Directory Search Results

Print List

#2212364

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212364
Size:
½” BSP (M).
Marking:
Crosswater Logo & model code on fixed plate. 6L waterline on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
WCF114X59R WCC51X51R without Iron Frame

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2112369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112369
Size:
½” BSP (M)
Marking:
Ideal Standard, actuation method, product date (DD/MM/YYYY) & Ideal Standard on flush plate 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L R031667 Prosys 150 WC cistern Pneu CL2 6L R042967 Prosys 150 WC cistern 820mm high Pneu CL2 6L R014267 Prosys 150 WC cistern Mech CL2 6L R042867 Prosys 150 WC cistern 820mm high Mech CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2109071

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109071
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Smart Line nk Porcelanosa Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294198 100294217

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#240602711

Range of spring loaded resilient trim check valve cartridges with plastic bodies, stainless steel spring and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 16 Bar Maximum operating temperature 65°C (model OV15/DN15-EPDM 31.0001.0 only) Maximum operating temperature 85°C for all other models

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240602711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Neoperl, size, flow arrow and WRAS on body Note: flow arrow is not on model 31.0022.0
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
OF15/DN10-F1 31.0015.0 MODELS ADDED OCTOBER 2024 OF15/DN15-HT 31.0024.0 OV15/DN15-HT 31.0022.0 MODELS ADDED NOVEMBER 2024 OF15/DN10-F1-pr 31.0074.0 OF15/DN15 31.0006.0 OF15/DN15-GF 31.0007.0 OF15/DN15-pr 31.0069.0 OV15/DN15-EPDM 31.0001.0 Models added December 2024: OV15/DN15-pr 31.0070.0 OF15/DN15-EPDM 31.0032.0 Models added December 2024 OF20/DN20 31.4520.0 OF20/DN20-EPDM 31.0057.0 OF20/DN20-PR 31.4289.0 OV20-DN20-pr 31.0072.0 OV40/DN40 31.4240.0 OV50/DN50 31.4250.0
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#240602006

Range of aerators with plastic bodies and EPDM ‘O’-rings. Model (SB-BTA) incorporates a (chrome plated brass) housing. Maximum operating temperature 85°C

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
240602006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Model
Marking:
SB-BTA – SHOWERBOB on Aerator housing SB-ITA- SB logo on Aerator
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
SB-BTA - M24 (M) SB-ITA -18.19 OD
Product Images

Approval Holder:
BOB Products Limited
Company Name
BOB Products Limited
Address
Avalon House High Street Chalford Stroud Gloucestershire
Postcode
GL6 8DS
Country
United Kingdom
General Email
nigel@showerbob.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 617 of 800

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.