IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

Country

China

General Email

View All Listings by this Company

MecFlow Press (PPSU & Brass) Ranges of press fittings for use with MecFlow Press pipes. Maximum working pressure 10.0 bar. The maximum operating temperature is 95oC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307914

Size:

16mm-63mm.

Marking:

Pipe – MecFlow Press, Size, PE-Xb/Al/PE-RT, date of production, made in Germany, operation parameters. Fittings – ‘F’, size, PPSU, production date.

Installation Requirements:

R001 R008

Expiry date:

31/07/2028

Model:

8017.16X05B 8017.16X05W 8017.16X075W 8017.20X05.90BW 8017.20X05W 8017.20X075.90BW 8017.20X075B 8017.20X075W 8017.20X1B 8017.26X075.90BW 8017.26X075B 8017.26X1B 8017.32X1.90BW 8017.32X125B 8017.32X1B 8024.20X16W 8024.26X16W 8024.26X20W 8024.32X20W 8024.32X26W 8027.16X15B 8027.20X22B 8004.26X16X26.90W 8004.26X20X16.90W 8004.26X20X20.90W 8004.26X20X26.90W 8004.26X26X16.90W 8004.26X26X20.90W 8004.32.90W 8004.32X16X32.90W 8004.32X20X26.90W 8004.32X20X32.90W 8004.32X26X26.90W 8004.32X26X32.90W 8004R.16.90W 8010.16W 8027.26X22B 8027.32X28B 8030.16W 8030.20W 8030.26W 8030.32W 8046.16X05X16.90BW 8046.20X05X20.90BW 8046.20X075X20.90BW 8046.26X05X26.90BW 8046.26X075X26.90BW 8046.32X05X32.90BW 8046.32X075X32.90BW 8046.32X1X32.90BW 8058.16X05.90BW 8058.16X05BW 8058.16X075.90BW 8058.16X075BW 8058.20X075.90BW 8058.20X075BW 8058.20X1BW 8000.16.50W 8000.20.50W 8000.26.50W 8000.32.50W 8000C.16.1000W 8000C.20.1000W 8000C.26.500W 8000C.32.500W 8058.26X075BW 8058.26X1.90BW 8058.26X125BW 8058.26X15BW 8058.26X1BW 8058.32X125BW 8058.32X15BW 8058.32X1BW 8001.16.90W 8001.20.90W 8010.20W 8010.26W 8010.32W 8015.16X05.35.90BW 8015.20X05.35.90BW 8015.20X075.35.90BW 8015.26X075.35.90BW 8001.26.45W 8001.26.90W 8001.32.45W 8001.32.90W 8001R.16.90W 8004.16.90W 8004.16X20X16.90W 8004.20.90W 8004.20X16X16.90W 8004.20X16X20.90W 8004.20X20X16.90W 8004.20X26X20.90W 8004.26.90W 8004.26X16X20.90W 8016.16X05.90BW 8016.16X05B 8016.20X05.90BW 8016.20X05B 8016.20X075.90BW 8016.20X075B 8016.26X075.90BW 8016.26X075B 8016.26X1B 8016.32X1.90BW 8016.32X125B 8016.32X1B 8017.16X05.90BW alpex duo XS - Multilayer metal PE-Xb/Al/PE-RT pipe (DN16, 20, 26, 32), alpex L - Multilayer metal PE-Xb/Al/PE-RT pipe (DN40, 50,63), alpex duo XS - Press fittings made of brass and PPSU (DN16, 20, 26, 32), alpex L - Press fittings made of brass and PPSU (DN40, 50, 63).

Approval Holder:

Polypipe Building Services

Company Name

Polypipe Building Services

Address

New Hythe Business Park, College Road, Aylesford, Kent

Postcode

ME20 7PJ

View All Listings by this Company

Manufacturer:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

Manufacturer:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

Allpex range of end feed capillary fittings and brazing fittings for use with copper tube (manufactured to BS EN 1057). EG fittings have gunmetal bodies, ED fittings have DZR brass bodies & EB fittings have brass bodies. For above ground use only. Maximum working pressure: 6mm – 34mm 25Bar, 34mm -54mm 25Bar, 54mm – 108mm 16Bar, 108mm – 159mm 5 Bar. Maximum operating temperature 30°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240502052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list

Marking:

