IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

Country

China

General Email

View All Listings by this Company

Range of end feed copper fittings for use with copper tube manufactured to EN1057, for above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 85℃.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404011

Size:

see models

Marking:

YS, size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

EF STRAIGHT COUPLING C x C: 5270.08 - 8mm 5270.10 - 10mm 5270.12 - 12mm 5270.15 - 15mm 5270.22 - 22mm 5270.28 - 28mm 5270.35 - 35mm 5270.42 - 42mm 5270.54 - 54mm EF SLIP COUPLING C x C: 5270S.08 - 8mm 5270S.10 - 10mm 5270S.12 - 12mm 5270S.15 - 15mm 5270S.22 - 22mm 5270S.28 - 28mm 5270S.35 - 35mm 5270S.42 - 42mm 5270S.54 - 54mm EF REDUCING COUPLING C x C: 5240.1008 - 10mm x 8mm 5240.1508 - 15mm x 8mm 5240.1510 - 15mm x 10mm 5240.1512 - 15mm x 12mm 5240.2210 - 22mm x 10mm 5240.2212 - 22mm x 12mm 5240.2215 - 22mm x 15mm 5240.2810 - 28mm x 10mm 5240.2812 - 28mm x 12mm 5240.2815 - 28mm x 15mm 5240.2822 - 28mm x 22mm 5240.3512 - 35mm x 12mm 5240.3515 - 35mm x 15mm 5240.3522 - 35mm x 22mm 5240.3528 - 35mm x 28mm 5240.4215 - 42mm x 15mm 5240.4222 - 42mm x 22mm 5240.4228 - 42mm x 28mm 5240.4235 - 42mm x 35mm 5240.5415 - 54mm x 15mm 5240.5422 - 54mm x 22mm 5240.5428 - 54mm x 28mm 5240.5435 - 54mm x 35mm 5240.5442 - 54mm x 42mm EF 90DEG ELBOW C x C: 5090.08 - 8mm 5090.10 - 10mm 5090.12 - 12mm 5090.15 - 15mm 5090.22 - 22mm 5090.28 - 28mm 5090.35 - 35mm 5090.42 - 42mm 5090.54 - 54mm EF 90DEG STREET ELBOW F x C: 5092.08 - 8mm 5092.10 - 10mm 5092.12 - 12mm 5092.15 - 15mm 5092.22 - 22mm 5092.28 - 28mm 5092.35 - 35mm 5092.42 - 42mm 5092.54 - 54mm EF 45DEG ELBOW C x C: 5041.08 - 8mm 5041.10 - 10mm 5041.12 - 12mm 5041.15 - 15mm 5041.22 - 22mm 5041.28 - 28mm 5041.35 - 35mm 5041.42 - 42mm 5041.54 - 54mm EF 45DEG STREET ELBOW F x C: 5040.08 - 8mm 5040.10 - 10mm 5040.12 - 12mm 5040.15 - 15mm 5040.22 - 22mm 5040.28 - 28mm 5040.35 - 35mm 5040.42 - 42mm 5040.54 - 54mm EF FITTING REDUCER F x C: 5243.1008 - 10mm x 8mm 5243.1508 - 15mm x 8mm 5243.1510 - 15mm x 10mm 5243.1512 - 15mm x 12mm 5243.2210 - 22mm x 10mm 5243.2212 - 22mm x 12mm 5243.2215 - 22mm x 15mm 5243.2810 - 28mm x 10mm 5243.2812 - 28mm x 12mm 5243.2815 - 28mm x 15mm 5243.2822 - 28mm x 22mm 5243.3512 - 35mm x 12mm 5243.3515 - 35mm x 15mm 5243.3522 - 35mm x 22mm 5243.3528 - 35mm x 28mm 5243.4215 - 42mm x 15mm 5243.4222 - 42mm x 22mm 5243.4228 - 42mm x 28mm 5243.4235 - 42mm x 35mm 5243.5415 - 54mm x 15mm 5243.5422 - 54mm x 22mm 5243.5428 - 54mm x 28mm 5243.5435 - 54mm x 35mm 5243.5442 - 54mm x 42mm EF CAP C x C: 5301.10 - 10mm 5301.12 - 12mm 5301.15 - 15mm 