Range of plastic pushfit fittings, for use with ALTOPOLY EVOH PEX pipe, manufactured to BS7291-3:2010 (15 to 22mm), PEX pipe manufactured to BS 7291-3 (28mm only) and ALTOPOLY PB pipe (white and grey) manufactured to BS7291-2:2010 (15 to 28mm). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702046

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 applies to the ALTOPOLY PB (white) pipe only.

Size:

All models available in 15, 22 or 28mm pushfit.

Marking:

Material and size on fitting body. Altopoly, size, WRAS, manufacturing standard, temp, pressure and batch no. on pipe.

Installation Requirements:

R001 R008

Expiry date:

31/07/2030

Proviso:

The supplied pipe inserts must be used.

Model:

SC (Straight Connector) RED (Reducer) ELB (Elbow) SE (Stop Ends) TEE (Equal Tee) BRT (Unequal Tee)

Approval Holder:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Bedford Bedfordshire

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Range of brass fittings inserts for use with copper pipes (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

251015018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

‘DIRECT’ and size on nut or body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

Fitting Insert with O-ring: DPSINSERT15: 15mm, DPSINSERT22: 22mm.

Approval Holder:

Direct Plumbing Supplies Ltd

Company Name

Direct Plumbing Supplies Ltd

Address

Unit 4 Pheonix Parade Artex Avenue Rustington Little Hampton

Postcode

BN16 3LN

Country

United Kingdom

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Taizhou Double Winners Copper Co., Ltd logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

6243G Coupler Male: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6270G Coupler Female: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6359G Straight Swivel: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x1", 28x11/4". 6092G Male Elbow: 15x1/2", 15x3/4", 22x3/4", 22x1", 28x1". 6090G Female Elbow: 15x1/2", 15X3/4", 22x3/4", 22x1", 28x1". 6472G Female Wallplate Elbow: 15x1/2", 22x3/4". 6130G Branch Tee (left x right x middle): 15x15x1/2", 22x22x1/2", 22x22x3/4", 28x28x1/2", 28x28x3/4", 28x28x1", 35x35x1/2", 35x35x3/4", 35x35x1", 42x42x1/2", 54x54x1/2". 6246G Female Adaptor: 1/2"x15, 3/4"x22. 6361G Male Union: 15x1/2", 22x3/4", 28x1". 6330G Female Union: 15x1/2", 22x3/4", 28x1". Models added December 2025 6330 Straight Union 15mm 22mm 28mm 35mm 42mm 54mm 6280 Male Adaptor 12x1/2" 15x1/2" 18x1/2" 22x1/2" 22x3/4" 28x1"

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

“>B<Press NZ” range of press fittings incorporating copper (EN12165 CW024A) or copper alloy (CC499K-DW) bodies. For use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251108015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

>B< (Conex logo) & size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Copper alloy bodies: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (F), PIR4090G060600 – ¾” x ¾” BSP (F). PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½”, PIR4092G060600 – ¾” x ¾”. PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M), PIR4243G040600 – ½” x ¾” BSP (M), PIR4243G060400 – ¾” x ½” BSP (M), PIR4243G060600 – ¾” x ¾” BSP (M), PIR4243G080600 – 1” x ¾” BSP (M), PIR4243G080800 – 1” x 1” BSP (M). PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (F), PIR4471G060600 – ¾” – ¾” BSP (F). PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M). PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M), PIR4270G060600 – ¾” x ¾” BSP (M), PIR4270G080800 – 1” x 1” BSP (M). Copper bodies: PIR5040; - 45° Street Elbow PIR5040 040000 – ½”, PIR5040 060000 – ¾”, PIR5040 080000 – 1”. PIR5001; - 90° Street Bend PIR5001 040000 – ½”, PIR5001 060000 – ¾”, PIR5001 080000 – 1”. PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½”, PIR5240 080400 – 1” x ½”, PIR5240 080600 – 1” x ¾”. PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½”. PIR5002; - 90° Bend PIR5002 040000 – ½”, PIR5002 060000 – ¾”, PIR5002 080000 – 1”. PIR5041; - 45° Elbow PIR5041 040000 – ½”, PIR5041 060000 – ¾”, PIR5041 080000 – 1”. PIR5130; - Equal Tee PIR5130 040000 – ½”, PIR5130 060000 – ¾”, PIR5130 080000 – 1”. PIR5270; - Coupler PIR5270 040000 – ½” PIR5270 060000 – ¾” PIR5270 080000 – 1” PIR5301; – Stop End PIR5301 040000 – ½”, PIR5301 060000 – ¾”, PIR5301 080000 – 1”. PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” PIR5130 080408 – 1” x ½” x 1” PIR5130 080608 – 1” x ¾” x 1” PIR5275; - Slip Coupler PIR5275 040000 – ½” PIR5275 060000 – ¾” PIR5275 080000 – 1” PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½”, PIR5243 080400 – 1” x ½”, PIR5243 080600 – 1” x ¾”. PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½”, PIR5130 080806 – 1” X 1” X ¾”, PIR5130 040604 – ½” X ¾” X ½”, PIR5130 060806 – ¾“ X 1” X ¾”, PIR5130 040804 – ½” X 1” X ½”, PIR5130 080404 – 1” X ½” X ½”, PIR5130 080604 – 1” X ¾” X ½”, PIR5130 080406 – 1” X ½” X ¾”.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Company Name

