Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Product Images

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251007701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” - 2” BSP (F) or NPT (F) inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

31/10/2030

Model:

CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of wall mounted angled overhead showers, consisting of stainless-steel bodies (various finishes) and silicone nozzles. The inlets are fitted with plastic flow limiters. Maximum operating temperature 65⁰C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250908001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Flow rates declared by manufacturer are not endorsed by WRAS.

Size:

½” BSP (M).

Marking:

Manufacturers logo on the underside of body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

DB3000.a.bbb Where ‘a’ in the above code it will be as a number 1 – 9 to denote the finish i.e.DB3000.1 is a brushed finish, DB3000.2 is a mirror polished finish, ceramic coated etc. Where ‘bbb’ in the above code will be a number 00-999, either 2 or 3 digits to denote the colour of the finish where applicable i.e. DB3000.3.50 is a brushed finish with a gold PVD coating DB3000.6.03 is a black ceramic coating.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250808004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Hansgrohe on the body.

Installation Requirements:

R001 R040

Expiry date:

31/08/2030

Model:

26 469 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with ceiling connector. 26 470 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm. 26 469 400 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets. The inlet incorporates a stainless-steel filter washer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250912015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

SUERDA on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

Round Slim Shower Head: SD42508 - 300mm - Chrome. Square Slim Shower Head: SD42509 - 300mm - Chrome. Square Shower Head: SDH1D121 - 250mm - Chrome, SDH1D121BK - 250mm - Black, SDH1D121BB - 250mm - Brushed Brass. Round Shower Head: TS03301 - 250mm - Chrome, TS03301BK - 250mm - Black, TS03301BB - 250mm - Brushed.

Product Images

Approval Holder:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ZHEJIANG SUERDA SANITARY CO.,LTD.

Company Name

ZHEJIANG SUERDA SANITARY CO.,LTD.

Address

No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang

Country

China

View All Listings by this Company