ627122075: 22×Rp¾. KJ627128001: 28×Rp1. KJ627135125: 35×Rp1¼. KJ627142105: 42×Rp1½. KJ627154002: 54×Rp2. Bridge with plain ending: KJ608500018: 18. KJ608500022: 22. KJ608500028: 28. Cap: KJ621100015: 15. KJ621100018: 18. KJ621100022: 22. KJ621100028: 28. KJ621100035: 35. KJ621100042: 42. KJ621100054: 54. KJ621100076: 76.1. KJ621100089: 88.9. KJ621100108: 108. Elbow 45 with press ending: KJ604500015: 15. KJ604500018: 18. KJ604500015: 22. KJ604500028: 28. KJ604500035: 35. KJ604500042: 42. KJ604500054: 54. KJ604500076: 76.1. KJ604500089: 88.9. KJ604500108: 108. Elbow 45 with plain ending: KJ614500015: 15. KJ614500018: 18. KJ614500022: 22. KJ614500028: 28. KJ614500035: 35. KJ614500042: 4 KJ614500054: 54. KJ614500076: 76.1. KJ614500089: 88.9. KJ614500108 -108. Elbow 90 with press ending KJ609600015: 15. KJ609600018: 18. KJ609600022: 22. KJ609600028: 28. KJ609600035: 35. KJ609600042: 42. KJ609600054: 54. KJ609600067: 66.7. KJ609600076: 76.1. KJ609600089: 88.9. KJ609600108 -108. Elbow 90 with female thread: KJ623015005: 15×Rp½. KJ623018005: 18×Rp½. KJ623022075: 22×Rp¾. KJ623028001: 28×Rp1. KJ623035125 : 35×Rp1¼. KJ623042105: 42×Rp1½. KJ623054002: 54×Rp2. Elbow: 90 with: male thread: KJ624015005: 15×R½. KJ624018005: 18×R½. KJ624022075: 22×R¾ Elbow 90 with plain ending: KJ619100015: 15. KJ619100018: 18. KJ619100022: 22. KJ619100028: 28. KJ619100035: 35. KJ619100042: 42. KJ619100054: 54. KJ619100076: 76.1. KJ619100089: 88.9. KJ619100108: 108. Reducer coupling with plain ending: KJ624301815: 18×15. KJ624302218: 22×18. KJ624302818: 28×18. KJ624303522: 35×22. KJ624303528: 35×28. KJ624304222: 42×22. KJ624304228: 42×28. KJ624304235: 42×35. KJ624305428: 54×28. KJ624305435: 54×35. KJ624305442: 54×42. Reducer coupling with press ending: KJ624401815: 18×15. KJ624402215: 22×15. KJ624402218: 22×18. KJ624402815: 28×15. KJ624402818: 28×18. KJ624402822: 28×22. KJ624403515: 35×15. KJ624403518: 35×18. KJ624403522: 35×22. KJ624403528: 35×28. KJ624404215: 42×15. KJ624404218: 42×18. KJ624404222: 42×22. KJ624404228: 42×28. KJ624404235: 42×35. KJ624405415: 54×15. KJ624405418: 54×18. KJ624405422: 54×22. KJ624405428: 54×28. KJ624405435: 54×35. KJ624405442: 54×42. KJ624406735: 66.7×35. KJ624406754: 66.7×54. KJ624407654: 76.1×54. KJ624408954: 88.9×54. KJ624408976: 88.9×76.1. KJ624410854: 108×54. KJ624410876: 108×76.1. KJ624410889: 108×88.9. Reducer Tee with press ending: KJ613301815: 18×15×18. KJ613302215: 22×15×22. KJ613302218: 22×18×22. KJ613302815: 28×15×28. KJ613302818: 28×18×28. KJ613302822: 28×22×28. KJ613303522: 35×22×35. KJ613303528: 35×28×35. KJ613304222: 42×22×42. KJ613304228: 42×28×42. KJ613304235: 42×35×42. KJ613305422: 54×22×54. KJ613305428: 54×28×54. KJ613305435: 54×35×54. KJ613305442: 54×42×54. KJ613307642: 76.1×42×76.1. KJ613307654: 76.1×54×76.1. KJ613308954: 88.9×54×88.9 KJ613310854: 108×54×108. KJ613310876: 108×76.1×108. KJ613310889: 108×88.9×108 Equal coupling with press ending: KJ623700015: 15. KJ623700018: 18. KJ623700022: 22 KJ623700028: 28. KJ623700035: 35. KJ623700042: 42. KJ623700054: 54. KJ623700067: 66.7. KJ623700076: 76.1. KJ623700089: 88.9. KJ623700108: 108 Adapter with male thread: KJ627215005: 15×R½. KJ627218005: 18×R½. KJ627218075: 18×R¾. KJ627222005: 22×R½. KJ627222075: 22×R¾. KJ627228001: 28×R1. KJ627235125: 35×R1¼. KJ627242105: 42×R1½. KJ627254002: 54×R2. KJ627276205: 76.1×R2½. KJ627289003: 88.9×R3. Slip coupling with press ending: KJ627100015: 15. KJ627100018: 18. KJ627100022: 22. KJ627100028: 28. KJ627100035: 35. KJ627100042: 42 KJ627100054: 54. Tee with press ending: KJ613012015: 15. KJ613012018: 18. KJ613012022: 22. KJ613012028: 28. KJ613012035: 35. KJ613012042: 42. KJ613012054: 54. KJ613012076: 76.1. KJ613012089: 88.9. KJ613012108: 108. Tee with male thread: KJ613815005: 15×R½. KJ613818005: 18×R½. KJ613822005: 22×R½. KJ613822075: 22×R¾. KJ613828005: 28×R½. KJ613828075: 28×R¾. KJ613828001: 28×R1. KJ613835105: 35×R½. KJ613835125: 35×R1¼. KJ613842125: 42×R1¼. KJ613854105: 54×R1½. KJ613854002: 54×R2. Tee with female thread:: KJ613915005: 15×Rp½. KJ613918005: 18×Rp½. KJ613922005: 22×Rp½. KJ613922075: 22×Rp¾. KJ613928005: 28×R½. KJ613928075: 28×Rp¾. KJ613928001: 28×Rp1. KJ613935005: 35×Rp½. KJ613935125: 35×Rp1¼. KJ613942125: 42×Rp1¼. KJ613954105: 54×1½. KJ613954002: 54×Rp2. Adaptor with union nut: KJ627815005: 15×G½. KJ627818005: 18×G½. KJ627818075: 18×G¾. KJ627822005: 22×G½. KJ627822075: 22×G¾. KJ627822001: 22×G1. KJ627828001: 28×G1. KJ627835125: 35×G1¼. KJ627842175: 42×G1¾. KJ627854002: 54×G2. Stainless steel pipe (SS304 or SS316L): *‐KJ600304 (SS304) *-KJ600316 (SS316L) Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 66.7, 76.1, 88.9, 108).

