502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| 15 745 xx0 | Various | basic set (G3/4) | 10 | 70 | hansgrohe | on the escutcheon | Yes | Push button detent | ||
| 15 764 xx0 | Various | basic set (G3/4) | 10 | 70 | hansgrohe | on the escutcheon | Yes | Push button detent | ||
| 36 717 xx0 | Various | basic set (G3/4) | 10 | 70 | AXOR | on the escutcheon | Yes | Push button detent | ||
| 36 727 xx0 | Various | basic set (G3/4) | 10 | 70 | AXOR | on the escutcheon | Yes | Push button detent | ||
| 36 773 xx0 | Various | basic set (G3/4) | 10 | 70 | AXOR | on the escutcheon | Yes | Push button detent |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Range of wall mounted, or concealed manually operated blending valves, (brass body, chrome finish), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.
Wall mounted thermostatic bar, shower valve, incorporating a ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Each inlet incorporates a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is also supplied with a riser rail, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| VE SHXSMFF C | Chrome | 15mm compression | 5 | 65 | Bristan | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer, Shower Hose, Handset, Riser Rail |
| RP3 CE SHXSMFF C | Chrome (Cr3) | 15mm compression | 5 | 65 | Bristan | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer, Shower Hose, Handset, Riser Rail |
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| T43014B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43084B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43014T | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43084T | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43034 | Chromed | BSP 3/4" (M) x BSP 1/2" (M) offset unions | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43064B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T43194B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T44014B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T44054B | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T44014T | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
| T44054T | Chromed | BSP 3/4" (F) | 10 | 85 | Company logo | Body | No | 1/4 Turn ceramic disk | Not Applicable | Inlet Strainer |
Range of wall mounted, thermostatic shower valves (brass body – Chrome finish), incorporating a single sequential headwork controlling both temperature and flow using a single lever operating member. The inlets incorporate stainless-steel strainers, plastic flow regulators and approved check valve cartridges (verified by test - suitable for backflow protection against fluid category 2) Product is not supplied with shower hose, handset, overhead shower or riser rail assembly. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower valves (brass body, chrome finish) incorporating quarter turn ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic blending valves with chrome plated brass bodies and ceramic disc headwork with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge also with a dome type operating member. Inlets incorporate single check valve cartridges however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wall mounted thermostatic shower valves with brass bodies (chromium plated) incorporating a ceramic disc controlling the flow to the shower (for some models it diverts the flow to a hand shower or overhead shower) using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Inlets incorporate stainless steel strainers and an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C
Page 764 of 887
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
