Directory Search Results

Print List

#2204324

Under counter electric instantaneous water heater with a stainless steel tank. The flow is controlled via a solenoid valve. The product is supplied with a 3 way isolation valve (15mm compression x 15mm compression x ¾” BSP (M)), as well as a filter head and filter cartridge for installation prior to the under counter unit. LLDPE tubing and pushfit connections are provided for connecting between these items. The filter head inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the under counter unit incorporates a combined silicone washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.5 bar. Maximum operating temperature 98˚C. Cold water supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2204324
Note:
R120, R150 & R170 apply to the filter cartridge.
Size:
15mm compression (to 3 way inlet valve).
Marking:
Proboil.4E on front casing. Pressure, model, serial number and other technical information on adhesive label on rear of body.
Installation Requirements:
R001 R008 R120 R150 R170 R040
Expiry date:
30/04/2027
Model:
PROBOIL4E - model code: PT1030RMC.

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#2201345

Range of wall mounted, gas-fired, condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and a pressure relief valve set at 3.0 bar. The inlets to the domestic hot water and primary circuits each have a screwdriver operated angled spherical valve. Both include a ½” BSP (M) connection for a filling link. The Greenstar CDi models only are supplied with an integral charging link (CAB device) verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure of the primary circuit is 2.5 bar. Maximum working pressure of the secondary circuit is 10.0 bar. Maximum operating temperature of primary circuit is 82°C. Maximum operating temperature of secondary circuit is 60°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2201345
Size:
Secondary: 15mm compression. Primary: 22mm compression.
Marking:
Worcester and Wocester logo on front cover. Worcester, Worcester logo, model number, pressure, temperature and other technical information on data label inside boiler. (Worcester is a brand of Bosch).
Installation Requirements:
R001 R360
Expiry date:
31/01/2027
Proviso:
Greenstar CDi models: Supplied with a filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999. Greenstar Si models: Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
7-733-600-056 Greenstar 36CDi Compact ErP, 7-733-600-059 Greenstar 36CDi Compact ErP LPG, 7-733-600-055 Greenstar 32CDi Compact ErP, 7-733-600-058 Greenstar 32CDi Compact ErP LPG, 7-733-600-054 Greenstar 28CDi Compact ErP, 7-733-600-057 Greenstar 28CDi Compact ErP LPG, 7-733-600-050 Greenstar 25Si Compact ErP, 7-733-600-051 Greenstar 25Si Compact ErP LPG, 7-733-600-052 Greenstar 30Si Compact ErP, 7-733-600-053 Greenstar 30Si Compact ErP LPG.

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2204058

Hydraulic block assembly comprising of a flow regulator, central heating pump assembly and a stainless-steel plate heat exchanger. Maximum working pressures: DHW circuit: 10.0 Bar Central heating circuit: 2.5 Bar Maximum operating temperature: DHW Circuit: 65.0°C Central heating circuit: 90.0°C

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2204058
Size:
DHW Circuit: ½” BSP (M) Central heating circuit: ¾” BSP (M)
Marking:
KD, made in KOREA on adhesive label on pump casing and motorized valve. NAIVIEN on pump casing
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
NCB 300 Range: 30029242 28kW 30029241 37kW 30029112 41kW

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval


#2205056

Hydraulic block incorporating heat exchangers with pressed stainless-steel plate bodies and copper brazing. Product also incorporates primary and secondary water way with PPS plastic fittings and adaptors and a flow adjustment valve. Maximum operating temperature: Central Heating Circuit: 90°C, Direct Hot Water Circuit: 65°C. Maximum working pressure: Central Heating Circuit: 2.5 bar, Direct Hot Water Circuit: 10 bar.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2205056
Size:
DHC: ½” BSP (M) inlet and outlet CH: ¾” BSP (M) inlet and outlet
Marking:
KD One and model on adhesive label, Navien on pump housing.
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
NCB500 HYDRAULIC BLOCK RANGE: 30029106 & 30029299

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval


#2112358

(Jet) range of water meters with either ductile iron (171259 & 171279 models) or brass (all other models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
JET & technical info on dial. Flow arrow & size on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
171243, 171253 & 171273 – ¾” BSP (M). 171244, 171254 & 171274 – 1” BSP (M). 171255, 171275 & 171256 – 1 ¼” BSP (M). 171256 & 171276 – 1 ½” BSP (M). 171257 & 171277 – 2” BSP (M). 171258 & 171278 – 2 ½” BSP (M). 171259 & 171279 – DN50 flange.

