Range of wall mounted, bar type, thermostatic shower mixers (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with a dome type or single lever operating member (see model) controlling the flow between each shower outlet. The temperature is controlled independently via a thermostatic cartridge with a dome type or single lever operating member (see model) incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All models, except the X-KCTD model are supplied with an overhead shower rose. All products are supplied with a shower hose. All models are supplied with a shower handset, except for the X- prefix models. The following models incorporate additional items on the inlets to the overhead shower or shower handset: KCTSDEF, KCTSDEFMH: Overhead shower and shower handset with a stainless steel strainer and flow restrictor on the inlet. AOSCTSDEF, SJKRDS01CP & SJKRDS01BK: Overhead shower with a stainless steel strainer and flow restrictor on the inlet, shower handset with a plastic flow regulator on the inlet. AOKCTSDEF, RUDCTSDEF: Shower handset with a plastic flow regulator on the inlet. DCTWDEF: Overhead shower with a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet, shower handset with a plastic flow regulator on the inlet. KHCTADEF, KRCTADEF, ASCTADEF: Overhead shower and shower handset with a plastic flow regulator on the inlet. X-ASCTADEF: Overhead shower with a plastic flow regulator on the inlet. X-AOSCTSDEF: Overhead shower with a stainless steel strainer and flow restrictor on the inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated, ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of handwheel & gear operated butterfly valves with blue epoxy coated ductile iron bodies and discs and EPDM rubber seat. Maximum working pressure 16.0 bar. Cold water use only. Maximum operating temperature 85°C (from Sept 2021)
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of wafer or lugged butterfly valves incorporating blue epoxy coated ductile iron bodies, EPDM seats and stainless steel or ductile iron discs (nickel plated). The products are supplied with either bare shaft or with lever or gear operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of wafer and lugged type butterfly valves incorporating blue epoxy coated cast iron bodies, stainless steel discs and EPDM seat. The closing mechanism can be controlled by either a lever, gear or bore shaft. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of wafer, lugged and flanged butterfly valves with blue epoxy coated ductile iron bodies, zinc coated (galvanised) discs and EPDM seats. D71X4, D71XLV4 & D41X4 models incorporate a hand wheel operating members and D371X4, D371XLV4 & D341X4 incorporate a worm gear operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of in-line manually adjustable pressure reducing valves with blue epoxy coated cast iron bodies, stainless steel cartridges, EPDM diaphragm and seals. Adjustable outlet pressures in the range of: D15S-50A - DS15S-100A = 1.5 to 7.5 bar. D15S-150A - DS15S-200A = 1.5 to 8.0 bar. Models added April 2023: D15SN-50A - DS15SN-100A = 0.5 to 2.0 bar. Maximum supply pressure 16.0 bar. D15S-150A and D15S-200A models: Cold water use only. All other models have non-metallic material suitable for up to 60°C.
Page 63 of 220
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
