Directory Search Results

Print List

#240904025

Range of plastic braided PEX lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
240904025
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP(F) captive nut.
Marking:
Tucai, date of manufacture (YYYY.MM.DD), WRAS stamped on ferrules.
Installation Requirements:
R001 R008
Expiry date:
30/09/2029
Model:
TUCAINNECT Range: 210510 hose length 410 mm and 450 mm and one overmolded base from one side and overmolded nipples from the other 210511 hoses length 450 mm and 490 mm and one overmolded base from one side and overmolded nipples from the other 210512 hoses length 490 mm and 530 mm and one overmolded base from one side and overmolded nipples from the other 210513 hoses length 530 mm and 570 mm and one overmolded base from one side and overmolded nipples from the other 210514 hoses length 570 mm and 610 mm and one overmolded base from one side and overmolded nipples from the other
Product Images

Approval Holder:
Tucai, S.A.
Company Name
Tucai, S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company

Print This Approval


#241202063

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). For use with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202063
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
T01001 - 15mm Brass C (Compression) and ½” F (Female) T01002 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01003 -15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01004 -15mm Brass C (Compression) and ½” Plastic F (Female) T01005 - 15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01006 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01007 - 22mm Brass C (Compression) and ¾” Plastic F (Female) T01008 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01009 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01010 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01011 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01012 - 15mm Brass C (Compression) and 15mm Brass C (Compression) T01013 - 22mm Brass C (Compression) and 22mm Brass C (Compression) T01014 - 15mm Brass C (Compression) and ½” Brass F (Female) T01015 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01016 - 22mm Brass C (Compression) and 3/4” Plastic F (Female) T01017 - ½” Brass F (Female) and ½” Brass F (Female) T01018 - 15mm Hydra Pushfit (P) and 15mm Hydra Pushfit (P) T01019 - 22mm Hydra Pushfit (P) and 22mm Hydra Pushfit (P) T01020 - 15mm Hydra Pushfit (P) and ½” Plastic F (Female) T01021 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01022 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01023 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01024 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01025 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01026 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01027 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01028 - 15mm Brass C (Compression)and 1/2” Brass FE (Female Elbow) T01029 - 15mm Brass C (Compression) and 1/2” Brass FE (Female Elbow) T01030 - 15mm Hydra Pushfit (P) and 1/2” Brass FE (Female Elbow) T01031 - 10mm Brass Male (M) and 15mm Brass C (Compression) T01032 - 12mm Brass Male (M) and 15mm Brass C (Compression) T01033 - 10mm Brass Male (M) and 15mm Hydra Pushfit (P) T01034 - 12mm Brass Male (M) and 15mm Hydra Pushfit (P)

Approval Holder:
UK Plumbing Supplies Ltd
Company Name
UK Plumbing Supplies Ltd
Address
Quayside 2A Wilderspool Park Greenalls Avenue Cheshire
Postcode
WA4 6HL

View All Listings by this Company
Manufacturer:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200

View All Listings by this Company

Print This Approval


#250102704

Range of unvented storage cylinders. The secondary circuit is fitted with a temperature and pressure relief valve set at 7.0 bar at 90˚C and an expansion relief valve set at 6.0 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also Supplied with an expansion vessel and tundish. Maximum working pressures: Primary circuit: 5.5 bar Secondary circuit: 6.0 bar Solar circuit:6.0 bar Maximum operating temperature 85.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression all connections
Marking:
Joule, model name, capacity, pressure ratings and other technical information on adhesive label on cylinder
Installation Requirements:
R001 R140 R360
Expiry date:
31/01/2030
Model:
TRSMVD-0090LFC TRSMVD-0120LFB TRSMVD-0150LFB TRSMVD-0180LFB TRSMVD-0210LFC TRSMVD-0250LFC TRSMVD-0300LFC TRSMVI-0090LFC TRSMVI-0120LFB TRSMVI-0150LFB TRSMVI-0180LFB TRSMVI-0210LFC TRSMVI-0250LFC TRSMVI-0300LFC TRSMVS-0150LFB TRSMVS-0180LFB TRSMVS-0210LFC TRSMVS-0250LFC TRSMVS-0300LFC
Product Images

Manufacturer:
Joule Hot Water Systems UK Ltd
Company Name
Joule Hot Water Systems UK Ltd
Address
Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Print This Approval


#250302708

Range of indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: Primary circuit: 6.0 Bar Secondary circuit: 5.5 bar Maximum operating temperature: 85.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Primary circuit: 1” BSP (F) Secondary circuit: 22mm compression
Marking:
Joule logo, model and technical information on adhesive label on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2030
Model:
TRJMVH -0150LFB 150 Cyclone Plus High Gain Indirect Standard TRJMVH -0180LFB 180 Cyclone Plus High Gain Indirect Standard TRJMVH -0210LFC 210 Cyclone Plus High Gain Indirect Standard TRJMVH -0250LFC 250 Cyclone Plus High Gain Indirect Standard TRJMVH -0300LFC 300 Cyclone Plus High Gain Indirect Standard TRJMVH -0150SFB 150 Cyclone Plus High Gain Indirect Slim TRJMVH -0180SFB 180 Cyclone Plus High Gain Indirect Slim TRJMVH -0210SFC 210 Cyclone Plus High Gain Indirect Slim
Product Images

Manufacturer:
Joule Hot Water Systems UK Ltd
Company Name
Joule Hot Water Systems UK Ltd
Address
Unit 3, Leftfield Park, Park Road Pontefract, West Yorkshire WF8 4PS

View All Listings by this Company

Print This Approval


#250304703

Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
250304703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Fastec® F13 internal Ø 20.75 - 20.93mm
Marking:
Teco logo, DN, PN, year and batch/month (YYMM) and F13 on body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
Manifold with valve on each outlet: DN2309727: DN10 Manifold 2 ways F13F, DN2105548: DN10 Manifold 3 ways F13F, DN1901798: DN10 Manifold 4 ways F13F, DN1901797: DN10 Manifold 5 ways F13F, DN2309733: DN10 Manifold 6 ways F13F, Manifold with valve on inlet: DN2410745: DN15 Manifold 4 ways F13F, DN1901854: DN15 Manifold 5 ways F13F.
Product Images

Manufacturer:
TECO Srl
Company Name
TECO Srl
Address
Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 651 of 699

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.