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Address

IBP Atcosa S.L - Polígono Industrial Quintos-Aeropuerto, 14005 Córdoba Spain & IBP Instalfittings Sp z o.o., - ul. Stanisława Zwierzchowskiego 29, 61-249 Poznań, Poland

General Email

View All Listings by this Company

Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240904040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm, ½” - 2” BSP. Sizes added December 2024: 66.7mm - 108mm. 2½” - 4” BSP.

Marking:

"CORE" and size, EN1253 & batch number on fitting.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Copper Coupler: CCP1015 - 15mm x 15mm, CCP1022 - 22mm x 22mm, CCP1028 - 28mm x 28mm, CCP1035 - 35mm x 35mm, CCP1042 - 42mm x 42mm, CCP1054 - 54mm x 54mm, CCP1067 - 66.7mm x 66.7mm, CCP1076 - 76.1mm x 76.1mm, CCP1108 - 108mm x 108mm. Copper Elbow: CCP12015 - 15mm x 15mm, CCP12022 - 22mm x 22mm, CCP12028 - 28mm x 28mm, CCP12035 - 35mm x 35mm, CCP12042 - 42mm x 42mm, CCP12054 - 54mm x 54mm, CCP12067 - 66.7mm x 66.7mm, CCP12076 - 76.1mm x 76.1mm, CCP12108 - 108mm x 108mm. Copper 90 Degree Street Elbow: CCP12S015 - 15mm x 15mm, CCP12S022 - 22mm x 22mm, CCP12S028 - 28mm x 28mm, CCP12S035 - 35mm x 35mm, CCP12S042 - 42mm x 42mm, CCP12S054 - 54mm x 54mm, CCP12S067 - 66.7mm x 66.7mm, CCP12S076 - 76.1mm x 76.1mm, CCP12S108 - 108mm x 108mm. Copper 45 Degree Elbow: CCP21015 - 15mm x 15mm, CCP21022 - 22mm x 22mm, CCP21028 - 28mm x 28mm, CCP21035 - 35mm x 35mm, CCP21042 - 42mm x 42mm, CCP21054 - 54mm x 54mm, CCP21067 - 66.7mm x 66.7mm, CCP21076 - 76.1mm x 76.1mm, CCP21108 - 108mm x 108mm. Copper 45 Degree Street Elbow: CCP21S015 - 15mm x 15mm, CCP21S022 - 22mm x 22mm, CCP21S028 - 28mm x 28mm, CCP21S035 - 35mm x 35mm, CCP21S042 - 42mm x 42mm, CCP21S054 - 54mm x 54mm, CCP21S067 - 66.7mm x 66.7mm, CCP21S076 - 76.1mm x 76.1mm, CCP21S108 - 108mm x 108mm. Copper Fitting Reducer: CCP6022015 - 22mm x 15mm, CCP6028015 - 28mm x 15mm, CCP6028022 - 28mm x 22mm, CCP6035022 - 35mm x 22mm, CCP6035028 - 35mm x 28mm, CCP60042022 - 42mm x 22mm, CCP6042028 - 42mm x 28mm, CCP6042035 - 42mm x 35mm, CCP6054028 - 54mm x 28mm, CCP6054035 - 54mm x 35mm, CCP6054042 - 54mm x 42mm, CCP6067028 - 66.7mm x 28mm, CCP6067035 - 66.7mm x 35mm, CCP6067042 - 66.7mm x 42mm, CCP6067054 - 66.7mm x 54mm, CCP6076035 - 76.1mm x 35mm, CCP6076042 - 76.1mm x 42mm, CCP6076054 - 76.1mm