Directory Search Results

Fittings Materials
Print List

#240502702

Range of dual flush, WC outlet valves with an ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240502702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” BSP(M)
Marking:
Bestter logo & model on body.
Installation Requirements:
R001 R571 R581
Expiry date:
31/05/2029
Model:
T8105 T8106
Product Images
Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
9-10 Building Siming, Tong‘an Industrial Center, Xiamen,Fujian,China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
9-10 Building Siming, Tong‘an Industrial Center, Xiamen,Fujian,China

View All Listings by this Company

Print This Approval

#240502716

Range of height adjustable WC syphonic dual flush valves with polypropylene bodies and stainless-steel links. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240502716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” BSP (M)
Marking:
Viva Sanitary logo on the top of flush valve body
Installation Requirements:
R001 R571 R581
Expiry date:
31/05/2029
Model:
AS01 AS01/3P
Product Images
Approval Holder:
Mercantile Ventures Ltd ta Viva Sanitary
Company Name
Mercantile Ventures Ltd ta Viva Sanitary
Address
Units 1-3 Capitol Trading Park Liverpool
Postcode
L33 7SY
Country
United Kingdom
General Email
allan.hanson@vivasanitary.co.uk

View All Listings by this Company

Print This Approval

#240402716

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240402716
Size:
1 1/2” BSP (M)
Marking:
Flomasta (Brand of Kingfisher) on top of cap WRAS on body
Installation Requirements:
R001 R571 R581
Expiry date:
30/04/2029
Model:
C10100849 & C10100850
Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval

#240402717

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
240402717
Size:
1 1/2” BSP (M)
Marking:
Flomasta (Brand of Kingfisher) on top of cap WRAS on body
Installation Requirements:
R001 R571 R581
Expiry date:
30/04/2029
Model:
C10100849 & C10100850
Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval

#240504713

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Company logo (AO Smith), model, and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
IR 12-160,IR 12-200,IR 20-160,IR 20-200,IR 24-245,IR 24-285,IR 32-245,IR 32-285 & IR 32-380
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504714

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Company logo (A.O. Smith), model and technical information on body
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
BFC 28, BFC 30, BFC 50, BFC 60, BFC 80, BFC 100, BFC 120, SGS 28, SGS 30,SGS 50, SGS 60, SGS 80, SGS 100 & SGS 120
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504715

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” BSP(M) inlet.
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
SGE 40 & SGE 60
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504716

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F)
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
IT 1500, IT 2000, IT 2500, IT 3000, ST 1500, ST 2000, ST 2500 & ST 3000
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504717

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F)
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
TWI 35-200 & TWI 45-200
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval

#240504718

Range of stainless steel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” BSP (M)
Marking:
Company logo (AO Smith), model and technical information on body.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
IT 300, IT 400, IT 500, IT 600, IT 750, IT 1000, ITE 400, ITE 500, ITE 600, ITE 750, ITE 1000, ITS 300, ITS 400, ITS 500, ITS 600, ITS 750, ITS 1000, ST 300, ST 400, ST 500, ST 600, ST 750 & ST 1000
Product Images
Approval Holder:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company
Manufacturer:
A.O.Smith Water Products Company B.V.
Company Name
A.O.Smith Water Products Company B.V.
Address
De Run 5305 Veldhoven
Postcode
5503 LW
Country
Netherlands
Phone
+31 (0) 40 294 2560
General Email
hmichiels@aosmith.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 670 of 1011

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.