Product Images

Approval Holder:

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Company Name

Wenzhou Konjoy Fluid Control Tech Co., Ltd.

Address

1st Floor, No. 222, Binhai Industrial Zone, 2nd Road, Xinghai Sub‐district, Longwan District, Wenzhou, Zhejiang

Country

China

Phone

0086‐577‐86896059

General Email

info@konjoy‐tech.com

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251188701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14mm

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1058085 Uponor Uni-C compression adapter MLC 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 1014886 UPONOR S‐PRESS TEE 1015154 UPONOR S‐PRESS COUPLING 1015437 Uponor S-Press tap elbow 1133445 Uponor S-Press elbow 1133446 Uponor S-Press tap elbow twin 90deg long 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 1014511 UPONOR S‐PRESS ADAPTER 1013366 Uponor Uni Pipe PLUS white 1013577 Uponor Uni Pipe PLUS white insulated 1013678 Uponor Uni Pipe PLUS white in conduit 1160885 Uponor Uni Pipe PLUS white insulated

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251012009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Hengsheng logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.

Product Images

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Address

No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

‘Fastwarm’ range of U profile press fittings (nickel plated brass bodies) for use with ‘Fastwarm’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704745

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

Fastwarm on body Fastwarm, size, WRAS and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union FW-KY101-S1616 S16X16 FW-KY101-S2020 S20X20 FW-KY101-S2525 S25X25 FW-KY101-S3232 S32X32 Unequal Straight Union FW-KY102-S2016 S20X16 FW-KY102-S2516 S25X16 FW-KY102-S2520 S25X20 FW-KY102-S3216 S32X16 FW-KY102-S3220 S32X20 FW-KY102-S3225 S32X25 Male Straight Union FW-KY103-S1612M S 16X1/2M FW-KY103-S1634M S 16X3/4M FW-KY103-S2012M S 20X1/2M FW-KY103-S2034M S 20X3/4M FW-KY103-S2512M S 25X1/2M FW-KY103-S2534M S 25X3/4M FW-KY103-S2511M S25X1M FW-KY103-S3234M S 32X3/4M FW-KY103-S3211M S 32X1M Female Straight Union FW-KY104-S1612F S 16X1/2 F FW-KY104-S1634F S 16X3/4 F FW-KY104-S2012F S 20X1/2 F FW-KY104-S2034F S 20X3/4 F FW-KY104-S2534F S 25X3/4 F FW-KY104-S2511F S 25X1 F FW-KY104-S3234F S 32X3/4 F FW-KY104-S3211F S 32X1 F Swivel Coupling FW-KY105-1612F 16X1/2F FW-KY105-2034F 20X3/4F FW-KY105-2012F 20X1/2F FW-KY105-2534F 25X3/4F Equal Elbow FW-KY106-L1616 L 16X16 FW-KY106-L2020 L 20X20 FW-KY106-L2525 L 25X25 FW-KY106-L3232 L 32X32 Female Elbow FW-KY107-L1612F L 16X1/2 F FW-KY107-L1634F L 16X3/4 F FW-KY107-L2012F L 20X1/2 F FW-KY107-L2034F L 20X3/4 F FW-KY107-L2534F L 25X3/4 F FW-KY107-L2511F L 25X1 F FW-KY107-L3211F L 32X1 F Male Elbow FW-KY108-L1612M L16x1/2M FW-KY108-L2012M L20x1/2M FW-KY108-L2034M L20X3/4M FW-KY108-L2534M L25x3/4M FW-KY108-L3211M L32x1M Swivel Elbow FW-KY109-1612F 16X1/2F FW-KY109-2034F 