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2205330

Water meter incorporating a stop valve, with plastic body and NBR ‘O’-rings. For use with copper pipe manufactured in accordance with EN1057 and plastic PEX pipe manufactured in accordance with BS7291 Class S. Maximum working pressure 10.0 bar. Cold water use only

Section:
1505 Water Meters
WRAS Approval Number:
2205330
Note:
Claims of leak detection made by the manufacturer have not been tested and are not covered by this approval.
Size:
22mm push fit.
Marking:
Creative EC, waterfall, year of manufacurter (YYYY), serial number and other technical information on adhesive label on body Waterfall, flow arrow and other technical information printed on face Additional marking from June 2022: UKCA on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
CEC-WF-22-PF

Approval Holder:
Creative EC Limited
Company Name
Creative EC Limited
Postcode
EC4 1AE

View All Listings by this Company

Print This Approval


#2207802

Range of aerators with plastic bodies and chrome plated brass housing. Open outlet use only. Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Size:
SEE MODELS
Marking:
Neoperl on housing
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
01.0412.0 ATOMIZER TT SINGLE-JET 0.25 F M16X1: M16x1 thread 01.0413.0 ATOMIZER TT SINGLE-JET 0.25 M M18X1: M18X1 thread 01.0418.0 ATOMIZER STD TRIPLE-JET M M24X1: M24X1 thread 01.0419.0 ATOMIZER STD TRIPLE-JET F M22X1: M22X1 thread 01.0420.0 ATOMIZER TRIPLE-JET M M24X1.5: M24X1.5 thread 01.0421.0 CACHÉ ATOMIZER M M24X1.5: M24X1.5 thread 01.0424.0 ATOMIZER STD SINGLE-JET F M22X1: M22X1 thread 01.0423.0 ATOMIZER STD SINGLE-JET M M24X1: M24X1 thread 01.0425.0 ATOMIZER STD SINGLE-JET 0.25 M M24X1: M24X1 thread 01.0426.0 ATOMIZER STD SINGLE-JET 0.25 F M22X1: M22X1 thread

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2204310

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor and a pressure vessel. The CSBPXXX-XX-A models incorporate a non-return valve integral to the pump chamber. The CSBPXXX-XX-B(-N) models added January 2026 incorporate a non-return valve on the inlet and outlet port. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204310
Size:
1” BSP (F)
Marking:
Cacheng, (Ningbo Cacheng Machinery & Electric Co.Ltd.) logo and model number & other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2027
Model:
Intelligent Water Booster Pump: CSBP370-25-A, (370W), 25m (Rated Head), CSBP550-24-A, (550W), 24m (Rated Head), CSBP750-30-A, (750W), 30m (Rated Head), CSBP550-22-Z-A (550W), 22m (Rated Head), CSBP750-28-Z-A (750W), 28m (Rated Head), CSBP850-30-A, (850W), 65m (Rated Head). Models added January 2026: Intelligent Water Booster Pump: CSBP370-25-B, CSBP550-24-B, CSBP750-30-B, CSBP900-30-B, CSBP1100-30-B, CSBP370-25-B-N, CSBP550-24-B-N, CSBP750-30-B-N, CSBP900-30-B-N, CSBP1100-30-B-N. -N suffix denotes self-priming models.

Approval Holder:
Ningbo Cacheng Machinery & Electric Co., Ltd.
Company Name
Ningbo Cacheng Machinery & Electric Co., Ltd.
Address
17/F, King Hall, No. 1, Lane 42, Xingning Road, Ningbo
Country
China

View All Listings by this Company

Print This Approval


#2204014

Range of brushless DC centrifugal pumps with a plastic body. Maximum working pressure 1.0 Bar. Maximum operating temperature 70°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204014
Size:
OD 22.9mm X OD 16.5mm
Marking:
TRITON and Triton logo on body. Brushless DC pump, CE and other technical info on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2027
Model:
TL-C01-TA24-2411. TL-C01/5V-TA24-2411(-T-Wx04695).

Approval Holder:
Triton Showers (Part of Norcros Group Holdings)
Company Name
Triton Showers (Part of Norcros Group Holdings)
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
07779013141
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company
Manufacturer:
Tops Industry and Technology Co. Ltd.
Company Name
Tops Industry and Technology Co. Ltd.
Address
No 519 International Innovation Park Zhenhua Road Yuhua District Changsha City Hunan Province
Country
China
General Email

View All Listings by this Company

Print This Approval


#2204353

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204353
Size:
1” BSP (F)
Marking:
Stuart Turner and model number other technical information on adhesive label on body. Model on body
Installation Requirements:
R001 R415
Expiry date:
30/04/2027
Model:
VariQ Water Booster Pumps Rated Head: VariQ Part No. 47500 (370W), 25m VariQ Part No. 47498 (550W), 24m VariQ Part No. 47322, (750W), 30m VariQ Part No. 47499 (550W), 22m VariQ Part No. 47497 (750W), 28m VariQ Part No. 47501 (850W), 65m Addition to range February 2023: VariQ Part No. 47510, (750W), 30m

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 65 of 445

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.