5301.22 - 22mm 5301.28 - 28mm 5301.35 - 35mm 5301.42 - 42mm 5301.54 - 54mm EF EQUAL TEE C x C: 5130.08 - 8mm 5130.10 - 10mm 5130.12 - 12mm 5130.15 - 15mm 5130.22 - 22mm 5130.28 - 28mm 5130.35 - 35mm 5130.42 - 42mm 5130.54 - 54mm EF PART CROSSOVER F x C: 5086.12 - 12mm 5086.15 - 15mm 5086.22 - 22mm EF REDUCING TEE C x C: 5130R.151510 - 15mm x 15mm x 10mm 5130R.151512 - 15mm x 15mm x 12mm 5130R.151522 - 15mm x 15mm x 22mm 5130R.221515 - 22mm x 15mm x 15mm 5130R.221522 - 22mm x 15mm x 22mm 5130R.222215 - 22mm x 22mm x 15mm 5130R.222228 - 22mm x 22mm x 28mm 5130R.282815 - 28mm x 28mm x 15mm 5130R.282822 - 28mm x 28mm x 22mm 5130R.281528 - 28mm x 15mm x 28mm 5130R.281515 - 28mm x 15mm x 15mm 5130R.282215 - 28mm x 22mm x 15mm 5130R.281522 - 28mm x 15mm x 22mm 5130R.282222 - 28mm x 22mm x 22mm 5130R.282228 - 28mm x 22mm x 28mm 5130R.353515 - 35mm x 35mm x 15mm 5130R.353522 - 35mm x 35mm x 22mm 5130R.353528 - 35mm x 35mm x 28mm 5130R.352235 - 35mm x 22mm x 35mm 5130R.352835 - 35mm x 28mm x 35mm 5130R.352815 - 35mm x 28mm x 15mm 5130R.352822 - 35mm x 28mm x 22mm 5130R.352828 - 35mm x 28mm x 28mm 5130R.424215 - 42mm x 42mm x 15mm 5130R.424222 - 42mm x 42mm x 22mm 5130R.424228 - 42mm x 42mm x 28mm 5130R.424235 - 42mm x 42mm x 35mm 5130R.423542 - 42mm x 35mm x 42mm 5130R.423528 - 42mm x 35mm x 28mm 5130R.423535 - 42mm x 35mm x 35mm 5130R.545415 - 54mm x 54mm x 15mm 5130R.545422 - 54mm x 54mm x 22mm 5130R.545428 - 54mm x 54mm x 28mm 5130R.545435 - 54mm x 54mm x 35mm 5130R.545442 - 54mm x 54mm x 42mm 5130R.544254 - 54mm x 42mm x 4mm 5130R.544242 - 54mm x 42mm x 42mm EF 90DEG BEND C x C: 5002.08 - 8mm 5002.10 - 10mm 5002.12 - 12mm 5002.15 - 15mm 5002.22 - 22mm 5002.28 - 28mm 5002.35 - 35mm 5002.42 - 42mm 5002.54 - 54mm EF CROSSOVER C x C: 5085.12 - 12mm 5085.15 - 15mm 5085.22 - 22mm EF 180DEG RETURN BEND C x C: 5060.10 - 10mm 5060.12 - 12mm 5060.15 - 15mm 5060.22 - 22mm 5060.28 - 28mm 5060.35 - 35mm 5060.42 - 42mm 5060.54 - 54mm METRIC IMPERIAL ADAPTOR: 5270G.15X1/2 - 15mm x 1/2" 5270G.22X3/4 - 22mm x 3/4" 5270G.28X1 - 28mm x 1" 5270G.35X1-1/4 - 35mm x 1-1/4" EF REDUCER ELBOW C x C: 5090.22X15 - 22mm x 15mm EF 90DEG STREET BEND F x C: 5001.08 - 8mm 5001.10 - 10mm 5001.12 - 12mm 5001.15 - 15mm 5001.22 - 22mm 5001.28 - 28mm 5001.35 - 35mm 5001.42 - 42mm 5001.54 - 54mm EF STR TAP CONNECTOR: 5240G.15X1/2 - 15mm x 1/2" 5240G.15X3/4 - 15mm x 3/4" 5240G.22X3/4 - 22mm x 3/4" 5240G.22X1 - 22mm x 1" 5240G.28X1 - 28mm x 1" EF BENT TAP CONNECTOR: 5002A.15X1/2 - 15mm x 1/2" 5002A.15X3/4 - 15mm x 3/4" 5002A.22X3/4 - 22mm x 3/4" 5002A.22X1 - 22mm x 1" 5002A.28X1 - 28mm x 1" EF LONG FITTING: L5243.1508 - 15mm x 8mm L5243.1510 - 15mm x 10mm

