Range of shower handsets with (plastic bodies - various finishes Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241102029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

24 500 xx0 24 511 xx0 24 512 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of shower sets incorporating a shower hose, shower handset and wall mount. The shower outlet on the wall mount incorporates an approved single check valve (however the complete assembly has not been tested to verify it provides backflow protection). Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241104013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

AXOR

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

46 520 XX0 46 521 XX0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of wall or ceiling mounted shower arms, (brass bodies - various finishes). Maximum operating temperature: 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241102055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M) (Models V1620-50-IS & V1620-100-IS) ½” BSP (F) (All other models)

Marking:

SHS on fitting body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

Ceiling Tubes: V1690-A-XX V1690-B-XX V1690-C-XX V1690-D-XX V1690-E-XX Wall Mounted: V1620-A-XX V1620-B-XX V1620-C-XX V1790-A-XX V1790-B-XX V1640-XX Rough Kits: V1620-50-IS V1620-100-IS Compatible decorative Rose range: V2620-R – Fairfield, V6620-R – Style Moderne, V7620-R – Landmark, T1620-R – One Hundred Collection, T2620-R – Forme Kit Codes: Fairfield V2K620-A-XX, V2K620-B-XX, V2K620-C-XX V2K690-A-XX, V2K690-B-XX, V2K690-C-XX, V2K690-D-XX, V2K690-E-XX V2K790-A-XX V2K790-B-XX V2K640-XX Style Moderne V6K620-A-XX V6K620-B-XX V6K620-C-XX V6K690-A-XX, V6K690-B-XX, V6K690-C-XX, V6K690-D-XX, V6K690-E-XX V6K790-A-XX V6K790-B-XX V6K640-XX Landmark V7K620-A-XX, V7K620-B-XX, V7K620-C-XX V7K690-A-XX, V7K690-B-XX, V7K690-C-XX, V7K690-D-XX, V7K690-E-XX V7K790-A-XX V7K790-B-XX V7K640-XX T10K620-A-XX, T10K620-B-XX, T10K620-C-XX T10K690-A-XX, T10K690-B-XX, T10K690-C-XX, T10K690-D-XX, T10K690-E-XX T10K790-A-XX T10K790-B-XX T10K640-XX Forme T20K620-A-XX, T20K620-B-XX, T20K620-C-XX T20K690-A-XX, T20K690-B-XX, T20K690-C-XX, T20K690-D-XX, T20K690-E-XX T20K790-A-XX T20K790-B-XX T20K640-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters.

Product Images

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of Y pattern strainers having either brass (899ST range) or bronze (900 range) bodies and PTFE seat washers. Maximum working pressure 20.0 Bar see model Maximum working pressure 32.0 Bar see model Maximum operating temperature 100.0°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15 (½”BSP F), DN20 (¾” BSP F), DN25 (1” BSP F), DN32 (1¼” BSP F), DN40 (1½” BSP F), DN50 (2” BSP F).

Marking:

20 Bar VIR logo, flow arrow, PN and size on body 32 Bar VIR logo, flow arrow, PN, size and CR on body

Installation Requirements:

R001 R120

Expiry date:

30/09/2029

Model:

20.0 Bar F9000B015.3378 STRN110001 Bronze Strainer FBSP F9000B020.3378 STRN110002 Bronze Strainer FBSP F9000B025.3378 STRN110003 Bronze Strainer FBSP F9000B032.3378 STRN110004 Bronze Strainer FBSP F9000B040.3378 STRN110005 Bronze Strainer FBSP F9000B050.3378 STRN110006 Bronze Strainer FBSP 32.0 Bar F899ST015.3383 STRN111001 DZR Brass Strainer FBSP F899ST020.3383 STRN111002 DZR Brass Strainer FBSP F899ST025.3383 STRN111003 DZR Brass Strainer FBSP F899ST032.3383 STRN111004 DZR Brass Strainer FBSP F899ST040.3383 STRN111005 DZR Brass Strainer FBSP F899ST050.3383 STRN111006 DZR Brass Strainer FBSP

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

VIR Valvoindustria Ing. Rizzio S.p.A.