x 54mm, CCP6076067 - 76.1mm x 66.7mm, CCP6108042 - 108mm x 42mm, CCP6108054 - 108mm x 54mm, CCP6108067- 108mm x 66.7mm, CCP6108076 - 108mm x 76.1mm. Copper Equal Tee: CCP24015 - 15mm x 15mm x 15mm, CCP24022 - 22mm x 22mm x 22mm, CCP24028 - 28mm x 28mm x 28mm, CCP24035 - 35mm x 35mm x 35mm, CCP24042 - 42mm x 42mm x 42mm, CCP24054 - 54mm x 54mm x 54mm, CCP24067 - 66.7mm x 66.7mm x 66.7mm, CCP24076 - 76.1mm x 76.1mm x 76.1mm, CCP24108 - 108mm x 108mm x 108mm. Copper Reducer Tee: CCP28015015022 - 15mm x 15mm x 22mm, CCP27022015015 - 22mm x 15mm x 15mm, CCP26022015022 - 22mm x 15mm x 22mm, CCP25022015 - 22mm x 22mm x 15mm, CCP28022022028 - 22mm x 22mm x 28mm, CCP26028015028 - 28mm x 15mm x 28mm, CCP27028022015- 28mm x 22mm x 15mm, CCP27028022022 - 28mm x 22mm x 22mm, CCP26028022028 - 28mm x 22mm x 28mm, CCP25028015- 28mm x 28mm x 15mm, CCP25028022 - 28mm x 28mm x 22mm, CCP28028028035 - 28mm x 28mm x 35mm, CCP27035022022 - 35mm x 22mm x 22mm, CCP26035022035 - 35mm x 22mm x 35mm, CCP27035028022 - 35mm x 28mm x 22mm, CCP27035028028 - 35mm x 28mm x 28mm, CCP26035028035 - 35mm x 28mm x 35mm, CCP25035015 - 35mm x 35mm x 15mm, CCP25035022 - 35mm x 35mm x 22mm, CCP25035028 - 35mm x 35mm x 28mm, CCP27042035035 - 42mm x 35mm x 35mm, CCP25042015 - 42mm x 42mm x 15mm, CCP25042022- 42mm x 42mm x 22mm, CCP25042028 - 42mm x 42mm x 28mm, CCP25042035 - 42mm x 42mm x 35mm, CCP25054022 - 54mm x 54mm x 22mm, CCP25054028 - 54mm x 54mm x 28mm, CCP25054035 - 54mm x 54mm x 35mm, CCP25054042 - 54mm x 54mm x 42mm. Reducer Tee: CCP25067028- 66.7mm x 66.7mm x 28mm, CCP25067035 - 66.7mm x 66.7mm x 35mm, CCP25067042 - 66.7mm x 66.7mm x 42mm, CCP25067054 - 66.7mm x 66.7mm x 54mm, CCP25076022 - 76.1mm x 76.1mm x 22mm, CCP25076028 - 76.1mm x 76.1mm x 28mm, CCP25076035 - 76.1mm x 76.1mm x 35mm, CCP25076042 - 76.1mm x 76.1mm x 42mm, CCP25076054 - 76.1mm x 76.1mm x 54mm, CCP250108054 - 108mm x 108mm x 54mm, CCP250108067 - 108mm x 108mm x 66.7mm, CCP250108076 - 108mm x 108mm x 76.1mm. Copper End Cap: CCP61015 - 15mm, CCP61022 - 22mm, CCP61028 - 28mm, CCP61035 - 35mm, CCP61042 - 42mm, CCP61054 - 54mm, CCP61067 - 66.7mm, CCP61076 - 76.1mm, CCP61108 - 108mm. Copper Slip Coupler: CCP1S015 - 15mm x 15mm, CCP1S022 - 22mm x 22mm, CCP1S028 - 28mm x 28mm, CCP1S035 - 35mm x 35mm, CCP1S042 - 42mm x 42mm, CCP1S054 - 54mm x 54mm, CCP1S067 - 66.7mm