1254, AL logo and size on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

EC10 – Straight Coupler CxC EC10 – 6mm EC10 – 8mm EC10 – 10mm EC10 –12mm EC10 –15mm EC10 –18mm EC10 –22mm EC10 –28mm EC10 –35mm EC10 –42mm EC10 –54mm EC10 –66.7mm EC10 –76.1mm EC10 –108mm EC10 –133mm EC10 –159mm EC10S – Slip Coupler without Stop EC10S –15mm EC10S –18mm EC10S –22mm EC10S –28mm EC10S –35mm EC10S –42mm EC10S –54mm EC10U -Straight Union CxC Copper Tail EC10U –15mm EC10U –22mm EC10U –28mm EC10U –35mm EC10U –42mm EC10U –54mm EC10X – Full Crossover CxC EC10X –10mm EC10X –12mm EC10X –15mm EC10X –18mm EC10X –22mm EC10XF – Part Crossover FTGxC EC10XF –10mm EC10XF –12mm EC10XF –15mm EC10XF –18mm EC10XF –22mm EC11 – Reducing Coupler CxC (Sizes EC11 - 108 = 10x8mm) EC11 –108 EC11 –128 EC11 –1210 EC11 –158 EC11 –1510 EC11 –1512 EC11 –1810 EC11 –1812 EC11 –1815 EC11 –2215 EC11 –2218 EC11 –2815 EC11 –2818 EC11 –2822 EC11 –3515 EC11 –3522 EC11 –3528 EC11 –4215 EC11 –4222 EC11 –4228 EC11 –4235 EC11 –5415 EC11 –5422 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –6742 EC11 –6754 EC11 –7635 EC11 –7642 EC11 –7654 EC11 –7667 EC11 –10854 EC11 –10867 EC11 –10876 EC11F – Fitting Reducer FTG x C (Sizes EC11F – 86 = 8x6mm) EC11F –86 EC11F –106 EC11F –108 EC11F –128 EC11F –1210 EC11F –158 EC11F –1510 EC11F –1512 EC11F –1810 EC11F –812 EC11F –1815 EC11F –2212 EC11F –2215 EC11F –2218 EC11F –2815 EC11F –2818 EC11F –1822 EC11F –3515 EC11F –3518 EC11F –3522 EC11F –3528 EC11F –4215 EC11F –4218 EC11F –4222 EC11F –4228 EC11F –4235 EC11F –5415 EC11F –5418 EC11F –5422 EC11F –5428 EC11F –5435 EC11F –5442 EC11F –6728 EC11F –6735 EC11F –6742 EC11F –6754 EC11F –7635 EC11F –7642 EC11F –7654 EC11F –7667 EC11F –10842 EC11F –10854 EC11F –10867 EC11F –10876 EC11F –13367 EC11F – 13376 EC11F –133108 EC11F –15954 EC11F –15967 EC11F –15976 EC11F –159108 EC11F –159133 EC11FL – Long Fitting Reducer FTG x C (EC11FL – 158 = 15x8mm) EC11FL –158 EC11FL –1510 EC11FL –2215 EC11MI - Metric x Imperial Coupler C x C: EC11MI -15D – 15mmx1/2” EC11MI -22E – 22mmx3/4” EC11MI -28F – 28mmx1” EC11MI -35G – 35mmx11/4” EC12U – Straight male union C x MI (taper) cone joint, copper tail (boiler union): EC12U –15D - 15mmx1/2”BSP EC12U –22E – 22mmx ¾”BSP EC12U –22F – 22mmx1”BSP EC12U –28F – 28mmx1”BSP EC12U –35G – 35mmx11/4”BSP EC12U –42H – 42mmx11/2”BSP EC12U –54I – 54mmx2”BSP EC14U – Straight female union, C x FI cone joint, Copper tail: EC14U –15D – 15mmx1/2”BSP EC14U –22E – 22mmx ¾”BSP EC14U –28F – 28mmx1”BSP EC14U –35G – 35mmx11/4”BSP EC14U –42H – 42mmx11/2”BSP EC14U –54I – 54mmx2”BSP EC16 – Straight tep connector, C x FI (swivel) + Washer: EC16 –15D – 15mmx1/2”BSP EC16 –15E – 15mmx3/4”BSP EC16 –22E – 22mmx ¾”BSP EC16C – Cylinder Connector, C x FI (Swivel): EC16C –22F – 22mmx1”BSP EC16C –28F – 28mmx1”BSP EC16CF – Fitting Cylinder Connector, FTG x FI (Swivel): EC16CF –22F – 22mmx1”BSP EC16G – Gas meter union, C x FI (Swivel + Washer to BS746: EC16G –22E – 22mmx ¾”BSP EC16G –22F – 22mmx1”BSP EC16G –28F – 28mmx1”BSP EC17 – End Cap: EC17 – 6mm EC17 – 8mm EC17 – 10mm