`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm Spigot inlet x 1/2" BSP (M) outlet

Marking:

Y Stern logo on sensor unit

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Product Images

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of click type pop-up wastes (brass or plastic bodies - various finishes, see model).

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240702708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1¼” BSP (M).

Marking:

ISI on body

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Plastic body: S8803XX, B952298XX Brass body: E1482XX, B953262XX Where XX denotes finish and can be replace by: All models: AA = Chrome. B953262XX model only: A2 = Brushed Gold, A5 = Magnetic Grey, GN = Silver Storm, XG = Silk Black.

Product Images

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of multistage pumps with brass impellers and stainless steel shaft, incorporating an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240704721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

Tucson, model number, product name and other technical parameters on adhesive label on terminal box; Tucson etched on pump head.

Installation Requirements:

R001 R415

Expiry date:

31/07/2029

Model:

Positive Head Twin Impeller Shower Pump SBT-2 Maximum head: 2 Bar Rated power: 0.5kW SBT-3 Maximum head: 3 Bar Rated power: 0.67kW SBT-4 Maximum head: 4 Bar Rated power: 0.9kW Positive Head Single Impeller Shower Pump SBS-3 Maximum head: 3 Bar Rated power: 0.37kW Universal Head Twin Impeller Shower Pump UBT-2 Maximum head: 2 Bar Rated power: 0.5kW UBT-3 Maximum head: 3 Bar Rated power: 0.67kW UBT-4 Maximum head: 4 Bar Rated power: 0.9kW Universal Head Single Impeller Shower Pump UBS-3 Maximum head: 3 Bar Rated power: 0.37kW

Product Images

Approval Holder:

Tucson Pumps Ltd.

Company Name

Tucson Pumps Ltd.

Address

Instantor Works, Santry Avenue, Dublin, D09 K160

Country

Ireland

View All Listings by this Company

Range of single or twin shower pumps with brass bodies, brass impeller supplied with flexible connection hoses that incorporate servicing valves. Maximum Working pressure 6 Bar Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240704724

Size:

ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). OEM 44741: Monsoon U4.5 bar Single: ¾” BSP (M) (inlet/outlet) (No hose provided). All other models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Adhesive label on body stating Stuart Turner, model no, serial no, part no, pressure rating, Monsoon, Manufacturer address and other technical information Expansion vessel labelled with volume and pressure rating

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

46505: Monsoon U1.5 bar Twin, 46498: Monsoon U2.0 bar Single, 46480: Monsoon U2.0 bar Twin, 46414: Monsoon U4.5 bar Single, 46413: Monsoon U3.0 bar Single, 46412: Monsoon U4.5 bar Twin, 46411: Monsoon U4.0 bar Twin, 46410: Monsoon U3.0 bar Twin, OEM 44741: Monsoon U4.5 bar Single, 44427: Monsoon U3.0 bar Twin, 44426: Monsoon U2.0 bar Twin, 44425: Monsoon U2.0 bar Single, OEM 44340: Monsoon U2.0 bar Twin, 44753: Monsoon U1.5 bar Twin, 46505ROI: Monsoon U1.5 bar Twin, 46498ROI: Monsoon U2.0 bar Single, 46480ROI: Monsoon U2.0 bar Twin, 46414ROI: Monsoon U4.5 bar Single, 46413ROI: Monsoon U3.0 bar Single, 46412ROI: Monsoon U4.5 bar Twin, 46411ROI: Monsoon U4.0 bar Twin, 46410ROI: Monsoon U3.0 bar Twin, 46505EXP: Monsoon U1.5 bar Twin, 46498EXP: Monsoon U2.0 bar Single, 46480EXP: Monsoon U2.0 bar Twin, 46414EXP: Monsoon U4.5 bar Single, 46413EXP: Monsoon U3.0 bar Single, 46412EXP: Monsoon U4.5 bar Twin, 46411EXP: Monsoon U4.0 bar Twin, 46410EXP: Monsoon U3.0 bar Twin.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only. ‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240707001

Note:

Approval doesn’t include pressure vessels.

Size:

Small Booster Sets Systems with 2 to 3 Pumps = 2” BSP (M), Systems with 4 to 6 pumps = 2½” BSP (M). Medium Booster Sets Systems with CRI(E)10 pumps: Systems with 2 to 3 pumps = 2½” BSP (M), Systems with 4 to 5 pumps = DN80 flanges, Systems with 6 pumps = DN100 flanges. Systems with CRI(E)15 and CRI(E)20 pumps: Systems with 2 pumps = DN80 flanges, Systems with 3 to 4 pumps = DN100 flanges, Systems with 5 to 6 pumps = DN150 flanges. Sizes added November 2024: Large Booster Sets Systems with CR(E)32 pumps: Systems with 2 pumps = DN100 flanges, Systems with 3 to 6 pumps = DN150 flanges. Systems with CR(E)45 and CR(E)64 pumps: Systems with 2 pumps = DN150 flanges, Systems with 3 to 6 pumps = DN200 flanges.

Marking:

Grundfos logo, model, serial number, P/N, manufacturing country and technical information on adhesive label on base frame.

Installation Requirements:

R001 R008 R415

Expiry date:

31/07/2029

Model:

Small Booster Sets (PN16): HYDRO MPC-E “X” CRIE3, HYDRO MPC-E “X” CRIE5, HYDRO MPC-F “X” CRI3, HYDRO MPC-F “X” CRI5, HYDRO MPC-S “X” CRI3, HYDRO MPC-S “X” CRI5. Medium Booster Sets (PN16): HYDRO MPC-E “X” CRIE10, HYDRO MPC-E “X” CRIE15, HYDRO MPC-E “X” CRIE20, HYDRO MPC-F “X” CRI10, HYDRO MPC-F “X” CRI15, HYDRO MPC-F “X” CRI20, HYDRO MPC-S “X” CRI10, HYDRO MPC-S “X” CRI15, HYDRO MPC-S “X” CRI20. Models added November 2024: Large Booster Sets (PN16): HYDRO MPC-E “X” CRE32, HYDRO MPC-E “X” CRE45, HYDRO MPC-E “X” CRE64, HYDRO MPC-F “X” CR32, HYDRO MPC-F “X” CR45, HYDRO MPC-F “X” CR64, HYDRO MPC-S “X” CR32, HYDRO MPC-S “X” CR45, HYDRO MPC-S “X” CR64. The “X” preceding CR indicates the number of pumps in the booster set, between 2 and 6 pumps. The number following the pump type designation (e.g.: 32, 45 and 64) indicates the flow rate of the pump in m³/h. Full code example: Hydro MPC-E 2 CRE32-2-U2D-A-A-GHJ Where: Hydro MPC = Product name. -E = System type; All pumps with E-motor or CUE, and can also be -F for Fixed-speed pumps, 1 CUE or -S for Fixed-speed pumps. 2 = Number of pumps, this can be any number between 2 and 6. CRE = Pump type, can also be pumps beginning CR, CRI or CRIE. 3, 5, 10, 15, 20, 32, 45, 64 = flow rate of the pump in m³/h. U2 = Voltage, can also be U1, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD or UX. D = Design, can also be A, B, C, E, F, G, H, I or W. -A = Starting method; E (speed control). -A = Material combination; Stainless steel manifold, base frame and standard valves. -HJ = Options;, H - Dry-running protection, J - Redundant sensor.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company