x 66.7mm, CCP1S076 - 76.1mm x 76.1mm, CCP1S108 - 108mm x 108mm. Brass Male Adaptor: CCP3015 - 15mm x 1/2", CCP3015020 - 15mm x 3/4", CCP3022- 22mm x 1/2", CCP3022015 - 22mm x 3/4", CCP3022025 - 22mm x 1", CCP3028 - 28mm x 1", CCP3035 - 35mm x 1.1/4", CCP3042 - 42mm x 1.1/2", CCP3054- 54mm x 2", CCP3067 - 66.7mm x 2.1/2", CCP3076065 - 76.1mm x 2.1/2", CCP3076 - 76.1mm x 3", CCP3108 - 108mm x 4". Brass Female Adaptor: CCP2015 - 15mm x 1/2", CCP2022015 - 22mm x 1/2", CCP2022 - 22mm x 3/4", CCP2028 - 28mm x 1", CCP2035 - 35mm x 1.1/4", CCP2042 - 42mm x 1.1/2", CCP2054 - 54mm x 2", CCP2076065 - 76.1mm x 2.1/2", Brass Female Tee: CCP30015 - 15mm x 15mm x 1/2", CCP30022015 - 22mm x 22mm x 1/2", CCP30022020 - 22mm x 22mm x 3/4", CCP30028015 - 28mm x 28mm x 1/2", CCP30028020 - 28mm x 28mm x 3/4", CCP30035015 - 35mm x 35mm x 1/2", CCP30042015 - 42mm x 42mm x 1/2", CCP30054015- 54mm x 54mm x 1/2", CCP30076015 - 76.1mm x 76.1mm x 1/2", CCP30076020 - 76.1mm x 76.1mm x 3/4". Brass Straight Swivel Connector: CCP68015 - 15mm x 3/4", CCP68022025 - 22mm x 1", CCP68022 - 22mm x 3/4", Brass Male Elbow: CCP13015- 15mm x 1/2", CCP13022 - 22mm x 3/4", CCP13028 - 28mm x 1", CCP13035 - 35mm x 1.1/4", CCP13042 - 42mm x 1.1/2", CCP13054 - 54mm x 2", CCP14015- 15mm x 1/2", CCP14022 - 22mm x 3/4", CCP14028 - 28mm x 1", CCP14035 - 35mm x 1.1/4", CCP14042 - 42mm x 1.1/2", CCP14054 - 54mm x 2", CCP15015 - 15mm x 1/2", Brass Union Coupler: CCP11015 - 15mm, CCP11022 - 22mm, CCP11028 - 28mm, CCP11035 - 35mm, CCP11042 - 42mm, CCP11054 - 54mm. Male Insert Adaptor: CCP8015 - 15mm x 1/2", CCP022- 22mm x 3/4", CCP028 - 28mm x 1", CCP035 - 35mm x 1.1/4", CCP8042 - 42mm x 1.1/2", CCP8054 - 54mm x 2". Female Insert Adaptor: CCP7015- 15mm x 1/2", CCP7022 - 22mm x 1/2", CCP7022015 - 22mm x 3/4", CCP7028 - 28mm x 1", CCP7035 - 35mm x 1.1/4", CCP7042 - 42mm x 1.1/2", CCP7054 - 54mm x 2". Brass Male Union: CCP69015 - 15mm x 1/2", CCP69022 - 22mm x 3/4", CCP69028 - 28mm x 1", CCP69035 - 35mm x 1.1/4", CCP69042 - 42mm x 1.1/2", CCP69054 - 54mm x 2". Brass Female Union: CCP69F015 - 15mm x 1/2", CCP69F022 - 22mm x 3/4", CCP69F028 - 28mm x 1", CCP69F035- 35mm x 1.1/4", CCP69F042 - 42mm x 1.1/2", CCP69F054 - 54mm x 2". Dual Port Tee: CCP32067015 - 66.7mm x 66.7mm x 1/2", CCP32076015- 76.1mm x 76.1mm x 1/2", CCP32108020 - 108mm x 108mm x 1/2".