EC17 –12mm EC17 –15mm EC17 –18mm EC17 –22mm EC17 –28mm EC17 –35mm EC17 –42mm EC17 –54mm EC17 –66.7mm EC17 –76.1mm EC17 –108mm EC17 –133mm EC17 –159mm EC17A – Copper Airvent Cap, C x Cap Knurled cap air release: EC17A –15 - 15mm EC17A –22 – 22mm EC17AF - Copper Airvent Plug, Ftg x Cap Knurled cap air release: EC17AF –15 - 15mm EC20 – Elbow, C x C: EC20 – 6mm EC20 – 8mm EC20 – 10mm EC20 –12mm EC20 –15mm EC20 –18mm EC20 –22mm EC20 –28mm EC20 –35mm EC20 –42mm EC20 –54mm EC20 –66.7mm EC20 –76.1mm EC20 –108mm EC20 –133mm EC20 –159mm EC20F – Fitting (Street) Elbow, Ftg x C: EC20F – 10mm EC20F –12mm EC20F –15mm EC20F –18mm EC20F –22mm EC20F –28mm EC20F –35mm EC20F –42mm EC20F –54mm EC20F –66.7mm EC20F –76.1mm EC20F –108mm EC20FLS – Long Shank Fitting Elbow, Ftg (long) x C: EC20FLS –15mm EC20FLS –22mm EC20FLS –28mm EC20L – Long Radius Bend, C x C: EC20L – 10mm EC20L –12mm EC20L –15mm EC20L –18mm EC20L –22mm EC20L –28mm EC20L –35mm EC20L –42mm EC20L –54mm EC20L –66.7mm EC20L –76.1mm EC20L –108mm EC20L –133mm EC20L –159mm EC20LF- Long Radius Fitting Bend, Ftg x C: EC20LF – 10mm EC20LF –12mm EC20LF –15mm EC20LF –18mm EC20LF –22mm EC20LF –28mm EC20LF –35mm EC20LF –42mm EC20LF –54mm EC20LF –66.7mm EC20LF –76.1mm EC20LF –108mm EC25 – Obtuse Elbow (45/135 drg), C x C: EC25 – 10mm EC25–12mm EC25 –15mm EC25 –18mm EC25–22mm EC25 –28mm EC25 –35mm EC25 –42mm EC25 –54mm EC25 –66.7mm EC25 –76.1mm EC25 –108mm EC25 –133mm EC25 –159mm EC25F – Fitting Obtuse Elbow (45/135 drg), Ftg x C: EC25F – 10mm EC25F–12mm EC25F –15mm EC25F –18mm EC25F–22mm EC25F –28mm EC25F –35mm EC25F –42mm EC25F –54mm EC25F –66.7mm EC25F –76.1mm EC25F –108mm EC26 – Bent tap connector, C x Fi (swivel) + washer: EC26 –15D – 15mm x ½”BSP EC26 –15E – 15mm x ¾”BSP EC26 –22E – 22mm x ¾”BSP EC26C – Bent cylinder connector, C x Fi (swivel): EC26C –15E – 15mm x 3/4”BSP EC26C –22E – 22mm x ¾”BSP EC30 – Equal Tee, C x C x C: EC30 – 6mm EC30 – 8mm EC30 – 10mm EC30 –12mm EC30 –15mm EC30 –18mm EC30 –22mm EC30 –28mm EC30 –35mm EC30 –42mm EC30 –54mm EC30 –66.7mm EC30 –76.1mm EC30 –108mm EC30 –133mm EC30 –159mm EC31 – Reducing Tee, C x C x C (e.g. EC31 – 8810 – 8mm x 8mm x 10mm): EC31 –8810 EC31 –1088 EC31 –10810 EC31 –101012 EC31 –101015 EC31 –121010 EC31 –121012 EC31 –12128 EC31 –121210 EC31 –121215 EC31 –151010 EC31 –151015 EC31 –151212 EC31 –151215 EC31 –15158 EC31 –151510 EC31 –151512 EC31 –151518 EC31 –151522 EC31 –181515 EC31 –181518 EC31 –181812 EC31 –181815 EC31 –181822 EC31 –221515 EC31 –221522 EC31 –222210 EC31 –222215 EC31 –222218 EC31 –222228 EC31 –222235 EC31 –281515 EC31 –281522 EC31 –281528 EC31 –282215 EC31 –282222 EC31 –282228 EC31 –282815 EC31 –282822 EC31 –282835 EC31 –351535 EC31 –352222 EC31 –352235 EC31 –352822 EC31 –352828 EC31 –352835 EC31 –353515 EC31 –353522 EC31 –353528 EC31 –353542 EC31 –422242 EC31 –422828 EC31 –422842 EC31 –423535 EC31 –423542 EC31 –424215 EC31 –424222 EC31 –424228 EC31 –424235 EC31 –424254 EC31 –543535 EC31 –543554 EC31 –544242 EC31 –544254 EC31 –545415 EC31 –545422 EC31 –545428 EC31 –545435 EC31 –545442 EC31 –674267 