Directory Search Results

Print List

#2205063

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205063
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/05/2027
Model:
A7554AA Sensorflow Basin mixer panel mounted Mix Battery. A7555AA Sensorflow Basin mixer panel mounted Mix Mains.

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106053
Size:
1/2” BSP (M).
Marking:
Vitra, flush volume and model number inside cistern. Vitra on front of cistern
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval


#2208800

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass or nickel plated DZR brass body. Compression models are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2208800
Size:
see model
Marking:
Altecnic logo, flow arrorw, CR and size mould on body Model added September 2022 Altecnic logo, size, PN, CR, direction of flow arrow on body of valve
Installation Requirements:
R001
Expiry date:
31/08/2027
Model:
BI-100034 – 15mm compression x 15mm compression BI-100S22 - 22mm compression x 22mm compression ALT-SCV015 - ½” BSP (F) X ½” BSP (F) ALT-SCV020 - ¾” BSP (F) X ¾” BSP (F) ALT-SCV025 - 1” BSP (F) X 1” BSP (F) ALT-SCV032 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV040 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV050 - 1 ½” BSP (F) X 1 ½” BSP (F) ALT-SCV060 - 2” BSP (F) X 2” BSP (F) Model added September 2022 BI-100S28-28mm compression x 28mm compression

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval


#2206021

Range of pre insulated hot press moulded GRP sectional cisterns with butyl seals and stainless-steel bolts. Cisterns are supplied with a float operated inlet valve, screened overflow and screened vent. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
2206021
Size:
1m3 – 400m3
Marking:
Decca plastics, Decca plastics logo, nominal capacity, actual capacity, model, product info on label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
30/06/2027
Model:
DPXXXXXX DP company initials XXXXXX = size of tank in metres - i.e. DP101010 = 1.0m x1.0m x1.0m
Product Images

Approval Holder:
Decca Plastics UK Ltd.
Company Name
Decca Plastics UK Ltd.
Address
Victoria Mill, Lincoln Street, Preston
Postcode
PR1 6RE
Country
Lancashire
Phone
+44 (0) 1772 725 757

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 610 of 2310

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.