Advance Appliance ranges of direct, indirect, solar direct and solar indirect stainless steel insulated unvented hot water storage cylinders with internal expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar 95°C, an inlet manifold consisting of an in-line pressure reducing valve adjustable between 2.7 & 3.3 bar (but factory set @ 3.0 bar), an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a pre-set expansion relief valve set at 6.0 bar and a strainer. The product is supplied with a tundish. Maximum supply pressure to pressure reducing valve is 10.0 bar. Maximum working pressure Primary circuit 6.0 bar. Maximum working pressure Secondary circuit 5.5 bar. Maximum operating temperature 85˚C.
Range of 2, 3 and 4 port manifold assemblies with either DRZ brass or brushed chrome plated brass bodies incorporating screw down isolation valves with dome type operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of air venting valves with a gunmetal body PTFE seats and fluoroelastomer ‘O’-rings. Maximum working pressure 13.5 bar. Maximum operating temperature 95°C.
Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.
Range of concealed flow controls (brass body with various different finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Range of wall mounted concealed manual blending valves with a DZR brass body incorporating a ceramic cartridge headwork with a single lever operating member, fitting is available with trim set (available in various finishes). Maximum working pressure 10.0 bar. Maximum working temperature 70°C.
Range of T-type thermostatic mixing valves with DZR brushed chrome brass bodies and a thermostatic cartridge controlling the temperature. Models TM200VP-3/4ZC and TM200VP-3/4ZD incorporate isolation valves and stainless steel strainers on the inlets. All models incorporate check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, silicone diaphragm and PTFE washers. The valves incorporate lever easing gear. The valves are factory pre-set at 6.0 bar (PTEM510001), 7.0 bar (PTEM510002) or 10.0 bar (PTEM510003). Maximum operating temperature 95°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Page 9 of 95
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