EC31 –675467 EC31 –676728 EC31 –676735 EC31 –676742 EC31 –676754 EC31 –765476 EC31 –766776 EC31 –767642 EC31 –767654 EC31 –767667 EC31 –10810854 EC31 –10810867 EC31 –10810876 EC31 –13313367 EC31 –13313376 EC31 –133133108 EC31 –15915976 EC31 –159159108 EC31 –159159133 EB14 – Female Coupler, C x Fi: EB14 –8B – 8mm x ¼”BSP(F) EB14 –10B – 10mm x ¼”BSP(F) EB14 –10C – 10mm x 3/8”BSP(F) EB14 –12B – 12mm x ¼”BSP(F) EB14 –12C – 12mm x 3/8”BSP(F) EB14 –15B – 15mm x ¼”BSP(F) EB10M – Brass Manifold (e.g EB10m-22102 – 22mm x 10-2 mm): EB10M –22102 EB10M –22103 EB10M –22104 EB10M –2282 EB10M –2283 EB10M –2284 EB10P – Manifold Plug: EB10P – 108 – 10mm x 8mm EB11F2 – 2 in 1 Fitting reducer, Ftg x C: EB11F2 –15108 – 15mm x 10-8mm EG12 – Straight male coupler, C x Mi (taper): EG12 –15C – 15mm x 3/8”BSP (M) EG12 –15D – 15mm x 1/2”BSP (M) EG12 –15E – 15mm x 3/4”BSP (M) EG12 –22E – 22mm x ¾”BSP(M) EG12 –28F – 28mm x 1”BSP(M) EG12 –35G – 35mm x 11/4”BSP(M) EG12 –42H – 42mm x 11/2”BSP(M) EG12 –54I – 54mm x 2”BSP(M) EG12 –67J – 67mm x 21/2”BSP (M) EG12 –76K – 76.1mm x 3”BSP (M) EG12 –108L – 108 x 4”BSP(M) EG14 – Straight Female Coupler C x Fi: EG14 –15C – 15mm x 3/8”BSP (M) EG14 –15D – 15mm x 1/2”BSP (M) EG14 –15E – 15mm x 3/4”BSP (M) EG14 –22E – 22mm x ¾”BSP(M) EG14 –28F – 28mm x 1”BSP(M) EG14 –35G – 35mm x 11/4”BSP(M) EG14 –42H – 42mm x 11/2”BSP(M) EG14 –54I – 54mm x 2”BSP(M) EG14 –67J – 67mm x 21/2”BSP (M) EG14 –76K – 76.1mm x 3”BSP (M) EG14 –108L – 108 x 4”BSP(M) EB12 – Straight male coupler, C x MI (taper): EB12 –8B – 8mm x ¼”BSP(M) EB12 –10B – 10mm x ¼”BSP (M) EB12 –10C – 10mm x 3/8”BSP (M) EB12 –12B – 12mm x ¼”BSP(M) EB12 –12C – 12mm x 3/8”BSP (M) EB12 –15B – 15mm x ¼”BSP(M) EB12F – Male Stub adaptor Ftg x MI (taper): EB12F –8B – 8mm x ¼”BSP(M) EB12F –10B – 10mm x ¼”BSP (M) EB12F –10C – 10mm x 3/8”BSP (M) EB12F –12B – 12mm x ¼”BSP(M) EB12F –12C – 12mm x 3/8”BSP (M) EB12F –15B – 15mm x ¼”BSP(M) EB17A – Brass Airvent cap, C x Cap: EB17A –15mm EB17A –22mm EB17AF – Brass Airvent Plug, Ftg x Cap: EB17AF –15mm

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:

1305 Valves

Section Subtitle:

Flushing valve(s) for WC Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240402703

Size:

1 1/2” BSP (M)

Marking:

ECOTECH and Model on top of cap

Installation Requirements:

R001 R571 R581

Expiry date:

30/04/2029

Model:

B4620 B4621

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Range of WC dual flush drop valves with plastic bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Valves

Section Subtitle:

Flushing valve(s) for WC Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240402713

Size:

2” BSP (M)

Marking:

R&T logo and A2423 on body.

Installation Requirements:

R001 R571 R581

Expiry date:

30/04/2029

Model:

A2423L A2423M A2423H

Approval Holder:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

General Email

rt025@rtplumbing.com

View All Listings by this Company

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

General Email

rt025@rtplumbing.com

View All Listings by this Company