Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240602076

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.

Marking:

IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.

Installation Requirements:

R001 R040 R120

Expiry date:

30/06/2029

Model:

DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2201110

Size:

DN50 to DN600 flanged

Marking:

Oventrop & Business address, WRAS, PN and range on data plate on body. PN and DN on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

166 85 LUGGED SERIES & 166 93 WAFER SERIES BUTTERFLY VALVES SIZE DN 50MM-DN 600MM 166 84 LUGGED SERIES & 166 92 WAFER SERIES BUTTERFLY VALVES SIZE DN 50MM-DN 600MM

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

241002020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26mm O.D.

Marking:

HG on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30079500 & 30650210

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall mounted flow control valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork. The valves are supplied with multiple trim sets and operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

241004006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

The Watermark Collection Logo on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

AIC53-XX Anika Crosshead Wall Mounted Valve Supplied with a “three spoke” Handle AIL53-XX Anika Lever Wall Mounted Valve Supplied with a “tapered lever” Handle BRO54-XX Brooklyn Wall Mounted Valve Supplied with a "wheel shaped" Handle ELV50-XX Elan Vital Wall Mounted Valve Supplied with a "plumbing style lever" Handle ELM54-XX Elements Wall Mounted Valve Supplied with a "circular flat" Handle HIC55-XX Highline Crosshead Wall Mounted Valve Supplied with a "crosshead" Handle HIL55-XX Highline Lever Wall Mounted Valve Supplied with a "lever" Handle LOF49-XX Loft Wall Mounted Valve Supplied with a "tubular lever" Handle LOC53-XX London Crosshead Wall Mounted Valve Supplied with a "crosshead and barrel style" Handle LOL53-XX London Lever Wall Mounted Valve Supplied with a "lever and barrel style" Handle SEC53-XX Sense Crosshead Wall Mounted Valve Supplied with a "hammered base crosshead" Handle SED53-XX Sense Dial Wall Mounted Valve Supplied with a "hammered base dial" Handle SEL53-XX Sense Lever Wall Mounted Valve Supplied with a "hammered base lever" Handle TIN53-XX Titanium Wall Mounted Valve Supplied with a "knurled body" Handle URA54-XX Urbane Astor Wall Mounted Valve Supplied with a "knurled lever" Handle URC54-XX Urbane Cooper Wall Mounted Valve Supplied with a "knurled crosshead" Handle ZEC53-XX Zen Bianco Carrara Wall Mounted Valve Supplied with a "bianco carrara marble" Handle ZEF53-XX Zen Finished Metal Wall Mounted Valve Supplied with a "tapering circular metal" Handle ZEH53-XX Zen Honey Onyx Wall Mounted Valve Supplied with a "honey onyx" Handle ZEI53-XX Zen Ice White Wall Mounted Valve Supplied with a "ice white onyx" Handle ZEM53-XX Zen Nero Marqunia Wall Mounted Valve Supplied with a "nero marquina" Handle XX Denotes the finish codes as below: Aged Brass, AB Aged Nickel, AN Heritage Brass, HB Charcoal, CH Custom Gloss Lacquer, GL Custom Matt Lacquer, MT Black Mirror, BM Polished Brass, PB Green Patina, GP Gun Metal, GM Matt Black, MB Oil Rubbed Bronze, OR Pewter, PT Polished Gold, PG Polished Chrome, PC Polished Copper, CO Natural Brass, NB Polished Nickel, PN Rustica Brass, RB Brushed Gold, BG Brushed Brass, BB Brushed Nickel, BN Tarnished Brass, TB Vintage Brass, VB Vintage Copper, VC Satin Brass, SB Luxe Brass, LB

Product Images

Approval Holder:

The Watermark Collection

Company Name

The Watermark Collection

Address

16a Tower Workshops 58 Riley Road London

Country

SE1 3DG

View All Listings by this Company