Directory Search Results

Print List

#2201107

Range of Ultraflow Air bubble top indirect and direct single coil unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 10.0 bar@90˚C. A safety kit (manifold) consisting of a single check valve assembly, verified by test (suitable for backflow prevention against fluid category 2), strainer, an expansion relief valve set at 8.0 bar and a pressure reducing valve set at 3.0 bar and a tundish is also provided. Alternative inlet control group and temperature and pressure relief valve added January 2023. Maximum working pressure: Secondary circuit: 7.5 bar. Primary circuit: 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1890 Unvented Heating Apparatus
Size:
Secondary circuit: 22mm compression. Primary circuit: 22mm compression. Return circuit: 22mm compression.
Marking:
Ultraflow Air on label on front of body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/01/2027
Model:
UOD120 – ULTRAFLOW AIR 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD150 – ULTRAFLOW AIR 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD170 – ULTRAFLOW AIR 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD200 – ULTRAFLOW AIR 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD250 – ULTRAFLOWAIR 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD300 – ULTRAFLOW AIR 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI120 – ULTRAFLOW AIR 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI150 – ULTRAFLOW AIR 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI170 – ULTRAFLOW AIR 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI200 – ULTRAFLOW AIR 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI250 – ULTRAFLOW AIR 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI300 - ULTRAFLOW AIR 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS120-ULTRAFLOW AIR SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS150-ULTRAFLOW AIR SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS170-ULTRAFLOW AIR SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS200-ULTRAFLOW AIR SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOIS120-ULTRAFLOW AIR SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS150-ULTRAFLOW AIR SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS170-ULTRAFLOW AIR SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS200-ULTRAFLOW AIR SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
L & M (HEATING) SUPPLIES LTD.
Company Name
L & M (HEATING) SUPPLIES LTD.
Address
103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX
Postcode
EN3 7PY

View All Listings by this Company

Print This Approval


#240902704

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection). Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUDR090 PLUDR120 PLUDR150 PLUDR180 PLUDR210 PLUDR250 PLUDR300 PLUDR090SL PLUDR120SL PLUDR150SL PLUDR180SL PLUDR210SL PLUDR180S PLUDR210S PLUDR250S PLUDR300S PLUDR400S PLUDR180SSL PLUDR210SSL PLUIN090 PLUIN120 PLUIN150 PLUIN180 PLUIN210 PLUIN250 PLUIN300 PLUIN400 PLUIN060SL PLUIN090SL PLUIN120SL PLUIN150SL PLUIN180SL PLUIN210SL PLUIN180S PLUIN210S PLUIN250S PLUIN300S PLUIN400S PLUIN180SSL PLUIN210SSL Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline
Product Images

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902705

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUIN180H PLUIN210H PLUIN250H PLUIN300H PLUIN180SH PLUIN210SH PLUIN250SH PLUIN300SH Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902706

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUHP180 PLUHP210 PLUHP250 PLUHP300 PLUHP400 PLUHP180S PLUHP210S PLUHP250S PLUHP300S PLUHP400S PLUHP180SL PLUHP210SL PLUHP200DUO PLUHP300DUO PLUHP200DUOPP PLUHP300DUOPP Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902707

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PRODR090 PRODR120 PRODR150 PRODR180 PRODR210 PRODR250 PRODR300 PROIN090 PROIN120 PROIN150 PROIN180 PROIN210 PROIN250 PROIN300 PROIN120PP PROIN150PP PROIN180PP PROIN210PP PROIN250PP PROIN300PP PROIN120PPSP PROIN150PPSP PROIN180PPSP PROIN210PPSP PROIN250PPSP PROIN300PPSR PROIN120PPSR PROIN150PPSR PROIN180PPSR PROIN210PPSR PROIN250PPSR PROIN300PPSR Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 671 of 801

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.