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of water meters with black epoxy coating bodies, plastic impellers and EPDM ‘O’ rings. Maximum working pressure – 16.0 Bar. Cold water use only.

Section:

1505 Water Meters

Size:

DN50 to DN100 flanged inlet and outlet.

Marking:

Wesan, Diel Metering GmbH and product info on meter face. Wesan logo on meter face cover. Flow arrow and size on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

WESAN WS G DN50/270 DN65/300 DN80/350 DN100/350

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestrasse 13/Am Weimarer Berg 3, 91522 Ansbach/99510 Apolda

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestrasse 13/Am Weimarer Berg 3, 91522 Ansbach/99510 Apolda

Country

Germany

View All Listings by this Company

Ultrims Ultrasonic range of in-line water meters with brass or plastic (-01 suffix models) bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

UL 2.5 & UL 2.5-01 models: ¾” BSP (M). UL 4 & UL 4-01 models: 1” BSP (M). UL 6,3 model: 1¼” BSP (M). UL 25 model: DN50 flanged connection.

Marking:

Powogaz logo, manufacturer’s address and year (YYYY), CE Mark, meter type and other technical information on meter face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Ultrims range: UL 2.5 (port lengths 80, 110 & 165mm), UL 2.5-01 (port lengths 80 & 110mm), UL 4 (port lengths 105, 115, 130 & 190mm), UL 4-01 (port lengths 105 & 130mm), UL 6.3 (port lengths 165 & 260mm), UL 25 (port lengths 200, 270 & 300mm). Models added November 2024: Ultrims Range: UL10 (port length 260mm) UL16 (port length 300mm) Ultrims Neo Range: ULN2.5 (port lengths 80, 110, 115 & 165mm) ULN2.5-01 (port lengths 80, 110 & 165mm) ULN4 (port lengths 105, 115, 130 & 190mm) ULN4-01 (port lengths 105, 115 & 130mm) Models Added April 2025: Ultrimis Neo 6,3 Ultrasonic water meter with brass body. DN25 - Body length [mm]: 165, 260 - G1 ¼ B. Ultrimis Neo 10 Ultrasonic water meter with brass body. DN32 - Body length [mm]: 260 - G1 ½ B Ultrimis Neo 16 Ultrasonic water meter with brass body. DN40 - Body length [mm]: 300 - G2 B Ultrimis Neo 25 Ultrasonic water meter with brass body. DN50 - Body length [mm]: 200, 270, 300 – flanged.

Approval Holder:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Range of water meter housings incorporating DZR brass bodies and a check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1510 Water Meter Manifolds

Size:

see model

Marking:

MWM, flow arrow CR on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

WBBADAPT112-15: 15mm compression, WBBADAPT112-22: 22mm compression, WBBADAPT112-F: ¾” BSP (F).

Approval Holder:

MWM Distributors Ltd

Company Name

MWM Distributors Ltd

Address

Units 52 & 53 Enfield Industrial Estate Windsor Road

Postcode

B97 6DE

Country

Redditch

Phone

+44 (0) 1527 68200

General Email

sales@mwmdistributorltd.com

View All Listings by this Company