20X3/4F Equal Tee FW-KY110-T161616 T 16X16X16 FW-KY110-T202020 T 20X20X20 FW-KY110-T252525 T 25X25X25 FW-KY110-T323232 T 32X32X32 Unequal Tee FW-KY111-T162016 T 16X20X16 FW-KY111-T201616 T 20X16X16 FW-KY111-T201620 T20X16X20 FW-KY111-T202016 T20X20X16 FW-KY111-T251625 T 25X16X25 FW-KY111-T252516 T 25X25X16 FW-KY111-T251616 T25X16X16 FW-KY111-T252020 T 25X20X20 FW-KY111-T252025 T 25X20X25 FW-KY111-T321632 T32X16X32 FW-KY111-T322032 T32X20X32 FW-KY111-T322525 T32X25X25 FW-KY111-T322532 T32X25X32 Female Tee FW112-T2512F25 T25X1/2FX25 Elbow With Plate-Male FW-KY114-1612M 16X1/2M FW-KY114-1634M 16X3/4 M FW-KY114-2034M 20X3/4 M Elbow with Plate-Female FW-KY115-1612F 16X1/2 F FW-KY115-1634F 16X3/4F FW-KY115-2012F 20X1/2F FW-KY115-2034F 20X3/4F End cap FW-KY116-16 16 FW-KY116-20 20 FW-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. PERTPIPE50M 16*2.0 PERTPIPE60M 16*2.0 PERTPIPE70M 16*2.0 PERTPIPE 80M 16*2.0 PERTPIPE90M 16*2.0 PERTPIPE100M 16*2.0 PERTPIPE110M 16*2.0 PERTPIPE120M 16*2.0 PERTPIPE150M 16*2.0 PERTPIPE200M 16*2.0

Product Images

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company

Range of copper capillary, lead free solder ring and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251012017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Hengsheng logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

SR5090 (90° Elbow Close Ruff C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5092 (90° Street Elbow Close Ruff Ftg×C): 15mm, 22mm, 28mm. 54mm SR5090R (Reducing 90° Elbow C×C): 22mm×15mm, 28mm×22mm, 28mm×15mm. SR5041 (45° Elbow C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5040 (45° Elbow FTG×C): 15mm, 22mm, 28mm. SR5130 (Equal Tee C×C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5130R (Reducing TEE C×C×C): 15mm×15mm×22mm, 15mm×15mm×12mm, 15mm×15mm×10mm, 22mm×22mm×28mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm, 54mm×54mm×15mm, 22mm×15mm×22mm, 22mm×15mm×15mm, 28mm×22mm×28mm, 28mm×22mm×22mm, 28mm×22mm×15mm, 28mm×15mm×28mm, 28mm×15mm×22mm, 28mm×15mm×15mm, 35mm×28mm×28mm. SR5270 (Equal Coupling C×C): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5240 (Reducing Coupling C×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5243 (Fitting Reducer Ftg×C): 10mm×8mm, 12mm×10mm, 12mm×8mm, 15mm×12mm, 15mm×10mm, 15mm×8mm, 22mm×15mm, 22mm×12mm, 22mm×10mm, 28mm×22mm, 28mm×15mm, 28mm×12mm, 35mm×28mm, 35mm×22mm, 35mm×15mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 42mm×15mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm, 54mm×15mm. SR5301 (Tube Cap): 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. SR5085 (Cross Over Coupling C×C): 15mm, 22mm. SR5086 (Partial Cross Over Ftg×C): 15mm, 22mm. SR5062 (Straight Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1". SR5063 (Bent Tap Connector C×FI): 15mm×1/2", 15mm×3/4", 22mm×3/4", 22mm×1", 28mm×1".

Product Images

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Address

No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company