Company Name

VIR Valvoindustria Ing. Rizzio S.p.A.

Address

Via Circonvallazione n. 10, 13018 Valduggia (VC)

Country

Italy

General Email

View All Listings by this Company

A range of ‘Y’-patterned strainers with bronze bodies incorporating a stainless-steel mesh strainer and PTFE washers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hattersley, Size PN Rating, Flow Direction arrow on body. Temperature/Pressure ratings WRAS Temperature rating, Brand, Type & cap torque Reference on the I.D. plate.

Installation Requirements:

R001 R120

Expiry date:

31/10/2029

Model:

Fig 817 - ½”, ¾”, 1”, 1 ¼”, 1 ½” & 2” (F) BSP, Fig 817AT - ½”, ¾”, 1”, 1 ¼”, 1 ½” & 2” (F) NPT.

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of In-line Y patterned strainer with cast iron bodies (blue epoxy coated) and stainless-steel screens. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN100 to DN300

Marking:

BBK VAL, DN, PN, GGG50 and flow arrow on body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

BKYS

Product Images

Approval Holder:

BBK VALVE GROUP

Company Name

BBK VALVE GROUP

Address

No.99 YuShan Road Suzhou

Postcode

21500

Country

China

General Email

michael@bbkval.com

View All Listings by this Company

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh. Maximum working pressure: 25 Bar. Maximum operating temperature: 66°C

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) up to 2” BSP (F).

Marking:

Utam, flow arrow, DN & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

UV-14-AS.

Product Images

Manufacturer:

V.K Valves Pvt. Ltd.

Company Name

V.K Valves Pvt. Ltd.

Address

C-106 Focal Point Extension, Jalandhar, India

View All Listings by this Company

Range of In-line Y patterned strainers with ductle iron bodies (blue epoxy powder coated) and stainless-steel mesh. Maximum working pressure: 16 Bar Maximum operating temperature: 85 °C

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400 and DN500 flanged connections

Marking:

Fei Xian Dalu logo, DN, PN and Flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/01/2030

Model:

GL43

Approval Holder:

Fei Xian Dalu Valve Co. Ltd.

Company Name

Fei Xian Dalu Valve Co. Ltd.

Address

No.6 Yanpo Road Economic Development Zone, Feixian Shandong Province

Postcode

China

View All Listings by this Company

Range of bib taps (nickel plated brass) or (DZR brass) bodies – see models, incorporating a spherical valve to control the flow. The products incorporate single lever operating members. Some models are supplied with lock shields (see models). The spout outlet incorporates a hose union spigot connection with a plastic flow straightener. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

241102024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

All models can be supplied in BSPT, NPT or BSPP threads, and the sizes are listed with the models:

Size:

½”, ¾” & 1”

Marking:

Ningbo Rian logo, Size and PN on body DZR Models incorporate an additional CR mark

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

502-XX 502P-XX (DZR Brass) 502S-XX (Lock Shield) 502PS-XX (DZR Brass & Lock Shield) Where XX denotes the size and can be replaced with any of the following: 15 = DN15 (1/2” (M)) 20 = DN20 (3/4” (M)) 25 = DN25 (1” (M))

Product Images

Manufacturer:

Ningbo Rian Valve Co., Ltd

Company Name

Ningbo Rian Valve Co., Ltd

Address

Jishan Industrial Park, Xidian Town, Ninghai County, Ningbo City, Zhejiang Province, China

View All Listings by this Company

Range of wall mounted hose union bib taps incorporating a rising spindle headwork with a T - handle operating member and brass body. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap(s).

WRAS Approval Number:

250104004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

F&P, & date of manufacture (MM-YY) on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

10125108 (natural brass).

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company