Directory Search Results

Print List

#2105522

'Art. 0985077205 Anti-leak Tape'. Site applied, off-white coloured, fibre glass impregnated, polyurethane repair tape. Apply as per manufacturer's technical data sheet version '001' dated 26.07.2021. Cure for 30 minutes@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5308 Repair Material
Expiry date:
31/05/2026

Approval Holder:
Würth International AG
Company Name
Würth International AG
Address
Aspermontstrasse 1, CH-7000 Chur

View All Listings by this Company

Print This Approval


#2108515

'EP906'. Black coloured, extruded EPDM washer. Shore hardness 90. Tested in-radius size 1.4mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2108515
Expiry date:
31/08/2026

Approval Holder:
Hutchinson Le Joint Francais
Company Name
Hutchinson Le Joint Francais
Address
5 Rue Ampere, 22005 Saint-Brieuc, Cedex 1
Country
France

View All Listings by this Company

Print This Approval


#2109507

'ERIKS 55985 Gaskets & ‘O’ rings'. Black coloured, compression moulded EPDM gaskets & ‘O’ rings'. Shore hardness 70A. The gaskets have a tested in-radius size of 1.0mm. The ‘O’ rings have a tested in-radius size of 1.76mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2109507
Expiry date:
30/09/2026

Approval Holder:
Eriks Group
Company Name
Eriks Group
Address
Toermmalijnstraat 5, 1812 RL Alkmaar, Postbus 280, 1800 BK Alkmaar
Country
Netherlands
General Email
info@eriks.com

View All Listings by this Company

Print This Approval


#2107559

'CVE45, CVE48, CVE50, CVE52, CVE55, CVE60, CVE61, CVE65, CVE69, CVE70, CVE75, CVE78 & CVE80'. Black coloured, extruded, EPDM materials. Shore hardness between 45 & 80. Tested in-radius size 1.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2107559
Expiry date:
31/07/2026

Approval Holder:
VIP Polymers Ltd.
Company Name
VIP Polymers Ltd.
Address
15 Windover Road, Huntingdon, Cambridgeshire
Postcode
PE29 7EB
Phone
01480 411 333
General Email
info@vip-polymers.com

View All Listings by this Company

Print This Approval


#2012568

'S-9028'. Black coloured, compression moulded EPDM rubber material Shore hardness 60 ShA. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012568
Expiry date:
31/12/2025

Approval Holder:
Amiantit Rubber Industries Ltd
Company Name
Amiantit Rubber Industries Ltd
Address
PO Box 589 Damman 31421 Saudi Arabia
Phone
Tel: +966 3 8571160/8571164 Fax: +966 3 8573200

View All Listings by this Company

Print This Approval


#2111506

'EBW-65'. Black coloured, compression moulded EPDM rubber material. Shore hardness 65. Tested in-radius size 0.98mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111506
Expiry date:
30/11/2026

Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval


#2109544

'RCI EP 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109544
Expiry date:
30/09/2026

Approval Holder:
Rubber Craft Industries
Company Name
Rubber Craft Industries
Address
J-294, Indaryani Nagar, MIDC Bhosari, Pune - 411026
Country
India

View All Listings by this Company

Print This Approval


#2008543

'KEG-2003H-30, KEG-2003H-40, KEG-2003H-50, KEG-2003H-60 & KEG-2003H-70 (no postcure)'. Translucent, compression moulded, silicone rubber materials. Shore hardness between 30 & 70. Tested in-radii sizes between 0.18mm & 5.9mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2008543
Expiry date:
31/08/2025

Approval Holder:
Shin-Etsu Silicones Europe B.V.
Company Name
Shin-Etsu Silicones Europe B.V.
Address
Bolderweg 32 1332 AV Almere The Netherlands
Phone
+31 (0) 36 549 31 70
General Email
sese_info@shinetsu.nl

View All Listings by this Company

Print This Approval


#2107566

'581189 Center Jet Blue Plus'. Off-white coloured, PTFE paste intended for use as a thread sealant. For use with water up to 23°C.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2107566
Expiry date:
31/07/2026

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2107565

'Mega All White'. White coloured (opaque) anaerobic sealant/adhesive. Apply in strict accordance with manufacturer's instructions 'issue 01' dated '09/09/2021'. For use with water up to 85°C.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2107565
Expiry date:
31/07/2026

Approval Holder:
Cedesa Ltd.
Company Name
Cedesa Ltd.
Address
Chater Lea Buildings, Icknield Way, Letchworth, Hertfordshire
Postcode
SG6 1WT

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 71 of 414

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.