| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EMB20CP | CHROME | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20BN | BRUSHED NICKEL | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20MB | MATT BLACK | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20AB | ARTISAN BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20BB | BRUSHED BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator | |
| EMB20PB | PATINATED BRASS | 1/2" BSP | 5 bar | 65 °C | cleanwater | on bottom of faucet | No | Ceramic Cartridge | C-plate | Aerator |
A range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. The products are supplied with a loose brass ½” BSP (M) x ½” BSP (F) adaptor for installation on the cold inlet. This adaptor incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2044-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2034-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2033-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2032-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 2031-XX | Various | ¾” BSP (M) | 10 bar | 60 °C | CARLOTA | Body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
1.For the series 2044-XX,2034-XX,2033-XX,2032-XX,2031-XX, the only difference is handle style. 2.XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass,BN=Brushed nickel,GM=Gun Metal.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1001JC45 | Chrome | ½” BSP (M) x ¾” BSP (M) offset union | 10 bar | 85 °C | HUANRI | Rear of body | No | Aerator |
Range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork, with cubed/lever type operating members, diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button and cubed/lever type operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Range of brass press fittings for use with MLC PE-RT/AL/PE-RT pipe. Maximum operating pressure 10 bar. Maximum operating temperature 80°C
Range of press fittings (brass bodies) “KMU” with stainless steel press (‘U’ profile) collars and EPDM O-rings for use with “KELOX” range of PERT/AL/PERT multilayer pipe (‘butt welded’ variant 16mm-63mm & ‘lap welded’ variant 16mm-20mm). Maximum working pressure: 10 bar. Maximum operating temperature: 85°C.
Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)
MBC 12-22WM & MBC 12-28WM models are wall mounted mains supply booster sets. They are supplied with two spherical isolation valves, a spherical bypass valve and two single check valve assemblies (suitable for backflow protection against Fluid Category 2). The check valve assemblies are to be installed in accordance with the manufacturers instructions, one upstream of the pump inlet and one after the bypass valve. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet and is housed within a wall mounted cabinet. MJ3 VM & MJ3 HM models are mains supply booster sets intended to be mounted on an expansion vessel (not supplied as part of the approval). They comprise of a pump, a suction and discharge manifold with bypass arrangement, and a spherical bypass valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet. Maximum working pressure: 6.0 bar. Maximum operating temperature: 35oC.
Page 67 of 73
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