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

RAPID PRESS logo 'RP' WRAS, batch & size.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

6243G Coupler Male: MACP015021 15x1/2", MACP01507 15x3/4", MACP022021 22x1/2", MACP022027 22x3/4", MACP022034 22x1", MACP028027 28x3/4", MACP028034 28x1", MACP035034 35x1", MACP035042 35x11/4", MACP042048 42x11/2", MACP054060 54x2". 6270G Coupler Female: FACP015021 15x1/2", FACP015027 15x3/4", FACP022021 22x1/2", FACP022027 22x3/4", FACP022034 22x1", FACP028027 28x3/4", FACP028034 28x1", FACP035034 35x1", FACP035042 35x11/4", FACP042048 42x11/2", FACP054060 54x2". 6359G Straight Swivel: TCCP015021 15x1/2", TCCP015027 15x3/4", TCCP022021 22x1/2", TCCP022027 22x3/4", TCCP022034 22x1", TCCP028034 28x1", TCCP028042 28x11/4". 6092G Male Elbow: MECP015021 15x1/2", MECP015027 15x3/4", MECP022027 22x3/4", MECP220340 22x1", MECP028034 28x1". 6090G Female Elbow: FECP015021 15x1/2", FECP015027 15X3/4", FECP022027 22x3/4", FECP022034 22x1", FECP028034 28x1". 6472G Female Wallplate Elbow: FWCP015021 15x1/2", FWCP022027 22x3/4". 6130G Branch Tee (left x right x middle): FTCP015 15x15x1/2", FTCP022 22x22x1/2", FTCP022027 22x22x3/4", FTCP028 28x28x1/2", FTCP028027 28x28x3/4", FTCP028034 28x28x1", FTCP035 35x35x1/2", FTCP035027 35x35x3/4", FTCP025024 35x35x1", FTCP042 42x42x1/2", FTCP054027 54x54x1/2". 6246G Female Adaptor: FCCP015021 1/2"x15, FCCP022027 3/4"x22. 6361G Male Union: MUCP025021 15x1/2", MUCP022027 22x3/4", MUCP028034 28x1". 6330G Female Union: FUCP015021 15x1/2", FUCP022027 22x3/4", FUCP028034 28x1".

Approval Holder:

Rapid Press Fittings Ltd

Company Name

Rapid Press Fittings Ltd

Address

Piksa House 2 Penrod Way Heysham

Postcode

LA3 2UZ

Country

United Kingdom

Phone

01524 389494

General Email

sharronwood@dstgroup.co.uk

View All Listings by this Company

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

251004715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

6.35mm pushfit.

Marking:

Hanstrom printed on front cover.

Installation Requirements:

R001 R008 R040

Expiry date:

31/10/2030

Model:

S3-H010, S3-H020, NX00B01, S3-H070, S3-H110.

Approval Holder:

Hanstrom Ltd

Company Name

Hanstrom Ltd

Address

1205 Aster House North Wharf Road London

Phone

07950 919161

General Email

accounts@theflipstock.com

View All Listings by this Company

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

251004716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

6.35mm pushfit.

Marking:

Wodar on front cover.

Installation Requirements:

R001 R008 R040

Expiry date:

31/10/2030

Model:

S2-H010, BN-H0110, S2-H030, S2-H070, S2-H110.

Approval Holder:

Wodar Ltd

Company Name

Wodar Ltd

Address

11C Stephenson Road Clacton on Sea Essex

Postcode

CO15 4XA

Country

United Kingdom

Phone

07894 606234

General Email

michael@wodar.com

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

Resideo and product information on face of water meter. Resideo, POWOGAZ & technical info label on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: EW1100AC060 EW1100AC2000 EW1050AP2000 EW1100AC1100 EW1100AC1200 EW1100CM1200 EW1050AP1200 EW1100CM2000 Maximum operating temperature 85°C: EW1101AC0600 EW1101AC1100 EW1101AC1200 EW1101AC1400 EW1051AP1200 EW1100AC1400 EW1101CM1200 EW1101AC2000 EW1101CM2000 EW1051AP2000

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Range of flow measurement devices (DZR brass) bodies incorporating two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Crane, CR, size, flow arrow and PN on the body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

D901 - ½”, ¾”, 1”, 1 ¼”, 1 ½”, and 2” BSPT (BS EN 10226) - (M x F). D902 - ½” BSPT (BS EN 10226) - (M x F).

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company